Curler Ceramic - Curling iron Create - Free user manual and instructions

Product type	Curling iron
Brand	Create
Model	Curler Ceramic
Coating	Ceramic
Temperature range	120 °C to 200 °C
Heat-up time	90 seconds to reach 200 °C
Auto lock	After 8 seconds, button lock
Audible signal	Beep after 8 seconds indicating curling is complete
Use	Dry or damp hair
Recommended strand size	5 cm wide, 0.5 cm thick
Safety	Closing lock for storage; do not use near water
Cleaning	Damp cloth, device off and cooled down
Power supply	Mains, check local voltage
Power cord	Do not wrap around the device
Included parts	Cool tip, upper and lower heating bar, temperature display, control button, power button, cable, heating plate, lock
Warranty	Do not repair yourself or warranty is void
Recycling	Do not dispose of with household waste; return to store

Frequently Asked Questions - Curler Ceramic Create

How to turn on and set the temperature?

Press the power button to turn on the device. Use the temperature control button to select between 120 °C and 200 °C.

How long does it take for the device to heat up?

The device reaches 200 °C in 90 seconds.

On what types of hair can I use the curling iron?

It is suitable for dry or damp hair. For best results, hair should be clean and free of styling products.

What strand size to use for optimal curling?

Take strands about 5 cm wide and 0.5 cm thick.

How to clean the curling iron?

Make sure the device is off, unplugged, and completely cooled. Clean with a damp cloth. Never use abrasive products.

How to lock the plates for storage?

Use the closing lock switch to lock the heating plates after cooling. Store in a heat-resistant bag.

An odor is released during use, is this normal?

Yes, a characteristic odor may be produced by the generated ions. It is not harmful to humans.

Can I use styling products (hairspray, mousse, gel) with the device?

No, never use the device in combination with mousse, spray, gel, etc. The plates must remain clean.

How to know when curling is complete?

After about 8 seconds, the device emits a beep to indicate that curling is complete.

Can the device be used in a bathroom?

It is not recommended to use it near water. If you use it in a bathroom, unplug it after use, as water remains a hazard even when off.

USER MANUAL Curler Ceramic Create

Line drawing of a cylindrical device with a handle and internal components (no text or symbols)

HAIR WAVER

ONDULADOR DE PELO

USER MANUAL

CREATE CREATE TE CREATE CRE CREATE CREATE TE CREATE CRE CREATE CREATE TE CREATE CRE CREATE CREATE TE CREATE CRE CREATE CREATE TE CREATE CRE CREATE CREATE TE CREATE CRE CREATE CREATE TE CREATE CRE CREATE CREATE TE CREATE CRE CREATE CREATE TE CREATE CRE

CREATE CREATE
ATE CREATE CR
CREATE CREATE
ATE CREATE CR
CREATE CREATE
ATE CREATE CR
CREATE CREATE
ATE CREATE CR
CREATE CREATE
ATE CREATE CR
CREATE CREATE
ATE CREATE CR
CREATE CREATE
ATE CREATE CR
CREATE CREATE
ATE CREATE CR
CREATE CREATE
ATE CREATE CR
CREATE CREATE
ATE CREATE CR
CREATE CREATE
ATE CREATE CR

INDEX

ENGLISH

List of parts 6

Safety instructions 7

Operation 8

Cleaning and maintenance 8

ESPAÑOL

Listado de partes 9

Thank you for choosing our hair waver. Before using the appliance, and to ensure the best use, carefully read these instructions.

The safety precautions enclosed herein reduce the risk of death, injury and electrical shock when correctly adhered to. Keep the manual in a safe place for future reference, along with the completed warranty card, purchase receipt and package. If applicable, pass these instructions on to the next owner of the appliance. Always follow basic safety precautions and accident-prevention measures when using an electrical appliance. We assume no liability for customer failing to comply with these requirements.

LIST OF PARTS

1. Cool tip

2. On / Off button

3. Upper heating barrel

4. Power cord

5. Temperature display

6. Lower heating plate

7. Temperature control button

8. Lock-in close

When using any electrical appliance, basic safety precautions should always be observed.

• Check if the voltage indicated on the appliance corresponds to the local main voltage before connecting the appliance.
• Check the condition of the power cord regularly. Do not use the appliance if the plug, the cord or the appliance itself is damaged.
• If the power cord is damaged, it must be replaced by professionals to avoid any hazard.
• Keep this appliance away from water. Do not use it near or over the bathtub, sinks, etc. When used in a bathroom, unplug the appliance after using since the proximity of water presents a risk, even when the appliance is turned off.
• Keep the appliance out of the reach of children.
• The heating plates and joint plastic parts can reach a high temperature quickly. Prevent heating surface of the appliance from contacting your skin.
• Only use the appliance on dry or damp hair.
• Do not leave the plates on your hair for more than a few seconds at a time as this may cause damage to your hair.
• Keep the appliance away from non-heat-resistant surfaces and never cover the appliance with anything (e.g. towel or cloth) when it's hot and heating.
  • Always unplug the appliance after use.
• Wait until the appliance has cooled down before storing it.
• Keep the heating plates clean and free of dust, dirt, styling spray and gel. Never use the appliance in combination with styling mousse, spray and gel, etc.
• Always return the appliance to a service center for examination or repair. Do not attempt to repair the appliance by yourself, otherwise your guarantee will become invalid.
• The plates have a ceramic coating. This coating will wear out in the course of time. When it happens, the appliance will still function normally.

• When using this appliance you may notice a characteristic smell. This is caused by the ions that are generated and it's not harmful to the human body.

• For the best result, hair should be clean and free from dirt, hair spray and hair cream, etc. Please dry your hair with a cloth or dryer until making sure that there is no extra water dropping from the hair.

• This professional hair waver is applicable to both dry and damp hair.

• Rest the waver on a smooth, flat surface and plug in the power cord. Never put the appliance on a surface that is not heat-resistant when it's heating up and when it's hot.

• Turn on the device by pressing the on/off switch and press the temperature control button to select from 120-200 °C. Never leave the appliance unattended when it's plugged in.
• The appliance will reach 200 °C in 90 seconds. A lock symbol will appear on the display after 8 seconds and then the on/off button and temperature control button will be locked. Long press the on/off switch for 2 seconds to unlock them.
• Comb or brush your hair so that it's disentangled and smooth.
• Work with hair sections that are about 2" wide and 1/4" deep. Place hair between the heating plates and press down firmly. After 8 seconds, the appliance will make a beeping sounds to alert the user that the curling is over.
• Repeat the process until the desired hairstyle is achieved. Let the hair cool before final combing.
• Press the lock-in close switch to close the waver for storage after it has cooled down.

CLEANING AND MAINTENANCE

1. Make sure the appliance is switched off and unplugged.
2. Let the appliance cool down completely on a heat-resistant surface. Never wind the power cord around the appliance.
3. Clean the appliance with a damp cloth.
4. Use the lock-in close switch to lock the heating plates before storing the appliance.
5. Place the waver in a heat-resistant pouch for easy storage and portability.

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable re-use of material resources. To return your used device, please use the return and collection systems or contact the retailer from where the product was purchased. They can take this product for environmental safe recycling.