302592 - Other computer accessories CSL - Free user manual and instructions

Product type	External hard drive enclosure
Brand	CSL
Model	302592
Internal interface	Serial ATA (SATA)
External interface	USB 3.0 micro-B
Compatible disk format	2.5 inches (6.4 cm)
Maximum disk height	9.5 mm
Disk mounting	Screwless (with foam stickers)
Supported protocol	UASP (USB Attached SCSI Protocol)
Compatible operating systems	Windows XP or later, macOS 10.4.5 or later
Power supply	Via USB port (bus-powered)
Approximate dimensions	13 x 8 x 1.5 cm
Approximate weight	50 g
Package contents	Enclosure, USB 3.0 cable, manual
Main functions	Turn an internal hard drive into an external storage device
Maintenance and cleaning	Wipe with a dry cloth, avoid moisture
Safety instructions	Do not open, avoid moisture, use in a dry place
Recycling	Do not dispose of with household waste (WEEE)
Warranty	Legal warranty, repair only by the manufacturer
WEEE registration number	94495668

Frequently Asked Questions - 302592 CSL

What types of hard drives can I install in the CSL 302592 enclosure?

The enclosure accepts 2.5-inch hard drives (6.4 cm format) with a maximum height of 9.5 mm. It is compatible with SATA drives (Serial ATA). SSDs of the same format are also compatible.

Do I need to install drivers to use the enclosure?

No, on Windows (XP or later) and macOS (10.4.5 or later), the enclosure is recognized automatically. No manual driver installation is required.

How to install the hard drive in the enclosure?

Open the enclosure, insert the hard drive aligning the SATA connectors. No screws are required: if the drive is thinner than 9.5 mm, use the provided foam stickers to secure it. Then close the enclosure.

Does the enclosure support UASP protocol?

Yes, the enclosure supports UASP (USB Attached SCSI Protocol), which can improve transfer speeds compared to standard BOT mode, provided your system and USB controller support it.

Can I use the enclosure with a USB 2.0 cable?

Yes, the enclosure is backwards compatible with USB 2.0 and even USB 1.1, but speeds will be limited to that interface. For optimal performance, use a USB 3.0 port.

Do I need to format the hard drive before using it?

If the drive is new or has no partition, you will need to format it via your operating system. The enclosure does not require any specific formatting. On Windows, use Disk Management; on macOS, Disk Utility.

Is the enclosure powered only via USB?

Yes, the enclosure draws power from the USB port. It has no external power supply. Ensure the USB port provides enough current (typically 0.9 A for USB 3.0). Some power-hungry hard drives may require a dual port or Y-cable.

What safety precautions should be taken?

Avoid contact with moisture, do not open the enclosure after installation, ground yourself before handling the hard drive, and use the device only in a dry place. Do not expose it to high temperatures or shocks.

Is the enclosure compatible with SSDs?

Yes, it is perfectly compatible with SSDs in 2.5-inch format and maximum thickness of 9.5 mm. SSDs are often thinner, so use the foam stickers to avoid vibrations.

What to do if the enclosure is not recognized by the computer?

Check that the USB cable is properly connected, try another USB port, test the hard drive directly on a SATA port (if possible) to check its status. Also ensure the drive is correctly inserted into the enclosure. If the problem persists, the enclosure or drive may be defective.

USER MANUAL 302592 CSL

USB 3.0 Enclosure for 2,5" SATA hard disks

Thank you for choosing this product from CSL and for placing your trust in our company. Before using the USB 3.0 enclosure for the first time, please read this manual carefully to ensure your long-term enjoyment of this product. For future reference, please keep this manual.

1 Scope of delivery

• Hard-disk enclosure
  • USB 3.0 connection cable
• User manual

2 Technical specifications

External connection micro-B USB 3.0
Internal connection Serial ATA (SATA)
Hard-disk form factor 2,5" / 6,4cm
Max. height of HDD up to 9,5mm
Tested operating systems	• Windows XP or higher• MacOS 10.4.5 or higher
Features	• UASP• Screwless

3 Features

The hard-disk enclosure offers you the opportunity to use a hard-drive as an external drive. For this, please install your serial-ATA hard-drive into the enclosure. After that you can power the device via the supplied power adapter and connect it with the computer using the supplied USB cable.

A manual driver installation is not required.

Note: Screws are not necessary to mount the HDD in the case. If you use a disk drive of low height, please use the adhesive foam stickers on the surface of the drive to avoid space for movements.

Attention!

4 Safety instructions and disclaimer

Do not attempt to service this product by yourself as opening or removing covers may result in fire, electric shock or equipment damage. Please avoid any contact to the electric current. This product is only licensed for indoor use and dry areas. Please protect it from water, rain, snow or high humidity and keep it away from high temperatures and direct sunlight.

Do not expose this product to extreme and sudden changes of temperature or heavy vibrations; this may lead to damage of the internal electronic part of this unit. Check this product for signs of damage before putting it in operation.

In case the device received any damage, it should not be used. Please contact our customer support. Please observe the relevant national provisions and legal restrictions. Do not use this product for anything other than intended and as described in the manual.

Any attempt of repairs or alterations by someone other than the original supplier will invalidate the guarantee and result in refusal of warranty claims. Persons who are familiar with the operating manual and the applicable regulations concerning working safety and accident prevention may only use this device.

This unit is not intended to be used by persons (including children) with limited physical, sensory or mental aptitude or lack of experience and/or knowledge unless they are supervised by a person responsible for their safety or have received instructions as to how the device is used properly. The technical specifications of this product may change without prior notice.

5 Disposal Instructions

The European Directive (WEEE) requires that old electrical and electronic appliances shall be disposed of separately from normal household garbage for optimal recycling. The component parts must be separated, collected and sent for recycling or disposal in an environment-friendly manner. Otherwise, toxic

and dangerous substances could cause enduring damage to the environment if disposed of incorrectly.

As a consumer you are legally obligated (Electrical and Electronic Equipment Act-ElektroG) to return electronic equipment at the end of its lifetime to their manufacturer, point of sale, public collection points or importer free of charge. The relevant local laws apply here. The symbol on the product, in the instructions or on its packing indicates these regulations. The reuse or recycling of materials and old units makes an important contribution towards protecting the environment.

WEEE guideline: 2012/19/EU
WEEE register number: DE 94495668

WD Plus GmbH, herewith declares that this product 302592/20170331SZ142 conforms to the principle requirements and other relevant stipulations. The complete Declaration of Conformity can be obtained from: WD Plus GmbH, Wohlenbergstraße 16, 30179 Hannover