VSGX860MN - Sink SMEG - Free user manual and instructions
Find the device manual for free VSGX860MN SMEG in PDF.
| Brand | Smeg |
| Model | VSGX860MN |
| Product type | Kitchen sink |
| Material | Composite granite |
| Available colors | Light and dark |
| Installation | Standard or under-mount |
| Cleaning tips | Use a soft non-abrasive sponge and regular dish soap, rinse and dry with a microfiber cloth |
| Stubborn stains (light) | Bleach and warm water solution (3/4 - 1/4), let sit 8 hours, rinse thoroughly |
| Stubborn stains (dark) | Soft non-abrasive sponge and dish soap in circular motions, rinse with warm water |
| Limescale stains | Descaling product diluted in warm water, let sit a few minutes, rinse |
| Usage precautions | Do not use alkaline or harsh detergents, nor abrasive sponges or steel wool |
| Surface protection | Use a cutting board, avoid placing hot objects directly |
| Boiling liquids | Turn on cold water and have at least 1 cm of water at the bottom before pouring |
| Anti-limescale treatment | At least once per period, fill with warm water with liquid detergent or tablet, let sit 5-6 hours |
| Safety | Packaging (plastic bags, polystyrene) should not be left within reach of children |
| Professional installation | Have it done by qualified personnel according to current standards |
| Warranty | Failure to follow cleaning and maintenance instructions may void the standard warranty |
| Spare parts | Available from the manufacturer |
Frequently Asked Questions - VSGX860MN SMEG
User questions about VSGX860MN SMEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Sink in PDF format for free! Find your manual VSGX860MN - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VSGX860MN by SMEG.
USER MANUAL VSGX860MN SMEG
Before fitting the sink, it is advisable to wash it using standard dish detergent and a soft sponge to remove any manufacturing residues.
Rinse the sink thoroughly and dry it using a microfibre cloth.

STANDARD INSTALLATION






UNDERMOUNT INSTALLATION







The packaging materials (plastic bags, expanded polystyrene, etc.) must not be left within reach of children as they are a potential hazard.

Installation and support should be undertaken by qualified individuals, in accordance with the applicable legal requirements.
The silicone is not included with the product.
The sink shown in this guide is for illustrative purposes only.

1. ROUTINE MAINTENANCE
Cleaning your Smeg product is quick and simple. Even though the non-porous surface prevents liquids penetrating into the material, it is preferable to remove them immediately using a soft, non-abrasive sponge and standard dish detergent. You should then rinse the surface and dry it carefully using a microfibre cloth.

2. NON-ROUTINE MAINTENANCE
Cleaning stubborn stains is not difficult: all you need to do is choose the right product and use it correctly.

For stubborn stains on LIGHT-COLOURED products, you can use a solution of bleach and warm water (3/4 to 1/4), leaving it to act for eight hours (we recommend that this cleaning be performed during the night). Afterwards, rinse thoroughly and dry the entire surface carefully using a microfibre cloth. If the stains remain, the operation can be repeated one or two more times.

For stubborn stains on DARK-COLOURED products, you can remove them directly with a soft, non-abrasive sponge and standard dish detergent, using small circular movements. When finished, rinse using warm water and carefully dry the entire surface using a microfibre cloth. If the stains remain, the operation can be repeated one or two more times.

To remove limescale stains, we recommend the use of a non-corrosive descaling product diluted with warm water. Distribute the solution uniformly over the entire surface of the product. Clean with a soft, non-abrasive sponge using small circular movements and leave the product to act for several minutes (follow the instructions and conditions for use on the product label). When finished, rinse using warm water and dry carefully using a microfibre cloth.
Failure to follow the cleaning and maintenance instructions stated in this manual may invalidate the standard warranty provided by the manufacturer.

To ensure that there is no change to the characteristics of the product, we recommend that users observe the following precautions:
- Dry the surface of the product every day to avoid prolonged exposure to water that could lead to the build-up of limescale or stubborn stains.
- Do not use detergents that contain alkaline substances and aggressive liquids (such as ammonia, caustic soda or drain cleaners).
- Do not remove traces of dirt using steel scourers or abrasive sponges that could damage the surface.
- Do not cut or chop directly on the surface of the product because this could cause irreparable scratches (always use chopping boards).
- Avoid accidental knocks that could cause irreparable micro-damage.
- Do not place hot cookware, pans or coffee makers directly on the sink surface: stains from discolouration and/or damage could form in areas where hot items are placed.
- Avoid pouring boiling liquids directly into the sink without first turning on the cold tap and filling the sink with at least 1 cm of water, as this could damage the product.
- To prevent the build-up of limescale, it is recommended that a descaling treatment be completed at least once a week. This is recommended in particular for dark-coloured sinks. Fill the tub with warm water and add two spoonfuls of liquid or powder dishwasher detergent or a dishwasher tab. Leave the solution for 5/6 hours. Rinse thoroughly and dry carefully.



Do not put pans or coffee makers that have just been taken off the heat (which sometimes reach 500°C) directly into the sink.

Do not place pans, frying pans, or coffee makers that have just been removed from the heat (which in some cases can reach temperatures of 500°C) directly into the sink.

The sink is not dishwasher safe.
The sink shown in this manual is for illustrative purposes only.

1. DAILY CLEANING
Smeg products are designed to be simple and easy to use. To prevent any damage to the surface that could compromise the integrity of the material, it is advisable to clean the sink immediately after use, using a soft sponge and a mild detergent, then rinse the surface and dry thoroughly with a microfiber cloth.

2. PERIODIC MAINTENANCE
Cleaning the sink is not difficult: simply choose the right product and apply it correctly.

In case of stubborn stains on light-colored surfaces, you can use a solution of bleach and hot water (3/4 water to 1/4 bleach), leaving it on the surface for about 8 hours (it is advisable to perform this procedure outdoors). After this, the entire surface must be thoroughly rinsed and carefully dried with a microfiber cloth. If stains persist, the procedure can be repeated 1 or 2 times.

In case of stubborn stains on dark-colored surfaces, you can remove them with a soft sponge and a mild detergent for dishes, applying it with gentle circular motions. Then rinse well with hot water and dry the entire surface thoroughly with a microfiber cloth. If stains persist, the procedure can be repeated 1 or 2 times.

To prevent limescale build-up, it is recommended to use an anti-limescale product that prevents the formation of limescale and effectively softens hard water. Spread the solution over the entire surface with a soft sponge using gentle circular motions, and leave it on the surface for a few minutes (follow the instructions and dosage indicated on the product label). Finally, rinse with hot water and dry thoroughly with a microfiber cloth.
Failure to follow the instructions specified in this manual may result in loss of warranty provided by the manufacturer.
PRECAUTIONS AND RECOMMENDATIONS

To preserve the characteristics of the product, we recommend following the precautions below:
- Wipe the surface of the product daily, avoiding contact with splashes of water and dirt, which can lead to the formation of stains or scratches.
Do not use abrasive agents, aggressive chemicals, or acids (e.g., ammonia, caustic soda, pipe cleaners).
Do not rub dirt with steel or abrasive sponges, which can damage the surface.
Do not place or drag anything directly on the surface of the product, as this may irreparably damage it (use a cutting board for food preparation).
- Avoid sharp impacts, which can cause irreparable micro-cracks.
Do not place hot pots, kettles, or pans directly on the surface of the kitchen sink. This can cause the formation of stains and damage the surface.
- Avoid pouring boiling water directly into the sink without first opening the cold water tap and filling it at least 1 cm, as this can damage the sink.
- To prevent the formation of limescale, we recommend cleaning the sink at least once a week. This procedure is especially recommended for dark-colored sinks. Fill the sink with warm water and add a few drops of mild detergent or powder for dishwashers or a tablet. Leave the solution for 5/6 hours. Then rinse thoroughly and dry carefully.



Do not place hot pans, skillets, or kettles directly on the kitchen sink surface (in some cases they can reach temperatures of 500°C).


















Smeg S.p.A
Via Leonardo da Vinci, 4
42016 Guastalla (RE), ITALY
smeg@smeg.it
smeg