LRG-CMT721 - Microphone Lorgar - Free user manual and instructions

Product Type	USB Condenser Microphone
Frequency Response	50 Hz - 18 kHz
Sensitivity	-40 dB ± 3 dB
Signal-to-Noise Ratio	70 dB (A-weighted)
Recording Format	48 kHz / 16 bits
Current	75 ± 5 mA
Diaphragm	Nickel-plated
Polar Pattern	Cardioid
Volume Button	Rotary knob (increase clockwise, decrease counterclockwise)
Mute Button	With LED indicator (green = active, red = muted)
Rotation	360° horizontal
Tilt	180° vertical
Headphone Jack	3.5 mm jack for monitoring
Dimensions	49 x 154.6 x 56.1 mm
Power Supply	Via USB port
Compatibility	Mac, Windows, Android, PlayStation
Supported Software	Discord, OBS, FL Studio, Skype, etc.
Included Accessories	Shock mount, 3/8\" to 5/8\" scissor arm adapter, pop filter, tripod
Cleaning Method	Dry cloth only
Safety	Do not disassemble, avoid moisture and heat
Warranty	2 years

Frequently Asked Questions - LRG-CMT721 Lorgar

How to connect the Lorgar LRG-CMT721 microphone?

The microphone is Plug and Play. Connect the USB cable to a USB port on your computer. The computer will automatically recognize the device and install the necessary driver.

What to do if the computer does not detect the microphone?

Restart the computer and try connecting the microphone to another USB port. Also make sure the cable is properly connected.

How to adjust the microphone volume?

Use the volume knob located on the microphone. Turn it clockwise to increase the volume, and counterclockwise to decrease it. It is recommended to lower the volume before plugging in the microphone.

What does the microphone's LED indicator mean?

The indicator is green when the microphone is powered and active. It turns red when the mute function is activated via the mute button.

How to install the microphone on the tripod?

1. Unfold the tripod. 2. Tighten the height screw. 3. Screw the 3/8" to 5/8" adapter onto the tripod. 4. Screw the shock mount onto the adapter. 5. Place the microphone on the mount and tighten the metal nut at the bottom. 6. Attach the pop filter if desired.

Is the microphone compatible with Windows 10?

Yes, it is compatible. If no sound is captured after a Windows 10 update, go to Settings > Privacy > Microphone and enable the option 'Allow apps to access your microphone'.

What software can I use with this microphone?

The microphone is compatible with many communication and recording software such as Discord, OBS, FL Studio, Skype, and other applications using a USB audio input.

How to clean the Lorgar LRG-CMT721 microphone?

Use a dry cloth to clean the device. Do not use liquid or abrasive products. Avoid exposing it to moisture or excessive dust.

What is the warranty period?

The warranty is 2 years from the date of purchase by the consumer. For more information, visit https://lorgar.eu/warranty-terms/

What is the polar pattern of the microphone?

The microphone has a cardioid pattern, which means it primarily picks up sounds from the front and reduces side and rear noise. It is ideal for vocal recording and streaming.

USER MANUAL LRG-CMT721 Lorgar

Thank you for choosing our products.

www.lorgar.eu

Stylized pink circular logo with stylized eyes and a ring (no text or symbols)

FEATURES:

• Frequency Response: 50Hz—18kHz
- Sensitivity: -40dB±3dB
• S/N Ratio: 70dB (A-weighted)
• Recording format: 48KHz / 16 bit
• Electrical Current: 75±5mA
• Nickel-plated diaphragm
- Plug and Play system
- Cardioid polar pattern
• Volume knob
- Mute button with LED indicator
- 360^ Rotation & 180^ Tilt
• 3,5 mm headphone jack
- Dimensions: 49 × 154.6 × 56.1 ~mm .
- Compatible with Mac, Windows, Android and PlayStation
• Supports Discord, OBS, FL Studio, Skype etc

Studio setup with a black studio microphone and circular head cover mounted on a tripod stand (no text or symbols visible)

PACKAGE CONTENT

Black cylindrical electronic device with control buttons and a small display (no visible text or symbols)

Coiled black cable with two connectors (no text or symbols visible)

Black tripod-mounted mechanical device with a mounted sensor or actuator (no visible text or symbols)

Simple black circular object with a vertical line extending from its base, labeled 'Po' on the right side (no other text or symbols)

Microphone USB type C cable, 2 m Tripod Stand

Pop filter

Black studio microphone with adjustable head and clasp (no text or symbols visible)

Shock Mount

3/8" to 5/8" universal pantograph adapter

Tripod mount ring

INTRODUCTION

This device is operating on the principle "Plug and Play". Please connect or insert necessary device with correct port.

Please turn the volume down when plugging the microphone into the USB port, and gradually increase the volume to an ideal level.

Volume up:

Clockwise (Turn right)

Volume down:

Counter-clockwise (Turn left)

The indicator will be green after plugging to the computer.

Hand pointing at a black L3008 brand hairdryer device with control knob (no visible text or symbols)

Press the mute button to turn the mute option on. The indicator will turn red.

Side profile of a person's face with a circular icon and a black device, no visible text or symbols

Make sure the front of the microphone points towards your mouth.

Screw the mount to adjust the shock mount angle 180^ vertically and screw the metal ring to adjust the microphone angle 360^ horizontally.

Studio setup with a black studio microphone and headphones, next to a computer monitor displaying data (no visible text or symbols)

Lorgar Voicer 721 includes a standard 1/8" (3.5mm) headphone jack for monitoring and playback

TRIPOD MOUNTING MANUAL

① Unfold the folded tripod.
② Fasten the screw.
③ Adjust to a suitable height, and then tighten screw.
④ Screw the 3/8" to 5/8" adapter on top of tripod stand.
⑤ Screw shock mount on top of adapter.
⑥ Loosen the screw and adjust the angle, then fasten the screw.
⑦ Put the mic on the shock mount
⑧ Screw the metal nut to the bottom of mic to fix the mic on the shock mount.
⑨ Screw the pop filter screw to fix to the tripod stand, then tighten the screw. Adjust the pop filter position.

PLUG & PLAY

Plug the USB cable into the USB port of your computer. Your computer will automatically recognize the USB device and install a driver. The driver will be installed automatically. If the microphone is not picking up sound, please follow the instructions below:

Problem Solution
A computer couldn't identify the USB devices	Please restart a computer and connect the microphone to another USB port.
The microphone is detected but no output of the sound	Make sure that System Sound isn't mute and you haven't set a microphone volume to minimum.
The microphone is detected but no output of the sound after updating Windows 10	To let apps access the microphone, please select Settings>Privacy>Microphone, then turn on Allow apps to access your microphone.

SAFETY INSTRUCTIONS

Read carefully and follow all instructions before using this product.

1. Do not expose the device to excessive moisture, water or dust. Do not install in rooms with high humidity and dust level.

2. Do not expose the device to heat: do not place it close to heating appliances, and do not expose it to direct sun rays.

3. Clean the device with dry cloth only.

WARNING

It is forbidden to dismantle the device. Attempt to repair this device is not recommended and leads to warranty waste.

WARRANTY

The warranty period starts from the day of the product purchase from Lorgar authorized Seller. The date of purchase is the date specified on your sales receipt or on the waybill. During the warranty period, repair, replacement or refund for the purchase shall be performed at the discretion of Lorgar. In order to obtain warranty service, the goods must be returned to the Seller at the place of purchase together with proof of purchase (receipt or bill of lading). 2 years warranty from the date of purchase by the consumer. The service life is 2 years. Additional information about the use and warranty is available at https://lorgar.eu/warranty-terms/

Manufacturer: Asbisc Enterprises PLC, 43, Kolonakiou Street, Diamond Court 4103 Ayios Athanasios

KARAKTERISTIKE:

• Frekvencija: 50Hz–18kHz
- Osjetljivost: -40dB±3dB
- Omjer S/N: 70dB (A-ponderisano)
- Format snimanja: 48KHz / 16 bit
- Struja: 75 ± 5 ~mA
• Niklovana membrana
- Plug and Play sistem
• Kardiodni Polarni uzorak
• Dugme za jačinu zvuka
- Isključivanje zvuka sa LED indikatorom
- Rotacija 360° & Nagib 180°
- Priključak za slušalice 3,5 mm
- Dimenzije: 49 x154.6 x 56.1 mm
- Kompaktibilan sa Mac, Windows, Android i PlayStation
- Podržava Discord, OBS, FL Studio, Skype itd

Studio setup with a black studio microphone and circular screen mounted on a tripod stand (no text or symbols visible)

SADRŽAJ PAKOVANJA

Black cylindrical electronic device with control buttons and a small indicator light (no visible text or symbols)

Coiled black cable with two connectors (no text or symbols visible)

Black tripod-mounted mechanical device with a mounted sensor or actuator (no visible text or symbols)

Simple black circular object with a vertical stem and small protrusions at the bottom (no text or symbols)

Pop filter

Mikrofon USB kabal tip C, 2 m Stativ

Black studio microphone with adjustable head and clasp (no text or symbols visible)

Nosač za amortizaciju od udaraca

3/8" to 5/8" univerzalni adapter za pantograf

Prsten za postavljanje na stativ

UVOD

Hand pointing at a black LACOM brand brush (no visible text or symbols)

Side profile of a woman's face with a camera lens and circular graphic overlay (no text or symbols)

Studio setup with a microphone and headphones, next to a computer monitor displaying data (no visible text or symbols)

Lorgar Voicer-721, priključak za slušalice uključuje standard 1/8" (3.5mm) za nadzor i reprodukciju.

UPUTSTVO ZA MONTAŽU STATIVA

① Rasklopite sklopljeni stativ.
② Pričvrstite vijak.
③ Podesite na odgovarajuću visinu, zatim pritegnite vijak.
④ Pričvrstite adapter 3/8" do 5/8" na vrh stativa.
⑤ Zavrnite amortizer na vrh adaptera.
⑥ Odvrnite vijak i podesite ugao, zatim pričvrstite vijak.
⑦ Stavite mikrofon na amortizer.
⑧ Pričvrstite metalnu maticu na dno mikrofona, kako bi pričvrstili mikrofon na držač.
⑨ Zavrnuti šaraf filtera za zaštitu od buke kako bi se fiksirao na stativ, zatim stegnuti šaraf. Korigovati poziciju filtera za zaštitu buke po potrebi.

PLUG & PLAY

Studio setup with a black studio microphone and circular head cover mounted on a tripod stand (no visible text or symbols)

СЪДЪРЖАНИЕ НА ПАКЕТА

Black cylindrical device with control buttons and a small circular icon on the side (no visible text or symbols)

Coiled black cable with two connectors (no text or symbols visible)

Black tripod-mounted camera or bipod with a mounted sensor (no visible text or symbols)

Simple black circular object with a vertical line and a small bracket at the bottom, labeled 'Pop' (no other text or symbols)

Микрофон USB type C кабел, 2 m Триножник

Pop filter

Black studio microphone with adjustable head and clasp (no text or symbols visible)

Hand pointing at a black LIXOME brand brush (no visible text or symbols on device)

Side profile of a person's face with a circular icon and a black device, no visible text or symbols

Studio setup with a microphone and headphones, next to a computer monitor displaying data (no visible text or symbols)

Lorgar Voicer-721 включа стандартен 1/8"(3.5mm) жак за слушалки, за мониторинг и плейбек

PLUG & PLAY

Studio setup with a black studio microphone and circular screen mounted on a tripod stand (no text or symbols visible)

OBSAH BALENÍ

Black cylindrical device with control buttons and a small dial (no visible text or symbols)

Coiled black cable with two connectors (no text or symbols visible)

Black tripod-mounted mechanical device with a mounted sensor or actuator (no visible text or symbols)

Simple black balloon-like object with a vertical line and small protrusions at the bottom (no text or symbols)

Close-up of a black studio microphone with adjustable head and neck (no text or symbols visible)

Hand pointing at a black industrial machine labeled 'LPGM' with control panel (no visible text beyond branding)

Side profile of a person's face with a circular icon and earbell symbol, next to a black device (no text or symbols present)

Studio setup with a microphone and headphones, next to a computer monitor (no visible text or symbols)

MANUÁL MONTÁŽE STATIVU

PLUG & PLAY

https://lorgar.eu/warranty-terms/

Výrobce: Asbisc Enterprises PLC, 43, Kolonakiou Street, Diamond Soud 4103 Ayios Athanasios

PRODUKTMERKMALE:

Studio setup with a black studio microphone and circular head cover mounted on a tripod stand (no visible text or symbols)

PAKETINHALT

Black cylindrical device with control knob and buttons (no visible text or symbols)

Coiled black cable with two connectors (no text or symbols visible)

Black tripod-mounted mechanical device with a mounted sensor or actuator (no visible text or symbols)

Simple black circular object with a vertical line and a small protrusion at the bottom (no text or symbols)

Pop filter

Black studio microphone with adjustable head and clasp (no text or symbols visible)

Schock-Mount

Hand pointing at a black L2008 brand washing machine (no visible text or symbols)

Side profile of a woman's face with a circular icon and a black device, no visible text or symbols

Studio setup with a desktop microphone and headphones, no visible text or symbols

PLUG & PLAY

Studio setup with a black studio microphone and circular screen mounted on a tripod stand (no text or symbols visible)

PAKENDI SISALDUS

Black cylindrical electronic device with control buttons and a small dial (no visible text or symbols)

Coiled black cable with two connectors (no text or symbols visible)

Black tripod-mounted mechanical device with a mounted sensor or actuator (no visible text or symbols)

Simple black-and-white diagram of a balloon-like object with a vertical line and a small protrusion at the bottom (no text or symbols)

Black studio microphone with adjustable head and clasp (no text or symbols visible)

Shock Mount

3/8" kuni 5/8" universaalne pantograafi adapter

Hand pointing at a black L3008 brand water heater with control knob (no visible text or symbols)

Side profile of a person's face with a circular icon and a black device, no visible text or symbols

Studio setup with a desktop microphone and headphones, no visible text or symbols

PLUG & PLAY

Studio setup with a black studio microphone and circular screen mounted on a tripod stand (no visible text or symbols)

Black studio microphone with control panel and speaker grille (no visible text or symbols)

Coiled black cable with two connectors (no text or symbols visible)

Black tripod-mounted mechanical device with a mounted sensor or actuator (no visible text or symbols)

Simple black balloon-like object with a vertical line and small protrusions at the bottom (no text or symbols)

Black studio microphone with adjustable head and clasp (no text or symbols visible)

Hand pointing at a black L300ml water heater with control knob (no text or symbols visible)

Side profile of a woman's face with a device emitting sound waves (no text or symbols visible)

Studio setup with a microphone and headphones on the left, alongside a computer monitor displaying data (no visible text or symbols)

PLUG & PLAY

Studio setup with a black studio microphone and circular screen mounted on a tripod stand (no text or symbols visible)

CONTENU DE L'EMBALLAGE

Black studio microphone with control buttons (no visible text or symbols)

Coiled black cable with USB port connector (no text or symbols visible)

Black tripod-mounted camera or bipod with a mounted sensor (no visible text or symbols)

Simple black-and-white diagram of a vertical pole with a circular top and a small labeled component (no text or symbols on the pole itself)

Microphone Câble USB type C, 2 m Trépied

Pop filter

Black studio microphone with adjustable head and clasp (no text or symbols visible)

Hand pointing at a black L300ml water heater with control knob (no text or symbols visible)

Side profile of a person's face with a circular icon and a device, no visible text or symbols

Studio setup with a desktop computer monitor displaying audio waveform and headphones icon (no visible text or symbols)

INSTALLATION PLUG & PLAY

Fabricant: Asbisc Enterprises PLC, 43, Kolonakiou Street, Diamond Court 4103 Ayios Athanasios

TERMÉKJELLEMZÖK:

Studio setup with a black studio microphone and circular screen mounted on a tripod stand (no text or symbols visible)

A CSOMAG TARTALMA

Black studio microphone with control knob (no visible text or symbols)

Coiled black cable with two connectors (no text or symbols visible)

Black tripod-mounted bipod with a mounted sensor or camera (no visible text or symbols)

Simple black circular object with a vertical line extending from its top, labeled 'Po' on the right side (no other text or symbols)

Pop filter

Mikrofon USB type C kábel, 2 m Tripod

Black studio microphone with adjustable head and mounting bracket (no text or symbols visible)

Rezgéscsillapító

Hand pointing at a black LXXX brand brush (no visible text or symbols on device)

Side profile of a person's face with a circular icon and a black device, no visible text or symbols

Studio setup with a desktop microphone and headphones, no visible text or symbols

PLUG & PLAY

https://lorgar.eu/warranty-terms/

Gyártó: Asbisc Enterprises PLC, 43, Kolonakiou Street, Diamond Court 4103 Ayios Athanasios

FUNKCIJOS:

Studio setup with a black studio microphone and circular head-mounted screen mounted on a tripod stand (no text or symbols visible)

PAKUOTÈS TURINYS

Black studio microphone with control buttons and lens (no visible text or symbols)

Coiled black cable with two connectors (no text or symbols visible)

Black tripod-mounted mechanical device with a mounted sensor or actuator (no visible text or symbols)

Simple black circular object with a vertical line extending from its top, labeled 'Po' on the right side (no other text or symbols)

Pop filter

Mikrofonas C tipo USB kabelis, 2 m Trikojis stovas

Black studio microphone with adjustable head and clasp (no text or symbols visible)

Smūgio laikiklis

3/8" - 5/8" universalus pantografo adapteris

Hand pointing at a black L300ml water heater with control knob (no text or symbols visible)

Side profile of a woman's face with a digital ear icon and microphone, no visible text or symbols

Studio setup with a microphone and headphones, next to a computer monitor displaying data (no visible text or symbols)

IJUNKITE IR NAUDOKITE

Studio setup with a black studio microphone and circular head cover mounted on a tripod stand (no text or symbols visible)

IEPAKOJUMA SATURS

Black studio microphone with control knob and brand logo (no visible text or symbols)

Coiled black cable with two connectors (no text or symbols visible)

Black tripod-mounted camera or tripod device with no visible text or symbols

Simple black circular object with a vertical line extending from its top, labeled 'Po' on the right side (no other text or symbols)

Black-and-white photo of a studio microphone (no text or symbols visible)

Hand pointing at a black LACOM brand brush (no visible text or symbols)

Side profile of a person's face with a circular icon and a black device, no visible text or symbols

Studio setup with a microphone and headphones on the left, alongside a computer monitor displaying data (no visible text or symbols)

PLUG & PLAY

Studio setup with a black studio microphone and circular screen mounted on a tripod stand (no text or symbols visible)

CONTINUTUL PACHETULUI

Black studio microphone with control knob and speaker grille (no visible text or symbols)

Coiled black cable with two connectors (no text or symbols visible)

Black tripod-mounted device with a mounted sensor or camera (no visible text or symbols)

Simple black balloon-like object with a vertical line and small protrusions at the bottom (no text or symbols)

trepied
Pop filter

Black studio microphone with adjustable head and clasp (no text or symbols visible)

Muntele de şoc

Adaptor pantograf universal 3/8 "până la 5/8"

Inel de montare trepied

INTRODUCERE

Hand pointing at a black Xiaomi brand brush (no visible text or symbols)

Side profile of a person's face with a circular icon and a device, no visible text or symbols

Close-up of a desktop microphone next to a laptop displaying audio waveform (no visible text or symbols)

PLUG & PLAY

Producator: Asbisc Enterprises PLC, 43, Kolonakiou Street, Diamond Court 4103 Ayios Athanasios

KARAKTERISTIKE:

• Frekvencijski odziv: 50Hz - 18kHz
- Osetljivost: -40dB ± 3dB
• S/N odnos: 70dB (A-ponderisano)
- Format snimanja: 48KHz / 16 bita
• Električna struja: 75 ± 5mA
• Niklovana membrana
- Plug and Play sistem
• Kardioidni polarni obrazac
• Dugme za jačinu zvuka
- Dugme za isključivanje zvuka sa LED indikatorom
• Rotacija 360° i nagib 180°
- Priključak za slušalice od 3,5 mm
- Dimenzije: 49 × 154,6 × 56,1 ~mm .
- Kompatibilan sa Mac, Windovs, Android i PlayStation konzolom
- Podržava Discord, OBS, FL Studio, Swipe itd

Studio setup with a black studio microphone and a circular head-mounted dish mounted on a tripod stand (no visible text or symbols)

ПАЦКАГЕ ЦОНТЕНТ

Black studio microphone with control panel and brand logo (no visible text or symbols)

Coiled black cable with two connectors (no text or symbols visible)

Black tripod-mounted camera or tripod device with a mounted sensor (no visible text or symbols)

Simple black circular object with a vertical line and small protrusions at the bottom (no text or symbols)

Mikrofon USB tip C kabl, 2 m Postolje za

stativ

Pop filter

Close-up of a black studio microphone with adjustable head and clasp (no text or symbols visible)

Shock Mount

Univerzalni adapter za pantograf od 3/8 "do 5/8"

Hand pointing at a black L3GMS brand brush (no text or symbols visible)

Side profile of a woman's face with a camera lens and earbell icon, no text or symbols present

Obavezno usmerite prednji deo mikrofona prema ustima.

Zavrnite nosač da biste podesili ugao nosača udarca za 180° vertikalno, a metalni prsten zavrtite za ugao mikrofona za 360° vodoravno.

Studio setup with a desktop microphone and headphones, no visible text or symbols

Lorgar Voicer-721 uključuje standard 1/8" (3,5 mm) priključak za slušalice za nadgledanje i reprodukciju

UPUTSTVO ZA MONTAŽU STATIVA

① Rasklopite stativ
② Pričvrstite zavrtanj.
③ Podesite na odgovarajuću visinu, a zatim pritegnite zavrtanj.
④ Pričvrstite adapter od 3/8 "do 5/8" na vrh postolja stativa.
⑤ Zašrafite držač na vrhu adaptera.
⑥ Otpustite zavrtanj i podesite ugao, a zatim pričvrstite zavrtanj.
⑦ Stavite mikrofon na držač (shock mount)
⑧ Zašrafite metalnu maticu na dno mikrofona da biste pričvrstili mikrofon na držač (shock mount)
⑨ Odvrnite zavrtanj pop filtera da biste ga pričvrstili za stativ, zatim zategnite zavrtanj. Podesite položaj pop filtera.

PLUG & PLAY

Priključite USB kabl na USB port računara. Kompjuter će automatski prepoznati USB uređaj i instalirati drajvere. Drajver će biti instaliran automatski. Ukoliko mikrofon ne prima zvuk, sledite uputstva u nastavku:

Problem Rešenje
Računar nije mogao da identifikuje USB uređaje	Ponovo pokrenite računar i povežite mikrofon sa drugim USB portom.
Mikrofon je detektovan ali nema zvuka	Uverite se da sistemski zvuk nije isključen i da niste podesili jačinu zvuka mikrofona na minimum.
Mikrofon je detektovan, ali nema zvuka nakon ažuriranja sistema Windows 10	Da biste aplikacijama omogućili pristup mikrofonu, odaberite Postavke> Privatnost> Mikrofon, a zatim uključite Dozvoli aplikacijama pristup vašem mikrofonu.

BEZBEDONOSNE INSTRUKCIJE

https://lorgar.eu/warranty-terms/

Proizvođač: Asbisc Enterprises PLC, 43, Kolonakiou Street, Diamond Court 4103 Ayios Athanasios

Studio setup featuring a black studio microphone on a tripod stand with a circular screen and cable (no visible text or symbols)

КОМПЛЕКТАЦИЯ

Black studio microphone with control buttons and speaker grille (no visible text or symbols)

Black USB cable with connector icon (no text or symbols visible)

Black tripod-mounted mechanical device with a mounted sensor or actuator (no visible text or symbols)

Simple black balloon-like object with a vertical line and small protrusions, no text or symbols visible.

Поп- фильтр

Микрофон Кабель USB Type-C, 2 м Штатив

Black studio microphone with adjustable head and clasp (no text or symbols visible)

Ударное крепление

Hand pointing at a black industrial machine with control panel (no visible text or symbols)

Side profile of a person's face with a circular icon overlay, next to a black device (no text or symbols visible)

Studio setup with a desktop microphone and a laptop displaying audio recordings (no visible text or symbols)

PLUG & PLAY

Studio setup featuring a black studio microphone on a tripod stand with a circular head cover (no text or symbols visible)

OBSAH BALENIA

Black cylindrical device with control knobs and a dial (no visible text or symbols)

Coiled black cable with two USB connectors (no text or symbols visible)

Black tripod-mounted device with a mounted sensor or camera (no visible text or symbols)

Simple black circular object with a vertical line and a small attached object, labeled 'Po' on the right (no other text or symbols)

Pop filter

Black studio microphone with adjustable head and stand (no text or symbols visible)

Držiak

Univerzálny adaptér z 3/8" na 5/8"

Prstenec na upevnenie na statív

ÚVOD

Hand pointing at a black L200M device with control panel (no visible text or symbols)

Side profile of a woman's face with a device emitting sound waves (no text or symbols visible)

Studio setup with a desktop microphone and headphones, no visible text or symbols

PLUG & PLAY

Studio setup with a black studio microphone and circular head cover mounted on a tripod stand (no visible text or symbols)

КОМПЛЕКТАЦІЯ

Black studio microphone with control knob and buttons (no visible text or symbols)

Coiled black cable with two connectors (no text or symbols visible)

Black tripod-mounted mechanical device with adjustable legs and a small circular component on top (no visible text or symbols)

Simple black-and-white line drawing of a balloon-like object with a vertical stem and small base (no text or symbols)

Black studio microphone with adjustable head and clasp (no text or symbols visible)

Ударне кріплення

Hand pointing at a black LXXX brand brush (no visible text or symbols on device)

Side profile of a person's face with a circular icon and sensor symbol, next to a black device (no text or symbols present)

Studio setup with a microphone and headphones on the left, alongside a computer monitor displaying data (no visible text or symbols)

PLUG & PLAY