LZ791A2 - Sink SMEG - Free user manual and instructions

Find the device manual for free LZ791A2 SMEG in PDF.

SMEG LZ791A2 - Sink
📄 42 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SMEG LZ791A2 - page 6
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Sink
Brand Smeg
Model LZ791A2
Dimensions (W x D x H) 80 x 50 x 20 cm (approx.)
Weight Approx. 10 kg
Material Non-porous composite (light or dark color)
Number of bowls Double bowl (approx.)
Number of holes 1 hole for faucet (approx.)
Installation Drop-in or undermount (depending on model)
Provided accessories Mounting kit, silicone seal (not included)
Use Kitchen sink
Cleaning Soft sponge, dish detergent, warm water
Stubborn stains (light) Diluted bleach (8h)
Stubborn stains (dark) Soft sponge, circular motions, detergent
Limescale stains Non-aggressive descaler, rinse thoroughly
Preventive maintenance Daily drying, weekly descaling
Precautions Do not place hot utensils, do not cut directly
Repairability Spare parts available via Smeg after-sales service
Warranty Manufacturer warranty subject to compliance with instructions
General information User manual available in PDF

Frequently Asked Questions - LZ791A2 SMEG

How to clean a Smeg LZ791A2 sink for the first time?
Before first use, it is recommended to wash the sink with a regular dish detergent and a soft sponge, then rinse and dry with a microfiber cloth.
How to remove stubborn stains on a light-colored sink?
Prepare a solution of bleach and warm water (3/4 - 1/4), apply to the stain, let it sit for about 8 hours (preferably overnight), then rinse thoroughly and dry carefully.
How to remove stubborn stains on a dark-colored sink?
Use a soft non-abrasive sponge with regular dish detergent using small circular motions. Rinse with warm water and dry carefully. Repeat if necessary.
Which cleaning products are not recommended for my Smeg sink?
Avoid alkaline detergents, ammonia, caustic soda, drain cleaners, steel wool, and abrasive sponges that could damage the surface.
How to prevent limescale stains on the sink?
Perform a descaling treatment at least once a week: fill the bowl with warm water, add two tablespoons of liquid detergent or a washing machine tablet, let it sit for 5 to 6 hours, rinse and dry.
Why should you not place hot pans directly on the sink?
High temperatures (up to 500°C) can cause discoloration and irreversible damage to the surface. Always use a trivet or wait for the utensils to cool down.
What is the best way to dry the sink after each use?
Dry the surface daily with a microfiber cloth to prevent prolonged water deposits that promote limescale formation.
Can I cut food directly on the sink?
No, it is not recommended to cut or chop directly on the surface as it may leave irreparable scratches. Always use a cutting board.
How to install the Smeg LZ791A2 sink?
Installation must be carried out by a qualified professional according to current standards. Silicone is not supplied. Clean the sink before installation to remove production residues.
What to do in case of persistent stains after several cleanings?
If stains persist after 1 to 2 treatments, you can repeat the process. For limescale stains, use a descaling agent diluted in warm water following the product instructions.

User questions about LZ791A2 SMEG

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Sink in PDF format for free! Find your manual LZ791A2 - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LZ791A2 by SMEG.

USER MANUAL LZ791A2 SMEG

SILICONE

Isometric diagram of a device with two stacked plates and directional arrows indicating movement or force (no text or symbols).

LAVELLO TOP

graph TD A["①"] --> B["Central Structure"] C["⑤"] --> B D["③"] --> B E["④"] --> B F["⑥"] --> B G["②"] --> B

Diagram of a layered mechanical or electronic component with upward arrows indicating motion or force, no text or symbols present.

TOP SILICONE LAVELLO

graph TD A["1"] --> B["2"] C["3"] --> D["4"] E["5"] --> F["6"] G["Bottom Left"] --> H["Bottom Right"] I["Bottom Right"] --> J["Bottom Left"]

Simple line drawing of a hand wiping a surface with motion lines (no text or symbols).

2. NON-ROUTINE MAINTENANCE

Simple line drawing of a cooking pot with crossed-out black X marks (no text or symbols).

SMEG LZ791A2 - NON-ROUTINE MAINTENANCE - 2

Before fitting the sink, it is advisable to wash it using standard dish detergent and a soft sponge to remove any manufacturing residues.

Rinse the sink thoroughly and dry it using a microfibre cloth.

SMEG LZ791A2 - NON-ROUTINE MAINTENANCE - 3

STANDARD INSTALLATION

Diagram illustrating a drill bit and screwdriver tool application, showing correct and incorrect states of the process.

SILICONE

Isometric diagram of a device with two stacked plates and directional arrows indicating movement or force (no text or symbols).

SINK TOP

graph TD A["1"] --> B["Central Fold"] C["2"] --> B D["3"] --> B E["4"] --> B F["5"] --> B G["6"] --> B

SMEG LZ791A2 - STANDARD INSTALLATION - 6

UNDERMOUNT INSTALLATION

TEMPLATE ① ②

15 mm Ø 11.5 mm

SILICONE

Diagram of a mechanical assembly with two stacked components and upward arrows indicating motion (no text or symbols)

TOP SILICONE SINK

graph TD A["1"] --> B["2"] C["3"] --> D["4"] E["5"] --> F["6"] G["Bottom Left"] --> H["Bottom Right"] I["Bottom Right"] --> J["Bottom Left"]

SMEG LZ791A2 - UNDERMOUNT INSTALLATION - 7

The packaging materials (plastic bags, expanded polystyrene, etc.) must not be left within reach of children as they are a potential hazard.

SMEG LZ791A2 - UNDERMOUNT INSTALLATION - 8

Installation and support should be undertaken by qualified individuals, in accordance with the applicable legal requirements.

The silicone is not included with the product. The sink shown in this guide is for illustrative purposes only.

SMEG LZ791A2 - UNDERMOUNT INSTALLATION - 9

1. ROUTINE MAINTENANCE

Cleaning your Smeg product is quick and simple. Even though the non-porous surface prevents liquids penetrating into the material, it is preferable to remove them immediately using a soft, non-abrasive sponge and standard dish detergent. You should then rinse the surface and dry it carefully using a microfibre cloth.

Simple line drawing of a hand wiping a surface with motion lines (no text or symbols)

2. NON-ROUTINE MAINTENANCE

Cleaning stubborn stains is not difficult: all you need to do is choose the right product and use it correctly.

SMEG LZ791A2 - NON-ROUTINE MAINTENANCE - 1

For stubborn stains on LIGHT-COLOURED products, you can use a solution of bleach and warm water (3/4 to 1/4), leaving it to act for eight hours (we recommend that this cleaning be performed during the night). Afterwards, rinse thoroughly and dry the entire surface carefully using a microfibre cloth. If the stains remain, the operation can be repeated one or two more times.

SMEG LZ791A2 - NON-ROUTINE MAINTENANCE - 2

For stubborn stains on DARK-COLOURED products, you can remove them directly with a soft, non-abrasive sponge and standard dish detergent, using small circular movements. When finished, rinse using warm water and carefully dry the entire surface using a microfibre cloth. If the stains remain, the operation can be repeated one or two more times.

SMEG LZ791A2 - NON-ROUTINE MAINTENANCE - 3

To remove limescale stains, we recommend the use of a non-corrosive descaling product diluted with warm water. Distribute the solution uniformly over the entire surface of the product. Clean with a soft, non-abrasive sponge using small circular movements and leave the product to act for several minutes (follow the instructions and conditions for use on the product label). When finished, rinse using warm water and dry carefully using a microfibre cloth.

Failure to follow the cleaning and maintenance instructions stated in this manual may invalidate the standard warranty provided by the manufacturer.

SMEG LZ791A2 - NON-ROUTINE MAINTENANCE - 4

To ensure that there is no change to the characteristics of the product, we recommend that users observe the following precautions:

- dry the surface of the product every day to avoid prolonged exposure to water that could lead to the build-up of limescale or stubborn stains

- do not use detergents that contain alkaline substances and aggressive liquids (such as ammonia, caustic soda or drain cleaners)

- do not remove traces of dirt using steel scourers or abrasive sponges that could damage the surface

- do not cut or chop directly on the surface of the product because this could cause irreparable scratches (always use chopping boards)

- avoid accidental knocks that could cause irreparable micro-damage

- do not place hot cookware, pans or coffee makers directly on the sink surface: stains from discolouration and/or damage could form in areas where hot items are placed

- avoid pouring boiling liquids directly into the sink without first turning on the cold tap and filling the sink with at least 1 cm of water, as this could damage the product

• to prevent the build-up of limescale, it is recommended that a descaling treatment be completed at least once a week. This is recommended in particular for dark-coloured sinks. Fill the tub with warm water and add two spoonfuls of liquid or powder dishwasher detergent or a dishwasher tab. Leave the solution for 5/6 hours. Rinse thoroughly and dry carefully.

Simple line drawing of a crossed-out kitchen counter with no text or symbols

Simple line drawing of a cooking pot with crossed-out diagonals (no text or symbols)

SMEG LZ791A2 - NON-ROUTINE MAINTENANCE - 7

Do not put pans or coffee makers that have just been taken off the heat (which sometimes reach 500°C) directly into sink.

Diagram illustrating a drill bit and screwdriver tool application, with a magnified view showing the process.

SILICONE

Isometric diagram of a device with two stacked plates and directional arrows indicating movement or force (no text or symbols)

SINK TOP

graph TD A["①"] --> B["Central Structure"] C["⑤"] --> B D["③"] --> B E["④"] --> B F["⑥"] --> B G["②"] --> B

SMEG LZ791A2 - NON-ROUTINE MAINTENANCE - 13

INSTALLATION UNDER THE TOP

1 2 PATTERN

15 mm Ø 11.5 mm

SILICONE

Diagram of a layered mechanical or electronic component with upward arrows indicating motion or force, no text or symbols present.

TOP SILICONE SINK

graph TD A["1"] --> B["2"] C["3"] --> D["4"] E["5"] --> F["6"] G["Bottom Left"] --> H["Bottom Right"]

Simple line drawing of a hand wiping a surface with a cloth (no text or symbols)

Simple line drawing of a cooking pot with steam rising, crossed by a diagonal line (no text or symbols)

Diagram illustrating a drill bit and screwdriver tool application, with a magnified view showing the process.

SILICONE

Isometric diagram of a device with two stacked plates and directional arrows indicating movement or force (no text or symbols)

SINK WORKTOP

graph TD A["1"] --> B["Object"] C["2"] --> B D["3"] --> B E["4"] --> B F["5"] --> B G["6"] --> B

UNDER-COUNTER INSTALLATIONSMEG LZ791A2 - INSTALLATION UNDER THE TOP - 14

TEMPLATE ① ②

15 mm Ø 11.5 mm

SILICONE

Diagram of a mechanical assembly with two stacked components and upward arrows indicating motion (no text or symbols)

WORKTOP SILICONE SINK

graph TD A["①"] --> B["②"] C["③"] --> D["④"] E["⑤"] --> F["⑥"] G["⑦"] --> H["⑧"]

Simple line drawing of a hand cleaning a surface with a cloth (no text or symbols)

Simple line drawing of a cooking pot with crossed-out black X marks (no text or symbols)

Diagram illustrating a drill bit and screwdriver tool application, with a magnified view showing the process.

SILICONE

Isometric diagram of a device with two stacked plates and directional arrows indicating movement or force (no text or symbols)

SINK COUNTERTOP

graph TD A["1"] --> B["Central Object"] C["2"] --> B D["3"] --> B E["4"] --> B F["5"] --> B G["6"] --> B

Diagram of a mechanical assembly with two stacked components and upward arrows indicating motion (no text or symbols)

COUNTERTOP SILICONE SINK

graph TD A["1"] --> B["2"] C["3"] --> D["4"] E["5"] --> F["6"] G["Bottom Left"] --> H["Bottom Right"] I["Bottom Right"] --> J["Bottom Left"]

Simple line drawing of a hand wiping a surface with a cloth (no text or symbols)

Simple line drawing of a cooking pot with crossed-out diagonals (no text or symbols)

Diagram illustrating a drill bit and screwdriver tool application, with a magnified view showing the process.

SILICONE

Isometric diagram of a device with two stacked plates and directional arrows indicating movement or force (no text or symbols)

DISHWASHER LID

graph TD A["1"] --> B["Object"] C["5"] --> B D["3"] --> B E["4"] --> B F["6"] --> B G["2"] --> B

Diagram of a mechanical assembly with two stacked components and upward arrows indicating motion (no text or symbols)

LID SILICONE DISHWASHER

graph TD A["1"] --> B["2"] C["3"] --> D["4"] E["5"] --> F["6"] G["Bottom Left"] --> H["Bottom Right"] I["Bottom Right"] --> J["Bottom Left"]

Simple line drawing of a hand cleaning a surface with a cloth (no text or symbols)

Simple line drawing of a bowl with steam rising from a sink, crossed out by a black X (no text or symbols)

Diagram illustrating a drill bit and screwdriver tool application process, with Chinese labels.

SILICONE

Isometric diagram of a device with two stacked plates and directional arrows indicating movement or force (no text or symbols)

Diagram of a mechanical assembly with two stacked components and upward arrows indicating motion (no text or symbols)

Simple line drawing of a hand cleaning a surface with a cloth (no text or symbols)

2. UNPLANNED MAINTENANCE

Simple line drawing of a kitchen with a crossed-out black X symbol (no text or labels)

Diagram illustrating a drill bit and screwdriver tool application, showing correct/incorrect states of the process.

SILICONE

Isometric diagram of a device with two stacked plates and directional arrows indicating movement or force (no text or symbols)

SINK COUNTERTOP

graph TD A["①"] --> B["Central Structure"] C["⑤"] --> B D["③"] --> B E["④"] --> B F["⑥"] --> B G["②"] --> B

UNDER-COUNTER INSTALLATIONSMEG LZ791A2 - UNPLANNED MAINTENANCE - 7

TEMPLATE ① ②

15 mm Ø 11.5 mm

SILICONE

Diagram of a mechanical assembly with two stacked components and upward arrows indicating motion (no text or symbols)

BLAT SILICONE SINK

graph TD A["①"] --> B["②"] C["③"] --> D["④"] E["⑤"] --> F["⑥"] G["⑦"] --> H["⑧"]

Simple line drawing of a hand cleaning a surface with a cloth (no text or symbols)

2. IMMEDIATE MAINTENANCE

Simple line drawing of a cooking pot with steam rising, crossed by a diagonal line (no text or symbols)

Diagram illustrating a drill bit and screwdriver tool application, showing correct/incorrect states of the process.

SILICONE

Isometric diagram of a device with two stacked plates and directional arrows indicating movement or force (no text or symbols)

Diagram of a mechanical assembly with two stacked components and upward arrows indicating motion (no text or symbols)

SALT SHAKER SILICONE KITCHEN SINK

graph TD A["1"] --> B["2"] C["3"] --> D["4"] E["5"] --> F["6"] G["Bottom Left"] --> H["Bottom Right"] I["Bottom Right"] --> J["Bottom Left"]

Simple line drawing of a hand cleaning a surface with a cloth (no text or symbols)

Simple line drawing of a kitchen with a crossed-out black X symbol (no text or labels)

Diagram illustrating a drill bit and screwdriver tool application process with labeled components.

Silicone

Isometric diagram of a device with two stacked plates and directional arrows indicating movement or force (no text or symbols).

Diagram of a layered mechanical or electronic component with upward arrows indicating motion or force, no text or symbols present.

Two hand icons with different textures, one covering a cloth and the other covering a surface (no text or symbols).

Simple line drawing of a crossed-out kitchen counter with no text or symbols.

Simple line drawing of a cooking pot with crossed-out black lines (no text or symbols).

SMEG LZ791A2 - IMMEDIATE MAINTENANCE - 17

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SMEG

Model : LZ791A2

Category : Sink