IKEA TRÅDFRI 403.647.48 - Smart Home

TRÅDFRI 403.647.48 - Smart Home IKEA - Free user manual and instructions

Find the device manual for free TRÅDFRI 403.647.48 IKEA in PDF.

📄 92 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice IKEA TRÅDFRI 403.647.48 - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Wireless ON/OFF switch
Model TRÅDFRI 403.647.48
Brand IKEA
Dimensions (approx.) 60 × 30 × 12 mm
Weight (with battery) Approx. 30 g
Power supply CR2032 battery, 3.0 V
Range 10 m in open field
Operating frequency 2405 – 2480 MHz
Output power 3 dBm
Usage Indoor only
Operating temperature 0 °C to 40 °C
Main functions On/off, dimmer, pairing with IKEA Home smart products
Max number of paired devices 10 per switch
Reset Press the pairing button 4 times within 5 seconds
Battery life Approx. 2 years
Care and cleaning Soft dry cloth, no solvents
Spare parts / repairability Replaceable CR2032 battery
Safety Do not expose to heat or sunlight, risk of explosion if battery is incorrect
General information Compliant with environmental regulations, recycle according to local guidelines

Frequently Asked Questions - TRÅDFRI 403.647.48 IKEA

How to pair the switch with a new IKEA Home smart product?
Ensure the switch is in the ON position. Place it within 5 cm of the product to pair. Press the pairing button under the back cover for at least 10 seconds. A red light turns on and the targeted product flashes once. Pair one device at a time.
How to reset the switch?
To reset, press the pairing button 4 times within 5 seconds. This deactivates remote control and restores factory settings.
Which battery to use and how to replace it?
Use a CR2032 battery (3.0 V). Open the front cover to access the battery. Replace with a new one respecting polarity. The battery lasts about 2 years in normal use.
What is the maximum range of the switch?
The range is 10 meters in open field. It can be reduced by building materials (walls, furniture) and device placement.
Can I use the switch outdoors?
No, the switch is designed for indoor use only. It withstands temperatures from 0 °C to 40 °C.
What to do if the switch stops responding?
First check the battery: if the red light flashes during use, the battery is low. Replace with a new one. If the problem persists, try resetting the switch (4 quick presses) or re-pair it with your devices.
How to clean the switch?
Clean it with a soft dry cloth. Never use abrasive products or chemical solvents that could damage the casing.
Can I pair a switch with more than 10 devices?
No, each switch can be paired with a maximum of 10 IKEA Home smart devices. To add more, you need to use another switch.
How to know if the battery is low?
A red LED flashes on the switch when you operate it. This indicates the battery needs to be replaced.
Is the switch compatible with all IKEA Home smart products?
Yes, it is designed to work with all products in the IKEA Home smart range (bulbs, sockets, etc.). Make sure they are nearby during pairing.

User questions about TRÅDFRI 403.647.48 IKEA

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Smart Home in PDF format for free! Find your manual TRÅDFRI 403.647.48 - IKEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TRÅDFRI 403.647.48 by IKEA.

USER MANUAL TRÅDFRI 403.647.48 IKEA

Design and Quality IKEA of Sweden

English 4 Svenska 28
Deutsch 7 Česky 31
Français 10 Español 34
Nederlands 13 Italiano 37
Dansk 16 Magyar 40
Íslenska 19 Polski 43
Norsk 22 Eesti 46
Suomi 25 Latviešu 49

Lietuvių 52

Português

Româna

Slovensky 61

Български 64

Hrvatski

Ελληνικα 70

Русский 73

55 Українська 76

58 Srpski 79

Slovenščina 82

Türkçe 85

67 88 عربي

WIRELESS ON/OFF SWITCH FUNCTIONS

ON - Dim Up

Press to turn your IKEA Home smart product on. Press and hold to dim up.

OFF - Dim Down

Press to turn your IKEA Home smart product off. Press and hold to dim down.

Pairing: Add IKEA Home smart products to your system. See instructions below.

ADDING DEVICES TO YOUR WIRELESS ON/OFF SWITCH

When the wireless ON/OFF switch is sold together with an IKEA Home smart product (in the same package), they are already paired.

To add more products, just repeat the steps below:

Make sure that the main power is turned on.

  1. Hold the ON/OFF switch close to the IKEA Home smart device you want to add (no more than 5 cm away).
  2. Press and hold the pairing button for at least 10 seconds, you can find the pairing button under the rear cover.
  3. A red light will shine steadily on the ON/OFF switch. On your IKEA Home smart device the pairing indicator will begin to dim and flash one time to indicate that it has been successfully paired.

Up to 10 IKEA Home smart devices can be paired with 1 ON/OFF switch.

Make sure to pair them one at a time. If the IKEA Home smart products are close to each other, disconnect those that have already been paired from the main power.

For wireless ON/OFF switch:

Press the pairing button 4 times within 5 seconds.

CHANGING THE BATTERY

When the wireless ON/OFF switch is used regularly and as intended, the battery will last for approximately 2 years.

When it's time to replace the battery, a red LED indicator will flash when you toggle the ON/OFF switch.

Open the rear cover, and replace the battery with a new CR2032 battery.

CAUTION!

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

IMPORTANT!

  • The wireless ON/OFF switch is for indoor use only and can be used in temperatures ranging from 0°C to 40°C.
  • Do not leave the wireless ON/OFF switch in direct sunlight or near any heat source, as it may overheat.
  • The range between the wireless ON/OFF switch and the receiver are measured in open air. Different building materials and placement of the units can affect the wireless connectivity range.

CARE INSTRUCTIONS

To clean the wireless ON/OFF switch wipe with a soft dry cloth.

NOTE!

Never use abrasive cleaners or chemical solvents as this can damage the product.

TECHNICAL DATA

Type: E1743 wireless ON/OFF button

Input: 3.0V, CR2032 Battery

Range: 10 m in open air

For indoor use only

Operating frequency: 2405-2480Mhz

Output power: 3 dBm

Manufacturer: IKEA of Sweden AB

Address:

Box 702, SE-343 81 ÄLMHULT

IKEA TRÅDFRI 403.647.48 - TECHNICAL DATA - 1

The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.

FUNKDIMMER - FUNKTIONEN

Fabricant : IKEA of Sweden AB

Adresse :

Box 702, 343 81 Älmhult, SUÈDE

IKEA TRÅDFRI 403.647.48 - FUNKDIMMER - FUNKTIONEN - 1

Producent: IKEA of Sweden AB

Adresse:

Box 702, SE-343 81 ÄLMHULT, SVERIGE

IKEA TRÅDFRI 403.647.48 - FUNKDIMMER - FUNKTIONEN - 2

Framleiðandi: IKEA of Sweden AB

Heimilsfang:

Box 702, 343 81 ÄLMHULT

IKEA TRÅDFRI 403.647.48 - FUNKDIMMER - FUNKTIONEN - 3

Produsent: IKEA of Sweden AB

Adresse:

Boks 702, SE-343 81 ÄLMHULT

IKEA TRÅDFRI 403.647.48 - FUNKDIMMER - FUNKTIONEN - 4

Producent: IKEA of Sweden AB

Adres: Box 702, SE-343 81 ÄLMHULT

IKEA TRÅDFRI 403.647.48 - FUNKDIMMER - FUNKTIONEN - 5

Tootja: IKEA of Sweden AB

Aadress:

Box 702, SE-343 81 ÄLMHULT

IKEA TRÅDFRI 403.647.48 - FUNKDIMMER - FUNKTIONEN - 6

© Inter IKEA Systems B.V. 2018 AA-2136862-4

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : IKEA

Model : TRÅDFRI 403.647.48

Category : Smart Home