301087 - Hard Drive CSL - Free user manual and instructions

Product Type	External Hard Drive Enclosure
External Interface	USB 3.0 (backward compatible)
Internal Interface	Serial ATA (SATA)
Compatible Hard Drive Size	2.5 inches (6.4 cm)
Maximum Hard Drive Height	9.5 mm
Power Supply	Via USB bus (bus-powered)
Supported Operating Systems	Windows XP or later, macOS 10.4.5 or later
Main Features	Convert a 2.5" SATA hard drive into an external USB hard drive; driverless installation
Package Contents	Enclosure, USB 3.0 cable, quick start guide
Care and Cleaning	Clean with a dry, soft cloth. Do not use chemicals or liquids.
Safety	Do not expose to moisture, high temperatures or shocks. Do not open the enclosure.
Spare Parts and Repairability	Replacement USB cable available. No other user-serviceable parts.
General Information	Brand: CSL; Model: 301087; Category: Hard drive (enclosure)

Frequently Asked Questions - 301087 CSL

How to install a hard drive in the enclosure?

Slide the enclosure cover to open it, insert your 2.5-inch SATA hard drive into the internal connector, then close the cover. Make sure the drive is properly aligned.

What types of hard drives are compatible with the CSL 301087 enclosure?

The enclosure accepts 2.5-inch hard drives and SSDs with a SATA interface and a maximum height of 9.5 mm.

How to format the hard drive after installation?

After connecting the enclosure to the computer, open the disk management utility (Windows: Disk Management; macOS: Disk Utility). Locate the new disk, initialize it, then format it with the desired file system (NTFS, exFAT, etc.).

Is the enclosure compatible with Windows 10?

Yes, it is compatible with Windows XP and later versions, including Windows 10 and Windows 11. No additional drivers are required.

Why doesn't my computer detect the hard drive?

First check that the USB cable is properly connected and that the hard drive is fully inserted into the enclosure. Try a different USB port or cable. If the problem persists, test the hard drive directly on an internal SATA port to verify its functionality.

How to connect the enclosure to a computer?

Use the included USB 3.0 cable. Connect the micro-USB end to the enclosure and the USB-A end to a port on your computer. The hard drive should be recognized automatically.

Does the enclosure work with an SSD?

Yes, it works with any 2.5-inch hard drive or SSD with a SATA interface. SSDs benefit from the speed of USB 3.0.

Are there indicator lights on the enclosure?

The CSL 301087 enclosure is typically equipped with an LED indicator that shows operation (blinking during data access). Refer to the manual for details.

Can I use this enclosure with a TV or game console?

Yes, provided the TV or console has a USB port and supports external storage devices. The hard drive must be formatted in a compatible format (exFAT recommended).

How to safely eject the external hard drive?

On Windows, click the 'Safely Remove Hardware' icon in the taskbar and select the drive. On macOS, drag the drive icon to the trash. Wait for the indicator light to stop blinking before disconnecting the cable.

USER MANUAL 301087 CSL

Exterior view of a silver rectangular electronic device with reflective surface (no text or symbols visible)

USB 3.0 Enclosure for 2,5" SATA Hard disks

Thank you for choosing this product from CSL and for placing your trust in our company. Before using the USB 3.0 enclosure for the first time, please read this manual carefully to ensure your long-term enjoyment of this product. For future reference, please keep this manual.

1 Scope of delivery

• Hard-disk enclosure
  • USB 3.0 connecti on cable
• User manual

2 Technical specifi cati ons

External connecti on USB 3.0 (backwards compatible)
Internal connecti on Serial ATA (SATA)
Hard-disk form factor 2,5" / 6,4cm
Tested operati ng systems	Windows XP or higher, MacOS 10.4.5 or higher
Max. installati on height 9,5mm

3 Features

The hard-disk enclosure offers you the opportunity to use a hard-drive as an external drive. For this, please install your serial-ATA hard-drive into the enclosure. After that you can connect it with the computer using the supplied USB cable. A manual driver installation is not required.

4 Getti ng started

Please remove the case from all packing materials. Slide the hard drive enclosure and install a 2.5 "Serial ATA hard disk. Aft erwards you have to close the case and connect the USB 3.0 cable to the designated connection.

5 Safety instructi ons and disclaimer

Do not attempt to service this product by yourself as opening or removing covers may result in fire, electric shock or equipment damage. Please avoid any contact to the electric current. This product is only licensed for indoor use and dry areas. Please protect it from water, rain, snow or high humidity and keep it away from high temperatures and direct sunlight.

Do not expose this product to extreme and sudden changes of temperature or heavy vibrations; this may lead to damage of the internal electronic part of this unit. Check this product for signs of damage before putting it in operation. In case the device received any damage, it should not be used. Please contact our customer support. Please observe the relevant national provisions and legal restrictions. Do not use this product for anything other than intended and as described in the manual. Any attempt of repairs or alterations by someone other than the original supplier will invalidate the guarantee and result in refusal of warranty claims.

Persons who are familiar with the operating manual and the applicable regulations concerning working safety and accident prevention on may only use the network card. This unit is not intended to be used by persons (including children) with limited physical, sensory or mental aptitude or lack of experience and/or knowledge unless they are supervised by a person responsible for their safety or have received instructions as to how the device is used properly. The technical specifications of this product may change without prior notice.

6 Disposal Instructions

The European Directi ve (WEEE) requires that old electrical and electronic appliances shall be disposed of separately from normal household garbage for opti mal recycling. The component parts must be separated, collected and sent for recycling or disposal in an environment-friendly manner. Otherwise, toxic and dangerous substances could cause enduring damage to the environment if disposed of incorrectly. As a consumer you are legally obligated (Electrical and Electronic Equipment Act-ElektroG) to return electronic equipment at the end of its lifeti me to their manufacturer, point of sale, public collecti on points or importer free of charge.

The relevant local laws apply here. The symbol on the product, in the instructi ons or on its packing indicates these regulati ons. The reuse or recycling of materials and old units makes an important contributi on towards protecti ng the environ- ment.

WEEE guideline: 2012/19/EU WEEE register number: DE 94495668

CSL Computer GmbH & Co. KG, herewith declares that this product 41731/20160920DG005 conforms to the principle requirements and other relevant sti pulati ons. The complete Declarati on of Conformity can be obtained from: CSL Computer GmbH & Co. KG, Sokelantstraße 35, 30165 Hannover