WA3648 - Battery WORX - Free user manual and instructions

Product type	Rechargeable battery
Brand	Worx
Model	WA3648
Technology	Lithium-Ion (Li-Ion)
Nominal voltage	20 V Max
Capacity	2.0 Ah (typical)
Intended use	Worx cordless tools
Charging instructions	Use specified Worx charger
Charging temperature	0 °C to 45 °C
Storage temperature	0 °C to 45 °C
Do not expose to fire or heat	Yes
Do not short-circuit	Yes
Do not open or disassemble	Yes
Cleaning	Dry, clean cloth
Recycling	Do not dispose of in household waste; recycle
Symbols	Separate collection, do not burn
Protection	Deep discharge protection
Dimensions (approx.)	110 x 65 x 55 mm
Weight (approx.)	0.5 kg
Package contents	One battery, manual
Spare parts and repairability	The battery contains no user-serviceable parts. For any repairs, contact an authorized after-sales service.

Frequently Asked Questions - WA3648 WORX

How to charge the WA3648 battery?

To charge the battery, use the specified Worx charger (not supplied). Plug the charger into a mains outlet, then insert the battery. The charger indicator shows charging. Allow the battery to cool down if it is hot before charging.

What is the charging time of the battery?

The charging time depends on the charger and capacity. With a standard charger, allow approximately 1 to 2 hours for a full charge. Consult the charger specifications.

Can I use the WA3648 battery with other tools?

This battery is designed for Worx cordless tools only. Check compatibility on the tool label or in the manual.

How do I know when the battery is fully charged?

Most Worx chargers have an LED indicator that turns green or goes out when the battery is fully charged.

What should I do if the battery does not charge?

If the battery does not charge, first check that the charger is plugged in and working. Ensure the battery is at room temperature (0-45°C). If the problem persists, contact Worx customer service.

How to store the battery long-term?

Store the battery in a dry, cool place between 0 °C and 45 °C. Avoid direct sunlight. If not using for an extended period, charge it to about 50%.

Can I expose the battery to heat or sunlight?

No, never expose the battery to excessive heat or fire. Storage in sunlight is not recommended as it may damage the battery.

How to clean the battery?

Clean the contacts and housing with a clean, dry cloth. Do not use solvents or water.

What to do in case of battery leakage?

In case of leakage, avoid contact with the liquid. If liquid contacts skin or eyes, rinse thoroughly with water and consult a doctor.

How to recycle the battery?

Do not dispose of the battery in household waste. Take it to a collection point for used batteries or recycle it according to local regulations.

USER MANUAL WA3648 WORX

WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

Use battery pack for WORX cordless products only. Refer to the marking label and instruction manual provided with product.

a) Do not dismantle, open or shred cells or battery pack.
b) Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
c) Do not expose battery pack to heat or fire. Avoid storage in direct sunlight.
d) Do not subject battery pack to mechanical shock.
e) In the event of battery leaking, do not allow the liquid to come into contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
f) Keep battery pack clean and dry.
g) Wipe the battery pack terminals with a clean dry cloth if they become

dirty.

h) Battery pack needs to be charged before use. Always refer to this instruction and use the correct charging procedure.

i) Do not maintain battery pack on charge when not in use.

j) After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance.

k) Recharge only with the charger specified by Worx. Do not use any charger other than that specifically provided for use with the equipment.

I) Do not use any battery pack which is not designed for use with the equipment.

EN 4

m) Keep battery pack out of the reach of children.

n) Retain the original product literature for future reference.

o) Remove the battery from the equipment when not in use.

p) Dispose of properly.

q) Do not mix cells of different manufacture, capacity, size or type within a device.

r) Keep the battery away from microwaves and high pressure.

SYMBOL

	Batteries may enter water cycle if disposed improperly, which can be hazardous for ecosystem. Do not dispose of waste batteries as unsorted municipal waste.
	Do not burn

Li-lon battery This product has been marked with a symbol relating to 'separate collection' for all battery packs and battery pack. It will then be recycled or dismantled in order to reduce the impact on the environment. Battery packs can be hazardous for the environment and for human health since they contain hazardous substances.

OPERATION INSTRUCTIONS

Recommendations for optimal handling of the battery NOTE:

1. Your battery pack is UNCHARGED. To ensure full capacity of the battery, completely charge the battery in the battery charger before using your power tool for the first time.

2. A battery pack will slowly lose its charge when kept out of the charger or left in an unplugged charger for a long time. It may need to be recharged before use.

The Li-Ion battery is protected against deep discharging. When the battery is empty, the machine is switched off by means of a protective circuit: The tool no longer rotates. In a warm environment or after heavy use, the battery pack may become too hot to permit charging. Allow time for the battery to cool down before recharging. The Li-Ion battery can be charged at any time without reducing its service life. Interrupting the charging procedure does not damage the battery.

How to charge the battery

Refer to the instruction manual provided with product or charger.

WARNING: Do not continue to press the On/Off Switch after the machine has been automatically switched off. The battery could be over-discharged.

Store the battery only within a temperature range between 0 °C and 45°C. As an example, do not leave the battery in the car in summer time.

A significantly reduced working period after charging indicates that the battery is used and must be replaced.

TRANSPORT

The contained Li-Ion batteries are subject to the dangerous goods legislation requirements.

Dispatch batteries only when the battery housing is undamaged. Pack up the batteries in such a manner that cannot move around in the packaging.

MAINTENANCE AND SERVICE

Occasionally clean the venting slots of the battery using a soft, clean and dry brush.

When the battery is no longer operative, please refer to an authorized after-sales service agent for WORX power tools.

Occasionally clean the venting slots of the battery using a soft, clean and dry brush.

MANUTENCAO E SERVICO

Copyright © 2022, Positec. All Rights Reserved.

AR01323202