S827 - Heating Bimar - Free user manual and instructions

USER MANUAL S827 Bimar

This product is only suitable for well insulated spaces or occasional use.

Close-up of a pen tip and a circular mechanical component (no text or symbols visible)

Diagram showing a curved arrow pointing from a vertical structure with parallel lines, no text or symbols present.

Diagram showing a stick figure with a downward arrow and a circular object, possibly indicating a process or movement.

60

Simple line drawing of a mechanical device with rollers and a gear (no text or symbols)

Diagram of a mechanical assembly with a tool and component, no visible text or symbols

=lease read these instructions carefully before using the appliance and teach other how to use it, when necessary.

Keep booklet handy for further use.

In case of doubt about what is written in the following instructions please contact the company before using the product.

This symbol highlights instructions and precautions for safe use.

Warnings and appliance installation, use, cleaning and maintenance procedures may be updated slightly from those described in this manual; for further details, please consult the updated on-line manual at

www.bimaritaly.it.

This symbol indicates the high-low position: Always bear this in mind when adjusting the wheels for use in the correct position.

This symbol indicates: WAR“I”G: in order to avoid overheating, do not cover the appliance.

GE"ERAL ADVICE

- This appliance is destined only to the heating of domestic or similar environments and in compliance with these instructions. It has considered only a supplementary source of heating and not a heating element.

This appliance is intended to be used in household and applications such as:

• staff kitchen in shops, offices and other working environment
• farm houses
• by clients in hotels, motels and other residential environment
• bed and breakfast environments

- The appliance must not be used in dusty environments or in the presence of extremely volatile materials which could obstruct heat exchanger, nor in very damp environments, in the presence inflammable products, outdoors. Any other use is to be cons inappropriate and therefore dangerous. The manufacturer can held responsible for eventual damage caused by inappropriate

im-ro-er or irres-onsible use and/or for re-airs made to the unauthorized -ersonnel.

- The a--liance reaches @uite a high tem-erature when working; contact must be limited to the handle and -lastic knobs. Avoid conta heating element.

- Children under 3 years of age should be ke-t away unless continuously su-ervised. Children aged between 3 and 8 years shall only s on/off the a--liance only if it has been -laced or installed in normal o-erating -osition and they have been given su-ervis instruction concerning use of the a--liance in a safe wa understand the hazards involved. Children aged between 3 a shall not -lug in, regulate and clean the a--liance or -erform maintenance.

CAUTI”“: Some –arts of this –roduct can become very hot and burns. =articular attention has to be given where children and –eo–le are –resent.

- This a--liance can be used by children aged 8 or more years with reduced -hysical, sensory or mental ca-abilities or life experience and knowledge can use this a--liance only if they given su-ervision or instruction concerning use of the a--lia way and if they understand the hazards involved. Children sh lay with the a--liance. Cleaning and user maintenance should made by children without su-ervision.

- Attention: when using electric a—liances, the basic safety –recautions must always be observed to avoid risks of fire, electric shocks –hysical injury.

- Do not touch the heater with wet hands or feet.

- Do not ex-ose the heater to the external weather conditions (sun, rain, etc.).

- Do not move the a--liance when it is in function.

• If the appliance should fall over or show signs of faulty operation, disconnect the electrical cable immediately. Check that n damaged and switch on after the appliance has been the checked: in case of doubt, contact @ualified professional per
• Do not pull on the power cord or the appliance to unplug the appliance from the wall socket. Never move the appliance by pulling the
• Unplug the appliance when not in use.

Don't leave the appliance unattended while it is connected to supply.

• Do not move the appliance when it is in function.
• In order to avoid any risk of electrical shock, never immerse the plug, the mains cable and the appliance in water or in any other li@
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly @ualified person in order to av
• Never use the radiator to dry damp garments.
• Never use this heater in the immediate surroundings of a bath, a shower or a swimming pool, to prevent any danger of electrical shock positions where it can be pushed and/or damaged.
• WARNING: this heater is not e@uipped with a device to co the room temperature. Do not use this heater in small room when they are occupied by person not capable of leaving t room on their own, unless constant supervision is provided
• Never use the appliance in environments smaller ^2 to draw a mere inflammable li@uids or products are stored.
• The appliance must not be located immediately below a sock

• The power socket must be easy to reach so the plug can be re @quickly in case of emergency.
  • To avoid risk of fire do not use the appliance with a timer, a programmer or with a system that can switch the appliance automatically fire risk exists if the heater is covered or positioned incorrect

• In the case of a breakdown or fault, switch the appliance off and have it checked by a professionally @ualified technician; repairs un@ualified people can be dangerous and render void the wa

• All repairs should be made by a competent @ualified electrician. Any faulty appliances should be returned to this service.
• This radiator is filled with a precise @quantity of special oil. Repairs that re@uire to open the oil container, are only to be made by the Manufacturer or his service agent, who should be contacted an oil leak.
• When scrapping the heater, follow the regulations concerning the disposal of oil.

I"STALLATI""

• After removing the packing materials, check that the appliance is in perfect condition; if you are unsure, do not use it and ask for @ualified professional help. The packing materials (plastic bags, polystyrene foam, nails, etc.) must be kept out the reach of children because they are potential sources of danger; they must be disposed of in accordance with current law.
• Before connecting the appliance, check that the voltage shown on the data plate matches that of your local power supply and that the electric plug is grounded. In the event of incompatibility between the electric outlet and the appliance plug, replace the outlet with another more suitable type by professionally @ualified personnel, who will make sure that the outlet wiring section is appropriate for the absorbed power of the appliance. In general, the use of adapters or extension cords is not recommended; if their use cannot be avoided, they must conform to existing safety standards and their current capacity (amperes) must not be less than the maximum appliance capacity.
• The appliance must be positioned at a safe distance from heating sources, inflammable materials (curtains, cloth, etc.), inflammable gas or explosive materials and from materials that may be deformed by high temperatures. Make sure that a space of at least 1 metre is left free in front of the appliance, and 50 cm of free space at each side.
• Stand the appliance on a horizontal, flat surface or table; “ever place the appliance on a sloping surface as this can cause it to fall over. “ever lay the electric cord under rugs or carpets.
• Make sure that the cable is positioned correctly, that it is not in contact with hot elements or sharp edges, that it is not wound around the appliance, that it is not twisted, or in a position which can cause the appliance to fall over. Check that the cable cannot cause tripping in order to prevent accidental falls or injury.

ASSEMBLY

The wheel mounting brackets must be fixed to the underside (see up-down arrow on the label placed on the appliance) and at the ends of the appliance to ensure stability; the wheels must be pointing downwards and must be perfectly level. To assemble follow these instructions (refer to the figures alongside):

1. Unscrew the nuts from the wheels (turning them in an anti-clockwise direction), position the flat washers on the pins of the screws, insert them into the holes at the end of the bracket, position the spring washers in place and turn the nuts in a clockwise direction to tighten them properly.

Close-up of a pen tip interacting with a circular mechanical component (no text or symbols visible)

1. Turn the radiator upside down and lay it on the ground on a cloth or other soft surface, with the lower part facing upwards.
2. Insert the brackets with the assembled wheels in the lower part of the radiator, moving them between the elements located at the far ends of the radiator between:

- the last and second-last element

- the first and second element, so that the central holes of the cross bar line up with the screws, as shown in the figure to the side.

Secure the brackets in place using the U-shaped hooks provided, making sure that the cross bars are secured using the dedicated wingnuts.

Diagram showing a curved arrow interacting with layered structures (no text or symbols)

Simple line drawing of a stick figure with a curved object and downward arrow, no text or symbols present

Diagram showing a mechanical or electrical component with a directional arrow, no visible text or symbols

Illustration of a kitchen appliance with a cat on top (no text or symbols)

Diagram of a mechanical assembly with a tool and component, no visible text or symbols

Thanks to the wheels, the radiator does not heat the surface on which it rests, and air can circulate naturally. The radiator can be moved easily on its wheels, using the folding handle at the top.

Attention: for the first use, leave it operating at maximum power for at least two hours. During this operation, ventilate the room well to eliminate the “new” smell emanating from the appliance.

USE

Before each use, verify that the unit is in good condition, the electric cord is not damaged, if the power cord is damaged, it must be replaced by the manufacturer or a competent @ualified electrician or a person with similar @ualifications, in order to avoid any risk.

The radiator can be adjusted as follows:

-Selector. Turn the relative knob (C) clockwise to select functions: 0 = off, 1 = minimum, 2 = medium, 3 = maximum (for values, see chart below).

- Room thermostat. Set (using relative knob B) the room temperature and start the radiator in continuous mode until the set temperature is reached: if these drops, the radiator restarts for the time necessary to re-establish the set value. If the knob is turned completely anticlockwise, the radiator remains off “-”, if it is turned completely clockwise the maximum temperature is set “+”; for intermediate values the temperature increases as the knob is turned towards the Maximum position and vice versa.

The lamp is on when the heater is running, if it reaches the set temperature, the light goes out and turns back on as soon as it decreases.

The radiator has an anti-tipping switch inside which allows it to function only when the appliance is vertical, and switches it off if it tilts.

Selettore/Type	HO427	HO429	HO431
0	0W	0W	0W
1	600W	800W	1000W
2	900W	1200W	1500W
3	1500W	2000W	2500W

Follow these steps to use the radiator correctly:

1) Insert the plug into the power socket.
2) Turn the thermostat dial (B) to the position of the re@uired temperature.
3) Use the specific switches (C) to turn on the appliance and to select the re@uired power:
4) Turn the switches to "0" position to turn off the appliance, and remove the plug from the power socket.
5) To switch off the appliance, turn the thermostat knob to minimum/“-“, the selector to “0” and remove the plug from the power socket.

Never leave the appliance connected to the socket if it is not in use, especially for long periods.

CLEANING AND MAINTENANCE

Attention: before cleaning, switch off the appliance, unplug and wait until it has cooled down completely.

• To clean the casing use a soft damp cloth; do not use abrasive products.
• =periodically check that the air-intake grill is not obstructed by fuzz or threads.
• When the radiator is not in use it must be covered and stored in a dry place. We recommend using the original packing to preserve it from dust and humidity.
• When you decide that the appliance is no longer re@uired, we recommend making it inoperative by cutting the power cord (after ensuring that the cable plug has been disconnected from the socket) and ensure that any dangerous parts are made harmless if children are allowed to play with them.

IM=ORTANT INFORMATION FOR CORRECT DIS=OSAL OF THE =RODUCT IN ACCORDANCE WITH EC DIRECTIVE 2011/65/EU.

At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative conse@uences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.

Illustration of a pen and a circular object with a small protrusion (no text or symbols)

Diagram showing a hand pressing down a curved arrow on a striped surface (no text or symbols)

Diagram showing a person using a tool to interact with a device, with a downward arrow indicating interaction or action.

Diagram showing a mechanical or electrical component with an arrow indicating direction (no text or symbols present)

Illustration of a mechanical device with circular components and a black cat silhouette (no text or symbols)

Illustration of a robotic arm interacting with a mechanical device (no text or symbols visible)

Close-up of a mechanical component with a pointed tip and a circular base (no visible text or symbols)

graph TD
    A["Cut through fillet"] --> B["Close fillet"]
    B --> C["Transfer to part"]
    C --> D["Assembly with tools and nut"]
    D --> E["Final assembly with tools and nut"]