304576 - Webcam Aplic - Free user manual and instructions

Product Type	Webcam
Brand	Aplic
Model	304576
Connection	USB 2.0 (integrated cable)
Maximum Resolution	1080p (1920x1080) at 30 fps
Microphone	Built-in stereo
Autofocus	Yes, automatic focus
Privacy Shutter	Yes (privacy shutter)
Operating Indicator	Blue LED
Mounting	Monitor clip and standard tripod mount
Viewing Angle	Approximately 70° (not specified)
Focal Length	Fixed (built-in autofocus)
Housing Material	ABS plastic
Weight	Approximately 100 g
Dimensions (L x H x D)	Approximately 8 x 4 x 4 cm
Power Supply	Via USB port (5 V, 500 mA)
Compatible Operating Systems	Windows, macOS, Chrome OS (Plug & Play)
Installation	Plug & Play, no driver required
Maintenance	Clean with a soft, dry cloth
Safety	Do not open, avoid moisture and high temperatures

Frequently Asked Questions - 304576 Aplic

How to install the Aplic 304576 webcam?

Simply plug the USB cable into a free port on your computer. The webcam is automatically recognized (Plug & Play). Attach it with the clip to your monitor or screw it onto a tripod.

How to clean the webcam?

Use a soft, dry cloth to gently wipe the lens and housing. Do not use chemical or abrasive cleaners. Avoid any contact with water.

Is the webcam compatible with macOS?

Yes, the Aplic 304576 webcam works in Plug & Play mode on Windows, macOS, and Chrome OS. No additional drivers are needed.

What to do if the webcam is not recognized?

Check that the USB cable is properly connected and try another USB port. Restart the computer. If the problem persists, test the webcam on another device to rule out a hardware defect.

How to use the privacy shutter?

The shutter is located in front of the lens. Simply slide it to cover the lens when you do not want to be filmed. This physically blocks the image.

Does the built-in microphone work with all applications?

Yes, the stereo microphone is recognized as a default audio device. Make sure it is selected in the audio settings of your application (Zoom, Teams, etc.).

How to mount the webcam on a tripod?

Under the base, there is a standard thread (1/4 inch). Screw the webcam directly onto the tripod. Ensure the mount is stable.

Is the viewing angle adjustable?

The viewing angle is approximately 70 degrees (fixed). You can tilt the webcam manually using the ball joint of the clip or tripod.

What to do in case of damage or malfunction?

Do not attempt to open or repair the device yourself, as this would void the warranty. Contact customer service or the retailer. The warranty covers only manufacturing defects.

How to dispose of the webcam at end of life?

Do not dispose of the device with household waste. According to the WEEE directive, take it to a collection point for electronic devices or to the store where you purchased it.

USER MANUAL 304576 Aplic

Blue abstract logo shape resembling a stylized letter 'Q' or partial circle (no text or symbols)

aplic

WEBCAM

Diagram showing two mechanical or robotic arm configurations with rotational arrows indicating motion (no text or symbols)

Thank you for choosing an aplic product. Please read the following user manual carefully so as to get the most from the product you have purchased.

1. Scope of delivery

• Webcam
• User manual

2. Technical data

Port USB
Resolution maximum 1080p@30fps
Features • built-in stereo microphones	• Auto focus• "Privacy shutter"• Power indicator (blue LED)

3. Product details

Power indicator LED Lens

4. Initial use

Take the device out of the package and remove all the packaging material. Place the camera at the desired location. You have the option of fixing the camera to your monitor. Open the webcam clip (stand) and follow the method shown in the figure to fix the webcam to the top of the monitor. Make sure that the clip (stand) is firmly attached and that camera cannot fall down.

Diagram showing two mechanical or robotic arm configurations with rotational arrows indicating motion (no text or symbols)

Optionally, a thread is provided at the bottom of the stand using which the camera can be fixed to a tripod.

Connect the USB connection cable to a free USB port of your computer. The device is automatically installed via Plug&Play and is then ready for use.

5. Safety instructions and disclaimer

Never try to open the device to repair or make modifications. Avoid contact with the mains voltage. Do not short-circuit the product. The device is not waterproof, hence please use it only in dry surroundings. Protect it from high humidity, water and snow.

Keep the device away from high temperatures. Do not expose the device to sudden changes in temperature or strong vibrations, as this could damage the electronic

components. Check the device for any damage before using it. The device should not be used if it was subject to impact or has been damaged in some other manner. Please comply with the local regulations and restrictions. Do not use the device for purposes other than those described in the user manual. This product is not a toy. Keep it out of the reach of children or mentally disabled persons. Any repair or modification to the device, which is not carried out by the original supplier, will void any warranty and guarantee claims. The device should only be used by those who have read and understood this user manual. The specifications of the device may be changed without any special prior notification.

6. Disposal instructions

In line with the European WEEE directive, electrical and electronic devices should not be disposed of along with domestic waste. Their components have to be sent separately for recycling or disposal, as improper disposal of toxic and dangerous components may permanently damage the environment. According to the electrical and electronic equipment act (ElektroG), you are obliged (as a consumer) to return (free of charge) electrical and electronic devices to the manufacturer, the point of sale or public collection points at the end of their service life. The relevant local laws regulate the details in this regard. The symbol displayed on the product, in the user manual or/and on the packaging refers to these regulations. With this manner of sorting, recycling and disposal of used devices, you make an important contribution towards protecting our environment.

WEEE directive 2012/19/EU WEEE Register no.: DE 67896761

The company WD Plus GmbH hereby certifies that the device 304576/20200515SZ276 complies with the fundamental requirements and all other relevant stipulations. A complete conformity statement can be obtained from: WD Plus GmbH, Wohlenbergstraße 16, 30179 Hannover

Diagram showing two mechanical or robotic arm configurations with rotational arrows indicating motion (no text or symbols)

Diagram showing two mechanical or robotic arm configurations with rotational arrows indicating motion (no text or symbols)

Diagram showing two mechanical or robotic arm configurations with rotational arrows indicating motion (no text or symbols)