302552 - FM Transmitter Aplic - Free user manual and instructions

Brand	Aplic
Model	302552
Product type	FM transmitter for car
Input voltage	5 V DC
Built-in battery	Lithium-ion, 3.7 V, 70 mAh
Frequency band	87.6 – 107.9 MHz
Transmission power	-46.52 dBm to -47.25 dBm
Connectivity	3.5 mm jack socket, micro USB port (charging)
On/Off switch	Yes, on the top surface
Display	Backlit screen
Main functions	Audio transmission from smartphone/MP3 to car radio, built-in battery, frequency adjustment, USB charging
Package contents	FM transmitter, USB charging cable, user manual
Care and cleaning	Clean with a soft dry cloth. Do not use chemical products.
Safety instructions	Do not open, do not expose to moisture or high temperatures, keep out of reach of children.
Recycling	Do not dispose of with household waste. Follow the WEEE directive 2012/19/EU.
Compliance	Directive 2014/53/EU, declaration of conformity available from WD Plus GmbH
Warranty	Any unauthorized modification or repair voids the warranty.

Frequently Asked Questions - 302552 Aplic

How to turn on the Aplic 302552 FM transmitter?

Slide the ON/OFF switch on the top surface to the 'ON' position. The backlit screen will turn on.

How to adjust the transmission frequency?

Use the 'Next' and 'Previous' buttons on the top surface to increase or decrease the frequency. Make sure the transmitter is on.

Why can't I hear sound on my radio?

Check that the transmitter and radio are tuned to the same frequency. Make sure the volume of your smartphone and radio is high enough. Also check that the jack cable is properly connected.

How to charge the FM transmitter?

Connect the supplied micro USB cable to the charging port of the transmitter and to a USB source (power adapter, computer, etc.). The internal battery will recharge.

What is the battery life?

The built-in 70 mAh battery offers a battery life of about 2 to 3 hours depending on usage. It recharges in about 1 hour.

Can I use the transmitter with an MP3 player?

Yes, simply connect your MP3 player (or any device with a 3.5 mm jack output) to the transmitter via the audio cable.

What to do if the transmitter does not turn on?

Check that the battery is charged. Connect the charging cable and wait a few minutes. If the problem persists, contact customer service.

How to get better sound quality?

Set the volume of your smartphone or MP3 player to a medium level, then adjust the radio volume. Avoid interference by choosing a free frequency.

Can I use the transmitter outdoors?

No, the device is designed for indoor dry use. Avoid moisture, water, and snow.

How to recycle the transmitter at end of life?

Do not dispose of the device with household waste. Drop it off at a WEEE collection point or return it to the store. The battery must be removed and recycled separately.

USER MANUAL 302552 Aplic

Thank you for choosing an aplic product. Please read the following user manual carefully to have an enjoyable experience with your purchased product.

1 Scope of supply

FM Transmitter
- USB charging cable
- User manual

2 Technical data

Input voltage 5V DC
Battery capacity 3,7V, 70mAh
Connection 3.5mm socket
Transmitted frequency range / transmission performance 87	6-107.9 MHz / -46.52dBm to -47.25dBM
Features • In-built battery	• On/Off switch • Backlit display

3 Functions

The FM Transmitter with in-built battery allows you to transfer music from your Smartphone or MP3 player to the radio. You can use the microUSB charging cable to charge the FM transmitter.

4 Commissioning

Take the device out of the package and remove all the packaging material. You can switch on the FM transmitter by pushing the ON/OFF switch on the upper side in the "ON" position. Set the same frequency on your radio and on the FM transmitter. Connect the FM transmitter with the 3.5mm socket to your terminal device such as the Smartphone or MP3 player. Then, you can hear the music you play on your radio. You can increase or reduce the frequency of the FM transmitter using the "Front" and "Back" keys on the upper side of the device. Please ensure that the

FM transmitter is switched on so that the frequency can be increased or reduced. To maintain a balanced sound quality, it is recommended to set the volume of your Smartphone or MP3 player to medium level, and then select the desired volume on your radio.

Note: Make sure to turn the volume of your terminal device (e.g. Smartphone or MP3 player) and the volume of the FM radio to a low level before you start using the FM transmitter.

Please note!

5 Safety instructions and liability disclaimer

Never try to open the device to carry out repairs or conversions. Avoid contact with mains voltages. Do not short-circuit the product. The device is not certified for use in the open air; only use it in dry conditions. Protect it from high humidity, water and snow. Keep it away from high temperatures. Do not subject the device to sudden changes in temperature or heavy vibration as this might damage electronic components. Examine the device for damage before using it. The unit should not be used if it has received an impact or has been damaged in any other way. Please observe national regulations and restrictions. Do not use the device for purposes other than those described in the instructions. This product is not a toy. Keep it out of the reach of children or mentally impaired persons. Any repair or alteration to the device not carried out by the original supplier, will invalidate the warranty or guarantee. The product may only be used by persons who have read and understood these instructions. The device specifications may change without any separate prior notice to this effect.

6 Disposal instructions

Electrical and electronic devices may only be disposed of in accordance with the European WEEE Directive and not with household rubbish. Components must be disposed of or recycled separately as dangerous, toxic elements can inflict sustained damage on the environment if they are disposed of incorrectly. As a consumer, you are bound by the Electrical and Electronic Devices Act (ElektroG) to return electrical and electronic goods free of charge at the end of their useful life

to the manufacturer, the place of purchase or to specially set up, public collection points. The details in each case are governed by national law. The symbol on the product, the operating instructions and/or the packaging refers to these regulations. By separating materials in this way, recycling and disposing of old devices, you are making an important contribution towards protecting our environmen

7 Instructions on the disposal of batteries

With regard to the sale of batteries or the supply of devices containing batteries, the supplier is obliged to draw the customer's attention to the following:

As the end user, the customer has a statutory obligation to return used batteries. He can return old batteries stocked or previously stocked by the supplier in the form of new batteries to the supplier's despatch warehouse (despatch address) free of charge. The symbols shown on the batteries have the following meanings: Pb = battery contains more than 0.004 percent by mass of lead, Cd = battery contains more than 0.002 percent by mass of cadmium, Hg = battery contains more than 0.0005 percent by mass of quicksilver.

The symbol of the rubbish bin with a cross through it indicates that the battery may not be put in household waste.

WEEE guideline: 2012/19/EU
WEEE register number: DE 94495668

WD Plus GmbH, herewith declares that this product 302552/20160920SZ083 conforms to the principle requirements and other relevant stipulations of Directive 2014/53/EU. The complete Declaration of Conformity can be obtained from: WD Plus GmbH, Wohlenbergstraße 16, 30719 Hanover