Zermatt - Air purifier Sonnenkönig - Free user manual and instructions

Product type	Air purifier with humidifier
Brand	Sonnenkönig
Model	Zermatt
Power supply	220-240 V, 50 Hz (power cable included)
Power consumption	Approximately 55 W (max)
Coverage area	Up to 30 m² (estimate)
Filter type	Pre-filter, HEPA filter, activated carbon filter, water filter
Main functions	Ionizer, UV sterilization, humidification, automatic mode, sleep mode, timer (1-12 h), WiFi, parental control, light sensor
Fan speed	8 adjustable speeds + automatic mode
Air quality indicator	PM2.5 with color code (green, blue, yellow, red)
Water tank	Maximum capacity: 1 liter
Remote control	Yes (with CR2032 battery)
WiFi	Smart Remote King app (iOS/Android)
Noise level	Approximately 25-50 dB (estimate depending on speed)
Dimensions (W x D x H)	Approximately 40 x 20 x 60 cm (estimate)
Weight	Approximately 6 kg (estimate)
Maintenance and cleaning	External cleaning with damp cloth; vacuum or wash the pre-filter; replace HEPA and carbon filter every 2 months; clean the ionizer and sensor with a cotton swab
Safety	Child lock, automatic shutdown if water tank removed, moisture protection (indoor use only)
Spare parts and repairability	Replacement filters available; repairs by authorized service
Warranty	24 months from date of purchase

Frequently Asked Questions - Zermatt Sonnenkönig

How to change the filters of the Zermatt purifier?

Open the front cover, remove the old filters. Insert the new HEPA filter with the tab facing forward, then the activated carbon filter in the same way, and finally the pre-filter. Replace the cover. After replacement, press the filter reset button for 5 seconds.

How to connect the purifier to WiFi?

Download the Smart Remote King app on your smartphone. Create an account, connect your phone to the same WiFi network as the device. Select 'Add Device' and follow the instructions in the app.

What does error code E0 or E1 mean?

Error codes E0 and E1 indicate an internal malfunction. Contact the manufacturer or an authorized after-sales service for repair.

How to clean the ionizer and sensor?

Turn off and unplug the device. For the ionizer, open the cover on the top and clean the poles with a cotton swab. For the sensor, remove the cover on the left side of the handle and clean it with a cotton swab.

How to use the water tank?

Remove the tank, take off the packaging of the water filter, insert it into the holder, remove the silicone cap, fill with a maximum of 1 liter of water, put the cap back on and replace the tank. The purifier will automatically humidify the air.

How to activate sleep mode?

Press the 'SLEEP' button. After 5 seconds, the device switches to the lowest speed and the screen turns off. To reactivate it, press the button again.

How to lock the buttons for children?

Press the child lock button. All buttons will be disabled. To unlock, press and hold the button for 3 seconds.

How to set the timer?

Press the timer button to set the operating time between 1 and 12 hours. The device will automatically turn off after the set time.

How to replace the remote control battery?

Turn the cover on the back of the remote control counter-clockwise, remove the old battery, insert a new CR2032 battery, then close the cover.

What to do if the device does not turn on?

Check that the power cord is plugged in, the socket is working, and the front cover is properly closed. Make sure the child lock is not activated. If the problem persists, contact customer service.

USER MANUAL Zermatt Sonnenkönig

Exterior view of a modern white industrial air purifier with digital display (no visible text or symbols)

INDEX

Simple line drawing of a mechanical device with an arrow indicating force or movement (no text or symbols)

1

2

Line drawing of a rectangular electronic device with a flat top and side compartments (no text or symbols)

3

4

Line drawing of a faucet above a water dispenser with a drop symbol (no text or labels)

5

6

Line drawing of a portable air conditioner unit with a side arm and a wall-mounted door (no text or symbols)

7

SMART REMOTE KING

Mobile phone status bar screenshot showing menu options and control buttons

Indoor Temp245°C 23°C OK Cancel Set wing ON

White industrial air purifier with control panel and digital display (no visible text or symbols)

Alle 2 Wochen

Isometric line drawing of a rectangular panel with horizontal slats and a small tab (no text or symbols)

Isometric view of a honeycomb panel with hexagonal lattice pattern (no text or symbols)

Pure electrical circuit lines without any symbols

Jeden Monat

Illustration of a mechanical device with a lid and base, enclosed in a dashed circular border (no text or symbols)

nigung

Technical line drawing of a mechanical component with an inset diagram showing internal components and a tool (no text or symbols present)

Exterior view of a modern white industrial air purifier with digital display (no visible text or symbols)

INDEX

Simple line drawing of a mechanical device with an arrow indicating force or movement (no text or symbols)

1

2

Line drawing of a rectangular electronic device with a flat top and side compartments (no text or symbols)

3

4

Line drawing of a faucet above a water-filled appliance (no text or symbols)

5

6

Simple line drawing of a portable device with a handle and arrow indicating left motion (no text or symbols)

7

SMART REMOTE KING

White industrial air purifier with control panel and digital display (no visible text or symbols)

Chaque 2 semaines

Isometric line drawing of a rectangular panel with horizontal slats and a small tab on top (no text or symbols)

Diagram of a honeycomb panel with hexagonal lattice pattern (no text or symbols)

Chaque 2 mois

Pure electrical circuit lines without any symbols

Chaque mois

Illustration of a printer or printer with a lid, enclosed in a dashed circular border (no text or symbols)

Cross-sectional diagram of a mechanical or electrical component with no visible text or symbols

Technical diagram showing a mechanical assembly with an arrow pointing to a component and a close-up of a device inside a dashed circle (no text or symbols)

Modifications techniques

Exterior view of a modern white industrial water purifier with digital display (no visible text or symbols)

IT

INDEX

PM2.5 i 8888 E

3 Operazione

Simple line drawing of a mechanical device with an arrow indicating force or movement (no text or symbols)

1

2

Line drawing of a rectangular electronic device with a flat top and side compartments (no text or symbols)

3

4

Line drawing of a faucet above a water dispenser with a drop symbol (no text or labels)

5

6

Simple line drawing of a portable air conditioner unit with a side arm and a handle (no text or symbols)

7

SMART REMOTE KING

White industrial air purifier with control panel and digital display (no visible text or symbols)

Alle 2 Wochen

Isometric line drawing of a rectangular panel with horizontal slats and a small tab (no text or symbols)

Ogni 2 mesi

Isometric view of a honeycomb panel with hexagonal lattice pattern (no text or symbols)

Ogni 2 mesi

Pure electrical circuit lines without any symbols

Ogni mese

Illustration of a printer or printer with a lid, enclosed in a dashed circular border (no text or symbols)

Pulizia

Technical diagram showing a vertical component with an arrow pointing to a circular inset view of a device (no text or symbols present)

Exterior view of a modern white industrial air purifier with digital display (no visible text or symbols)

NL

INDEX

PM2.5 i 8888 E

3 Werking

1. In-/uitschakelen

Line drawing of a hand pressing down on a small mechanical device (no text or symbols)

1

2

Line drawing of a simple electrical cabinet or enclosure unit (no text or symbols)

3

4

Line drawing of a faucet above a water-filled appliance (no text or symbols)

5

6

Line drawing of a portable air conditioner unit with a side arm and handle (no text or symbols)

7

graph LR
    A["−"] --> B["+ CR2025"]

SMART REMOTE KING

Indoor Temp2/FC 23°C Hot Swing Night ON

White industrial air purifier with control panel and digital display (no visible text or symbols)

Elke 2 weken

Isometric line drawing of a rectangular panel with horizontal slats and a small tab on top (no text or symbols)

Isometric view of a honeycomb panel with hexagonal lattice pattern (no text or symbols)

Pure electrical circuit lines without any symbols

Illustration of a printer or printer with a lid, enclosed in a dashed circular border (no text or symbols)

nigung

Technical diagram showing a device with a close-up view of its internal components (no text or symbols present)

Landline 14 Cent/Minute

Mobiel network 42 Cent/Minute

ZERMATT

AIR CLEANER

Manual

Exterior view of a modern white industrial air purifier with digital display (no visible text or symbols)

EN

INDEX

1 Safety instructions ....59
2 Overview 60
3 Operation 61
4 Functions....62
5 Filter 63
6 WIFI setup....64
7 Cleaning 66
8 Troubleshooting....67
9 Warranty/Disposal/Technical change....68

1 Safety instructions

• Only use the air purifier as described in this manual.
• Before plugging in, ensure that the voltage is equal to that specified on the product data plate (AC220-240V/50Hz).
• The purifier must be positioned on a flat, stable surface. To avoid risk of electric shock, short circuit and fire, do not use the appliance if the power cord is damaged or if the electrical socket has worked loose.
• To disconnect the purifier, push the switch to OFF and remove the plug from the socket. When removing the plug, grasp the plug and not the cord. Do not use extensions.
• Do not damage the cord by winding it around sharp corners, twisting it, resting heavy objects on it, positioning it close to hot surfaces or allowing it to hang from the edge of a table.
• Do not make changes to the purifier. If the purifier needs to be repaired or a damaged power cord requires replacement, contact an authorised service centre.
• Before cleaning the purifier or removing the collector, turn the appliance off and unplug.
• Never touch the plug or purifier with wet hands.
• Do not operate the purifier in the presence of mosquito sprays.
• The purifier is not fitted with protection against humidity. As such, only use inside and away from showers, baths and washbasins or similar such places.
• Not suitable for outdoor use.
• Do not immerse in water or other liquids.
• Do not operate near a heater.
• Do not use near flammable gases such as natural gas or propane.
• Do not use near flames, kitchen appliances or heating appliances or, more generally, a hot surface.
• To avoid risk of accidents, keep the purifier away from children and the disabled.
• Do not put fingers and/or any objects in the air inlet/outlet grilles.
• Do not place objects on top of the appliance.
• When not in use for long periods, remove the plug from the socket.

Do not place the unit on water sensitive surfaces to prevent damage from leaking liquids.

2 Overview

EN

1 2 3 4 5 6

1. Handle
2. Air outlet
3. Control Panel
4. Air inlet and filter
5. Sensor
6. Watertank
7. Remote

7 AUGO TOMATO - BUTTER MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI MINI

BA C D E F G H (A) Filter control lamp (B) Parental control (C) Sleep mode (D) Wifi indicator (E) Air velocity (F) Auto mode (G) Timer (H) ON / OFF (i) Quality display (colour indicator) PM2.5 i 8:11:00 E

3 Operation

1. ON / OFF

Press the on/off switch to switch the unit on and off. When the unit is switched on, it switches to automatic mode

2. Timer

The working time of the device can be set by the timer button. Set the time to 1 - 12 h.

3. Air speed

Press the "SLEEP" button to put the device into sleep mode. After 5 seconds the unit will switch to the lowest ventilation level and the display will turn off. Press the button again to reactivate the unit.

4. Child-Lock

When the parental control button is pressed, the key function of the device goes into the locked state and all keys cannot be operated. Long Press this button for 3 seconds to cancel the lock.

5. Filter / WIFI-Reset

This unit is equipped with a time-controlled fi lter change function which fl as- hes until the request to change the fi lter after 1500 hours. Press and hold the button for 5 seconds to clear the fi lter display and reset the function.

If you want to reset the WIFI setting of the device, switch the device to standby mode with the OFF button and press the reset button for 5 seconds. The WIFI indicator should now fl ash and you can set up the device again.

4 Functions

lonizer

The ionizer binds micro-particles by means of electric charge and catches them. You can switch this function off with the remote control

Sterilizer

The UV sterilization cleans the circulating air with UV rays. You can switch this function off using the remote control.

Light-Sensor

In auto mode, the device automatically measures the surrounding light conditions and automatically switches to sleep mode when it is dark for 2 minutes. After the unit detects light again for 3 minutes, it reactivates itself from sleep mode.

Waterfi lter

When water is added to the water tank, the machine automatically generates steam. The humidifi cation eff ect depends on the wind speed, and it works better when the machine is operating at a higher level. When the water level becomes low, the indicator light fl ashes while the machine continues to operate nor- mally. When the water tank is removed, the indicator light remains lit and the machine stops working.

Simple line drawing of a mechanical device with an arrow indicating force or movement (no text or symbols)

1

2

Line drawing of a rectangular electronic device with a flat top and side compartments (no text or symbols)

3

4

Line drawing of a faucet above a water-filled appliance (no text or symbols)

5

6

Simple line drawing of a portable device with a handle and arrow indicating left motion (no text or symbols)

7

Remove the water tank from the appliance Remove the packaging from the water filter Insert the filter in the holder of the water tank Remove the silicone cover Fill the water tank with max. 1 litre water Place the silicone cover on the tank Slide the water tank back into the unit

5 Filter

Open the front cover as shown in the diagram and remove the packaging from the filters.

Insert the HEPA filter with the tab facing the front.

Insert the activated carbon filter with the tab facing forward

Insert the pre-fi lter and make sure that the fi lter is flush with the unit.

Replace the front cover.

BATTERY CHANGE

• Turn the cover on the back of the remote control counterclockwise and remove the cover.
• Remove the old battery.
• Insert the new battery and the cover.
• Close the cover by turning it clockwise.

graph LR
    A["−"] --> B["+"]
    style A fill:#fff,stroke:#000
    style B fill:#fff,stroke:#000

Please remove the battery if it will not be used for a long time.

6 WIFI setup

Please proceed as follows to remotely control your device via WIFI.

SMART REMOTE KING

1. Start the Play Store (Android) or App Store (Apple) on your smartphone and search for the «SMART REMOTE KING» from SONNENKÖNIG. Download the app.
2. The app will be installed on your smartphone.

1. Enter your mobile phone number, the country code is already entered.

1. You will receive the so-called «confi rma-tion code» by SMS. Enter the code and the password you have chosen within 60 seconds and select «Confi rm» to complete the regis-tration.

MAKE SURE THAT THE SMARTPHONE YOU WANT TO USE TO CONTROL YOUR DEVICE AND THE DEVICE ARE CONNECTED TO THE SAME WIRELESS MODEM.

1. Enter the correct WIFI password.

1. Select «Close» when the connection has been successfully established. If no connection has been established, follow the instructions on the app.

Mobile Swing Theme Start Settings CN

1. The operation screen of the machine appears.

Indoor Temp/4°C 23°C Noise Cooling Warm Hot Spring DN

1. Select «...» at the top right of the operation screen and then select «Change device name» to give your device a logical name so that you know which device it is.
   Your device and smartphone are now set up for remote control via WIFI.

EN

TURN OF THE DEVICE AND REMOVE IT FROM THE POWER SUPPLY BEFORE CLEANING / MAINTENANCE

White industrial air purifier with control panel and digital display (no visible text or symbols)

Every 2 Weeks

If necessary, clean the device with a damp cloth.

Do not use caustic or abrasive cleaning agents!

Isometric line drawing of a rectangular panel with horizontal slats and a small tab (no text or symbols)

HEPA-FilterDevice Activated carbon filter Pre Filter

Every 2 months

This fi lter cannot be cleaned and must be replaced

After removal, place the HEPA and activated carbon filter in a well-ventilated place, as previously absorbed particles or bacteria could now escape.

Isometric view of a honeycomb panel with hexagonal lattice pattern (no text or symbols)

Every 2 months

Thoroughly vacuum the front of the fi lter with a vacuum clea- ner.

Pure electrical circuit lines without any symbols

Every month

Vacuum the fi lter thoroughly with a vacuum cleaner or wash it under run- ning water and let it dry.

Ionizer - Cleaning

Illustration of a printer or printer with a cover, shown in a simple line drawing style (no text or symbols)

Cross-sectional diagram of a mechanical or electrical component with no visible text or symbols

The poles of the ionizer are located under the ventilation grille of the air outlet and can be cleaned with a cotton swab. To do this, open the cover on the upper side:

Sensor - Cleaning

Technical line drawing of a mechanical assembly with an inset diagram showing a component layout (no text or symbols)

The sensor is located on the left side of the handle under the cover provided for this purpose. It can also be cleaned with a cotton swab after removing the cover.

8 Troubleshooting

Problem description Solution
Device cannot be powered on. Plug in	the power cord.
	Check if the front-cover is correctly installed.
No reaction after pressing any button.	Check the filter change function and change the filter if necessary.
	Check if the child-lock is active.
The device spreads an unpleasant smell.	Check if the plastic wrap of the filters were removed.
	Check that the filters have been inserted in the correct order.
The air quality is not improving. Clean	or replace the filters and reset the filter warning.
The device switches itself off again after switching on.	If you start the device in the dark, it automatically goes into sleep mode. Switch off the auto mode.
The device displays the error code E0 or E1	Contact the manufacturer and take the device for repair.

EN

9 Warranty/Disposal/Technical change

EN

Warranty

The Products are controlled just before delivery. If despite a lack of your product, try trustfully your seller. Please bring your receipt, as this is to be submitted for each warranty. The guarantee period is 24 months from date of purchase.

Disposal

The device must be disposed of properly. The device can be distributed free of charge for disposal at each dealer.

Technical changes

Reserving technical changes in technology and design

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Please make sure to place the device on a suitable and waterproof surfaces, so that spilled liquids can not cause harm.

CE Declaration of Conformity

This device complies with the following standards

EMC EN 55014-1:2017

EN 55014-2:2019

EN 61000-3-2:2014

EN 61000-3-3:2013

LVD EN 60335-1:2012+A11:2014+A13:2017

EN 60335-2-65:2003+A1:2008+A11:2012

EN 62233:2008

LVD 2014/35/EU

EMC 2014/30/EU

RoHS 2015/863/EU

DISPOSAL INSTRUCTIONS FOR THE ELECTRICAL PART OF THE PRODUCT

In accordance with Article 26 of the Decree-Law of 31 March 2015 implementing Directive 2012/19/EC and the Law of 4 March 2014 implementing Directive 2015/863/EC on the reduction of the use of hazardous substances in electrical and electronic equipment and on waste management.

The crossed-out dustbin symbol on the machine or packaging indicates that the waste generated at the end of its useful life must be collected separately from other waste. The user must therefore take the device to the appropriate collection points at the end of its service life. Sort electronic and electrical waste or send the purchase of new, equivalent devices back to the dealer in a one-to-one process. L'adeguata separate collection for subsequent commissioning of the equipment to be recycled, treatment and environmentally sound disposal, helps to avoid possible adverse effects on the environment and health and promote the reuse and/or recycling of the materials to which they belong. composed the equipment. Misuse of this product by the user will result in the application of the administrative penalties provided for in the applicable legislation. Batteries contained in the device must be disposed of separately in the appropriate containers for the collection of used batteries.

DISPOSAL OF BATTERIES AND ACCUMULATORS

In accordance with Legislative Decree 188 of 20 November 2008 implementing Directive 2006/66/EC on batteries, accumulators and related waste, the symbol of the crossed-out waste bin on the battery indicates that it is prohibited to dispose of used batteries in household waste.

Batteries and batteries contain substances that are highly polluting for the environment. The user is obliged to dispose of used batteries at collection points in the municipality or in appropriate containers. The service is free. In this way, legal requirements will be respected and the environment will be protected. The symbols identifying hazardous materials that may be present in batteries and accumulators are as follows: Hg= Mercury, Cd= Cadmium, Pb= Lead.

Notizen | Notes | Nota

Company

Armin Schmid

Olensbachstrasse 9-15

CH-9631 Ulisbach

Tel. Int. [phone]

Tel. Nat. 0848870850

www.sonnenkoenig.ch

Company

Armin Schmid