302826 - Digital timer switch Bearware - Free user manual and instructions

Product type	Digital time switch
Brand	Bearware
Model	302826
Supply voltage	230 V AC, 50 Hz
Maximum load	16(4) A / 3680 W
Overvoltage	2.5 kV
Protection class	2
Number of time segments	96 (15 minutes each)
Status display	Yes, red (on/off)
Manual switch	Yes (ON / automatic)
Usage	Indoor dry only
Time setting	Rotation of inner ring
Maintenance	Clean with a dry cloth; do not open
Warranty	2 years
Package contents	Mechanical timer, instruction manual

Frequently Asked Questions - 302826 Bearware

How do I set the current time on the timer?

Turn the inner ring clockwise until the red arrow points to the current time. Then plug in the timer.

What should I do if the status display does not light up?

Check that the timer is plugged in and the connected device is on. If the display remains off, the power is cut according to the schedule. Make sure the tabs are pressed down for the desired time slots.

Can I use this device outdoors?

No, the device is intended for indoor dry locations only. Avoid moisture, water, and snow.

How do I activate manual mode?

Use the switch on the right side. Set it to "ON" for continuous power, or toward the clock symbol to return to automatic mode.

What is the maximum supported load?

The maximum load is 16(4) A or 3680 W. Do not exceed these values.

How many time segments are available?

There are 96 segments of 15 minutes each, covering the 24 hours of the day.

How do I clean the timer?

Unplug the device and clean it with a dry cloth. Do not use liquid or abrasive products.

What should I do in case of a thunderstorm?

Unplug the timer from the electrical outlet to avoid damage from lightning.

Is the device under warranty?

Yes, the manufacturer offers a 2-year warranty on manufacturing and material defects. Keep the original invoice.

Can I repair the device myself?

No, never open the device. Any repairs must be carried out by an authorized service. Opening the device voids the warranty.

USER MANUAL 302826 Bearware

Red stylized graphic of a bear and a pig (no text or symbols)

BEARWARE

Thank you for choosing a Bearware product. Please read the following user manual carefully so as to get the most from the product you have purchased.

1. Scope of delivery

• Mechanical timer
• User manual

2. Technical data

Electric voltage 230V AC 50Hz

Maximum load 16(4)A / 3680W

Shock voltage 2.5kV

Operating times continuously

Protection class 2

Features • Status display• manual switch on using a separate switch

3. Commissioning

Take the product out of the package and remove all the packaging material. The timer divides the 24 hours of a day into 96 individual sections of 15 minutes each. Using the 96 blue sliders, which are circularly arranged on the front of the device, you can individually select the time for which electricity needs to flow. The inner ring represents the time of day in hours with the values 1-24 and is fixed to the sliders. Thus, the time indicated on the inner ring is associated with the adjacent slider.

Push one of the sliders into the timer and the current flows for the appropriate time. If a slider is pulled out, then the device which is connected to the timer is switched off for that duration of time.

After adjusting the time ranges as per your needs, it is necessary to set the current time of the day. Rotate the inner ring and the slider in a clockwise direction till the red arrow on the front of the product points to the value of the inner ring, which corresponds to the current time of the day.

Now plug the timer into a properly installed and earthed socket at home and then connect the device, whose power supply should be controlled by the timer.

The timer is now ready for operation. Once the current flow to the connected device is enabled, the red status indicator on the front of the timer starts to glow. If the current flow is blocked, then the indicator stops glowing.

4. Manual switch on

If you want to use the device connected to the timer, outside the setup intervals, then you can use the switch provided on the right side of the timer.

Set the switch to "ON" to ensure uninterrupted power supply to the device. Slide the switch in the direction of the clock icon to enable the timer again.

CAUTION!

5. Important tips

• Only for use in dry rooms.
• Do not connect in series.
• Disconnected only when the plug is removed.

6. Safety instructions and disclaimer

Please do not try to open the device to carry out repairs or modifications by yourself. Avoid contact with the mains supply. The device is free of electrical current only when disconnected. Please do not short-circuit the product. Do not forget to disconnect the power cord when the device is not being used or during thunderstorms. The device is not approved for outdoor use. Therefore, please use it only in dry surroundings. Protect it from high humidity, water and snow. Never expose the device to high outside temperatures. Do not expose the device to sudden changes in temperature or strong vibrations, as this could damage the electronic components. Check the device for any damage before using it. The device should not be used if it has been subject to impact or has been damaged in any other way.

Please follow the national regulations and restrictions. Do not use the device for purposes other than those described in this manual. This product is not a toy.

Keep it out of the reach of children or mentally disabled persons. Any repair or modifications to the device, which is not carried out by the original supplier, will void any warranty and guarantee claims. The device should be used only by persons who have read and understood this user manual. The specifications of the device may be changed without special prior notice. The device should be used only by persons who have read and understood this user manual.

7. Disposal instructions

In line with the European WEEE directive, electrical and electronic devices should not be disposed of along with domestic waste. Their components have to be separately sent for recycling or disposal, because improper disposal of toxic and dangerous components may permanently damage the environment. According to the electrical and electronic equipment act (ElektroG), you are obliged (as a consumer) to return (free of charge) all electrical and electronic devices to the manufacturer, the point of sale, or public collection points at the end of their service life. The relevant local laws regulate the details in this regard. The symbol displayed on the product, in the user manual or/and on the packaging refers to these regulations. With this manner of sorting, recycling and disposal of used devices, you make an important contribution towards protecting our environment.

8. Warranty

The manufacturer provides a warranty of 2 years for this product with regards to workmanship and material. Repairs should only be carried out by an authorized customer service centre. The original sales document should be enclosed as proof.

The following are excluded from warranty: normal wear and tear, modifications, reworks, damage caused by carelessness, external influences, applications for which the product was not designed or products dismantled completely or partially.

WEEE directive 2012/19/EU WEEE Register no.: DE 67896761

The company WD Plus GmbH hereby certifies that the device 302826 complies with the fundamental requirements and all other relevant stipulations. A complete conformity statement can be obtained from: WD Plus GmbH, Wohlenbergstraße 16, 30179 Hannover