304399 - Battery charger Aplic - Free user manual and instructions

USER MANUAL 304399 Aplic

Blue abstract logo shape resembling a stylized letter 'Q' or droplet (no text or symbols)

aplic

Power Supply DC 5.0V / 2.0A with DC Connector 5.5mm x 2.5mm

Important safety instructions for this device

• The disregard of safety regulations may cause to an electric shock, fire, serious accidents and eventually fatal injuries. Not observing the alert can also result in death.
• Before installation and maintenance work on the unit, please switch off the power supply and secure it against being switched on again!
• The device is neither waterproof nor it is protected against splash water. Do not use it outdoors or in fields of applications with high humidity.

• The given data on the type plate must be always kept.

• The given data on the type plate must be always kept.

• Never open the device! Inside the device may be connected to potentially lethal voltages!
• In the case of improper use or unauthorized interference our warranty ceases and any warranty claims are excluded.

Thank you for having chosen this aplic product and for placing your trust in our company. Please read this manual carefully before installation to ensure your long-term enjoyment of this product. For future reference, please keep this manual.

1. Scope of delivery

• Power supply DC 5.0V / 2.0A with DC connector 5.5mm x 2.5mm
- User manual

2. Technical data

Input 100-240V AC, 0.5A Max, 50/60Hz
Output DC 5V, max. 2A (2000mA)
Weight approx. 85g
DC connector 5.5mm	(outside/minus pole) / 2.5mm (inside/plus pole)

3. Staring up

Remove the product carefully from the original packaging. Plug the power supply into a properly 230V AC wall socket and connect your desired device with the help of the DC connector. Be sure that the voltage on the nameplate matches with the voltage of the power supply. The maximum permitted electric current must not be exceeded.

Attention! Please do always consider that the inner contact of the DC connector is positive (+) and the outer contact is negative (-).

4. Cleaning

Disconnect the power supply from the mains and the electrical consumer. Clean the housing of the device with a soft dry cloth. Do not use any aggressive or abrasive cleaning agent or solvent. By the way, do not immerse the unit in water and do not use water for cleaning. The device is neither waterproof nor it is protected against splash water.

5. Safety instructions and disclaimer

Do not attempt to service this product by yourself as opening or removing covers may result in fire, electric shock or equipment damage. Please avoid any contact to the electric current. This product is only licensed for indoor use and dry areas. Please protect it from water, rain, snow or high humidity and keep it away from high temperatures and direct sunlight. Do not expose this product to extreme and sudden changes of temperature or heavy vibrations; this may lead to damage of the internal electronic part of this unit. Check this product for signs of damage before putting it in operation. In case the device received any damage, it should not be used. Please contact our customer support. Please observe the relevant national provisions and legal restrictions. Do not use this product for anything other than intended and as described in the manual. Any attempt of repairs or alterations by someone other than the original supplier will invalidate the guarantee and result in refusal of warranty claims. Persons who are familiar with the operating manual and the applicable regulations concerning working safety and accident prevention may only use the network card. This unit is not intended to be used by persons (including children) with limited physical, sensory or mental aptitude or lack of experience and/or knowledge unless they are supervised by a person responsible for their safety or have received instructions as to how the device is used properly. The technical specifications of this product may change without prior notice.

6. Disposal Instructions

The European Directive (WEEE) requires that old electrical and electronic appliances shall be disposed of separately from normal household garbage for optimal recycling. The component parts must be separated, collected and sent for recycling or disposal in an environment-friendly manner. Otherwise, toxic and dangerous substances could cause enduring damage to the environment if disposed of incorrectly. As a consumer you are legally obligated (Electrical and Electronic Equipment Act-ElektroG) to return electronic equipment at the end of its lifetime to their manufacturer, point of sale, public collection points or importer free of charge. The relevant local laws apply here. The symbol on the product, in the instructions or on its packing indicates these regulations. The reuse or recycling of materials and old units makes an important contribution towards protecting the environment.

WEEE guideline: 2012/19/EU

WEEE register number: DE 67896761

WD Plus GmbH, herewith declares that this product 304399/20200407DG016 conforms to the principle requirements and other relevant stipulations. The complete Declaration of Conformity can be obtained from: WD Plus GmbH, Wohlenbergstraße 16, 30179 Hanover