CEG 3192 B - Coffee machine GRUNDIG - Free user manual and instructions

USER MANUAL CEG 3192 B GRUNDIG

Fully Automatic Espresso Machine

User Manual

Simple line drawing of a steaming coffee cup on a saucer (no text or symbols)

CEG 3192 B

EN - DE - FR - TR - ES - CS - IT - PL - RO - SK - RU - NL - AR

CONTENTS

ENGLISH 3-22

DEUTSCH	23-44
FRANÇAIS	45-65
TÜRKÇE	66-89
ESPAÑOL 90-112
ČESKY	113-132
ITALIANO	133-154
POLSKI 155-177
ROMÂNĂ	178-200
SLOVENSKÝ	201-220
РУССКИЙ 221-244
NEDERLANDS 245-265

Please read this user manual first!

Dear Customers,

Thank you for selecting an Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use. If you handover the product to someone else, give the user manual as well. Follow all warnings and information in the user manual.

Meanings of the symbols

Following symbols are used in the various section of this manual:

Important information or useful hints about usage.

DANGER: Warning for hazardous situations with regard to life and property.

WARNING: Warning indicates a potentially dangerous situation.

CAUTION: Warning indicates potential material damage.

Materials are intended to be in contact with food.

This product has been produced in environmentally-friendly, state-of-the-art facilities.

1 Important instructions for safety and environment

This section includes the safety instructions that will help providing protection against personal injury and material loss risks. Failure to follow these instructions invalidates the granted warranty.

1.1 Danger of electric current

Danger to life by electric current!

Contact with live wires or components could lead to serious injury or even death!

Observe the following safety precautions to avoid electric shocks:

- Do not use it if the power cable or the appliance itself is damaged. Contact an authorised service.

- Do not open the housing of the coffee machine. Danger of electric shock if live connections are touched and/or the electrical and mechanical configuration is changed.

- Before cleaning the bean container, pull the mains plug of the appliance out of the socket. Danger from rotating coffee mill!

1.2 Danger of burning or scalding

Parts of the coffee machine can become very hot during operation! Dispensed drinks and escaping steam are very hot!

Observe the following safety precautions to avoid burning/scalding yourself and/or others:

- Do not touch either of the metal sleeves on both coffee spouts.

- Avoid direct contact of the skin with escaping steam or hot rinsing, cleaning and descaling water.

1 Important instructions for safety and environment

1.3 Fundamental safety precautions

Observe the following safety precautions to ensure safe handling of the coffee machine:

• Never play with packaging material. Risk of suffocation. Keep all the packaging materials away from children.
• Inspect the coffee machine for visible signs of damage before use. Do not use a damaged coffee machine. Contact an authorised service.
• If the connecting cable is damaged, it should only be replaced by a service agent recommended by the manufacturer in order to prevent any danger! Please contact the manufacturer or his customer service.
  •Repairs to the coffee machine must only be carried out by an authorised specialist or by the works customer service. Unqualified repairs can lead to considerable danger for the user. They will also void the warranty.

• Repairs to the coffee machine during the warranty period may only be carried out by service centres authorised by the manufacturer, otherwise the warranty will become void in the event of subsequent damage.
•Defective parts may only be replaced with original spare parts. Only original spare parts guarantee that the safety requirements are met.
•This appliance can be used by children from the age of 8 up as well as by persons with reduced physical, sensory or mental abilities or with lacking experience and/or knowledge, if these persons are supervised or have been instructed how to use the appliance in a safe way and have understood the hazards which could arise from using it. Children must not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.

1 Important instructions for safety and environment

•This appliance is intended to be used in household and similar applications such as:
- staff kitchen areas in shops, offices and other working environments,
- farm houses,
- by clients in hotels, motels and other residential type environments,
- bed and breakfast type environments.
- Protect the coffee machine against the effects of weather such as rain, frost and direct sunlight. Do not use the coffee machine outdoors.
- Never immerse the coffee machine itself, the mains cable or the mains plug into water or other liquids.
- Do not clean the coffee machine or accessories in a dish washer.
- Do not pour any other liquids apart from water or place foodstuffs into the water tank.

- Do not fill the water tank beyond the maximum mark (lower edge of the filling hole).

- Only operate the machine when the waste container, drip tray and the cup grate are fitted.

- Do not pull the cable to remove the plug from the mains socket or touch with wet hands.

- Do not hold the coffee machine with the mains cable.

- Keep the appliance and its cord out of reach of children aged less than 8 years.

•The appliance can only be used to prepare coffee.

•Children should be super vised to ensure that they do not play with the appliance.

- Unplug the appliance before each cleaning and when the appliance is not in use.

1 Important instructions for safety and environment

• Place the appliance in a way so that the plug is always accessible.
  •Always use the appliance on a stable, flat, clean dry, and non-slip surface.
  •Appliance is not built-in coffee-makers and is not designed use in cabinet. The coffee maker shall not be place in a cabinet when in use.
• Do not squeeze or bend the power cord and do not rub it on sharp edges in order to prevent any damage. Keep the power cord away from hot surfaces and naked flame.
• Your mains power supply should comply with the information supplied on the rating plate of the appliance.
• Use the appliance with a grounded outlet only.
• Do not use the appliance with an extension cord.

- Do not touch the appliance or its plug with wet or damp hands when the appliance is plugged in.

1.4 Intended use

The fully automatic coffee machine Beko is intended for use in homes and similar applications, for instance in staff kitchens, shops, offices and similar areas or by customers in bed & breakfast, hotels, motels and other living accommodation. This coffee machine is not intended for commercial use. The machine is only intended for preparing coffee and heating milk and water. Any other use other than previously stated is considered as improper use.

Danger resulting from improper use! If not used for its intended purpose or used in any other way, the coffee machine may be or become a source of danger.

WARNING: Therefore, the coffee machine may only be used for its intended purpose.

WARNING: Observe the procedures described in this user manual.

No claims of any kind will be accepted for damage or injury resulting from use of the coffee machine for other than its intended purpose.

The risk has to be borne solely by the machine owner.

1 Important instructions for safety and environment

1.5 Limitation of liability

All technical information, data and instructions on installation, operation and maintenance of the coffee machine contained in these operating instructions represent the current status at the time of printing and are based on the best possible knowledge gained by experience and knowhow. No claims can be derived from the information, illustrations and descriptions in this user manual. The manufacturer assumes no liability for damage or injury resulting from failure to observe the user manual, use for other than the intended purpose, unprofessional repairs, unauthorised modifications or use of non-approved spare parts.

1.6 Compliance with the WEEE Directive and Disposing of the Waste Product:

This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).

This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life. Used device must be returned to official collection point for recycling of electrical and electronic devices. To find these collection systems please contact to your local authorities or retailer where the product was purchased. Each household performs important role in recovering and recycling of old appliance. Appropriate disposal of used appliance helps prevent potential negative consequences for the environment and human health.

1.7 Compliance with RoHS Directive

The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

1.8 Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

2 Your Fully Automatic Coffee Machine

Exploded view diagram of a device with numbered parts for identification

1. Coffee Bean Container Cover
2. Coffee Bean Container
3. Control Panel
4. On/Off button
5. Steam Nozzle
6. Nozzle cover
7. Adjustable coffee spout
8. Metal tube
9. Coffee Grounds Container
10. Internal Drip Tray
11. External Drip Tray
12. Cleanness brush
13. Service Door
14. Brewer
15. Power cord
16. Water Tank
17. Cleanness needle

Technical data

Power supply:

220-240 V\~, 50-60 Hz

Power: 1350 W

Technical and design modifications reserved.

All declared values on the product and on the printed leaflets are picked up after laboratory measurements performed according to related standarts. These values may differ upon usage and ambient conditions.

3 Display

3.1 Control Panel

	Flashing: Low water level/ Water tank missing
	Not enough coffee beans
	Steady warning light: The coffee grounds container is fullFlashing light: The internal Drip Tray/coffee grounds container is missing
	Steady warning light: Brewer is missing/ installed improperlyFlashing light: Service door is opened / installed improperly
	Steady warning light: Requires descalingFlashing light: Descaling is under way
	Empty System Function is running
	Power ON/OFF Button
	Steam Button
	Hot Water Button
	Strong Espresso Button (25-40 ml coffee with one press on button)
	Mild Espresso Button (51-69 ml coffee with one press on button)

4 Preparation

4.1 Installation

Remove any protective films, stickers and any other packing material on the appliance.

150mm 150mm 150mm 150mm 150mm

Choose a safe and stable surface with an easily reachable power supply and allow minimum distance from the sides of the machines.

Technical line drawing of a device with an open base and internal components, showing no text or symbols.

Insert the external drip tray. Make sure it is inserted correctly.

Diagram showing a cable inserted into a device with an attached port (no text or symbols visible)

Unwind and straighten the power cord and insert the plug into the socket located on the back of the machine. Insert the other end of the power cord into a wall socket with suitable power voltage.

4.2 Filling the water tank

About the protect program: If the water tank is not fully placed into the machine, a protection mode will be activated in 15 seconds during brewing process. Hot water button will lights on control panel.

1. Make sure that the water tank is fully inserted into the machine.
2. Press the hot water button. After the hot water is dispensed, the machine will be in standby condition.

WARNING: When is flashing, the water tank is at a low water level and requires filling.

Technical line drawing of a mechanical device casing with mounting base and internal components (no text or symbols)

Lift the water tank by using the lid as the handle.

Technical line drawing of a mechanical device with an upward arrow indicating motion (no text or symbols)

Take the water tank out. Rinse the water tank with fresh water

Line drawing of a water tap with a handle and outlet (no text or symbols)

and then fill the tank to the Max level and place it back into the machine. Make sure it is fully inserted.

4 Preparation

To prevent overflow of water from the water tank, do not add water directly into the appliance with another container.

WARNING: Never fill the water tank with warm or hot water, sparkling water or any other liquid which might damage the water tank and the machine.

Technical line drawing of a mechanical device with an arrow indicating assembly or transformation (no text or symbols present)

Place the water tank back by using the lid as the handle.

Line drawing of a mechanical device with a handle and mounting base, showing no text or symbols

Close the water tank by using the lid.

5 Operation

5.1 Grinding Adjustment

You can adjust the grinder to suit the roast of your coffee by turning the adjuster knob in the bean container:

Diagram of a refrigerator with a circular dial and directional arrows indicating rotation (no text or symbols)

WARNING: Never adjust the grinder when it is in use.

The dots on the adjuster knob indicate the fineness of the grind.

5.2 Filling the bean container

When it is flashing, the appliance needs to be filled with coffee beans.

Technical line drawing of a mechanical device with no visible text or symbols

Line drawing of a mechanical device with a bucket pouring granular material from its top (no text or symbols)

Technical line drawing of a device casing with an open lid and internal components, showing no text or symbols.

Remove the bean container lid. Slowly pour in the coffee beans. Place the container lid back.

WARNING: Fill the coffee bean container only with coffee beans. Ground coffee, instant coffee, caramelized coffee or any other objects may damage the machine.

5 Operation

Press the hot water button to clean the inside of the coffee maker before first use.

5.3 Making Your Coffee

Line drawing of a device casing with a circular button labeled 'Power' and no visible text or symbols

Switch on the appliance by pressing the power on/off button. The appliance turns on in standby mode and will be ready for use by flowing some hot water from coffee spout.

Line drawing of a modern coffee maker with a cup and tray (no text or symbols)

Place a cup under the coffee spout and adjust the height of the spout the fit the cup.

Line drawing of a coffee maker with a cup and a speech bubble indicating coffee (no text or symbols)

Press the espresso button and the light will turn on, with the illumination lights indicating that the appliance is preparing a cup of coffee. When the appliance is back on standby, the coffee is ready to serve.

Switch off the appliance by pressing the power on/off button.

Press the strong espresso or mild espresso button depending on the taste of coffee you'd prefer.

Press the hot water button to clean the inside of the coffee maker before first use.

The Appliance is equipped with auto-shut off. Depending on the mode you have selected, the appliance will have different auto-shut off timing.

5 Operation

5.4 Adjusting The Volume of Your Coffee/Hot Water

You can save your desired volume of coffee for both strong espresso and mild espresso and also the hot water from 25ml to 250ml.

2x beep!

When making your coffee (either strong espresso or mild espresso) press and hold the button you selected. The appliance will continue to make the cup of coffee while holding on the button.

When the volume of coffee meets your desired volume, release the button. If you hear two beeps, that indicates the machine has saved the volume of coffee that you prefer.

To reset to the default/factory settings;

In order to reset to the default settings of coffee and hot water volume selection recorded in memory, it is necessary to reset to the factory settings.

1. When the device is off, remove the inner and outer drip pans,
2. Remove the service cover,
3. Remove the carafe,
4. Place the service cover,
5. Press down the on-off key for 5 seconds (It beeps 2 times)
6. Open the service cover,
7. Place the carafe,
8. Close the service cover,
9. Place the drip tray.
   It has been resetted to factory settings.

5 Operation

5.5 Preparing Frothy Milk for Coffee

As the temperature of steam is higher than the temperature of espresso, the espresso should be prepared before making frothy milk. Otherwise the espresso might get burnt.

Line drawing of a door with a handle and a small object inside, showing an angle of change (no text or symbols)

Prepare the espresso coffee with a larger cup. Turn the steam nozzle toward to the Drip tray.

Diagram showing a device with labeled components and a magnified view of its internal structure, including a speech bubble and light source.

Press the steam button. The steam indicator light will flash. Then the appliance will heat up and drain the residual water into the Drip Tray or another container. After the steam indicator light stops flashing and stays steady, place a container with milk under the steam nozzle and immerse the steam nozzle about 5cm deep into the container. Swivel the container while the hot steam comes out.

Illustration of a cup pouring cream into a glass over a teacup, with an arrow indicating rotation (no text or symbols)

Pour the hot frothy milk into the espresso. Now you can enjoy your coffee!

After the usage of steam nozzle, please clean the nozzle from the milk residue by wiping away the nozzle with a wet rag.

It is recommended to remove any milk residue that may accumulate at the tip of the nozzle by activating hot water function from the nozzle.

5.6 Hot Water

The appliance can dispense hot water by simply pressing the hot water button. The hot water button and the illumination lit up indicates that the appliance is heating up the water. When the hot water button and the illumination turn off, the water is ready to serve.

5.7 Mode Selection

The machine has three different settings: the default setting, ECO mode and speed mode. In ECO mode, the appliance saves more energy. In speed mode, the user can make their coffee faster than in the default setting.

5 Operation

	ECO Mode Speed Mode Default Setting
Illumination Light No Yes Yes
Pre-brewing* Yes No Yes
Auto shut off time 10mins 30mins 20mins
Cup Volume memory Yes Yes Yes

The pre-brewing function moistens the ground beans in the brewer with a small amount of water before full extraction. This expands the coffee grounds to build up greater pressure in the brewer, which helps extract all the oils and bring out the full flavour of the beans.

1. When the machine is in standby, press and hold the C for 5 seconds.
2. The Ⓐ will then flash and the next button will have the following indications for different settings:

	Hot water button[XYZC]	Strong espresso button[YSTC]	Mild espresso button
In ECO Mode Lights On	Flashing	Flashing
In Speed Mode	Yes No Flashing
In Default Setting	Flashing	Flashing	Lights On

1. Press the hot water button for ECO mode, strong espresso button for speed mode and mild espresso button for default settings. You'll hear two beeps when the mode has been selected. (Note: If you are pressing the lights on button for each mode, the machine will not respond).

2. If you would like the setting to remain unchanged, press again or wait for 5 seconds for the machine to return to standby condition.

6 Cleaning

6.1 Cleaning of the appliance

1. Disconnect the power cord from the mains supply outlet.
2. Pour away all the water in the internal and external drip tray.
3. Use a damp cloth or non-scratching cleaner to clean the water stains on the appliance.

WARNING: Never use any abrasive, vinegar or descaling agents not included in the box to clean the appliance.

Timely cleaning and maintenance of the appliance is very important in prolonging its life.

Technical diagram showing assembly steps of a mechanical component with labeled parts 1 and 2

Remove the external drip tray. Slide open the internal drip tray and the coffee grounds container.

Diagram showing a device with labeled parts and an inset magnified view of a test tube being inserted.

Remove metal tube by pulling it down. Then unlock the nozzle cover by turning it to left to disassemble the nozzle cover and metal tube.

Diagram illustrating a water tap and cleaning process with labeled steps and hand gestures

Empty the coffee grounds container and external drip tray. Wash the metal tube with warm running water and use needle or bristle of brush to clean the hole. Wash the nozzle cover with warm running water and use needle or bristle of brush to clean the hole. Dry them afterwards.

Diagram showing a hand inserting a component into a device with labeled parts 1 and 2

Assembly the metal tube back to the nozzle cover. Then push upward to place the nozzle cover back. And turn it to right to lock it.

When lights up, the coffee grounds container needs to be emptied. This icon will light up after every 10 coffee brews. Clean the container to reset the icon. If the container is clean, it will be enough to remove the container and put it back in place.

6 Cleaning

Diagram showing a device with labeled parts and directional arrows, likely illustrating a mechanical or electrical component assembly.

Press unlock area, sevice door will pop out. Then pull out the service door.

Illustration of a hand pressing a component with arrows indicating direction (no text or symbols)

Press release knobs and pull out. Remove

Illustration of a hand using a switch to adjust or install an electrical socket, with a faucet and water drop symbol nearby (no text or labels)

e brewer. Wash the brewer with fresh water. Dry the brewer afterwards.

When lights up, it indicates that the brewer is missing / installed improperly. When is flashing, it indicates that the service door is missing/installed improperly.

6.2 Self-Cleaning

WARNING: Please wait to finish the self-cleaning process and then switch off the machine.

When using flashing, it indicates that the appliance needs to undergo self-cleaning. The appliance will remain in the best condition if this function is performed at least once a month or more regularly depending on the hardness of water used. You should also

1. Fully fill the water tank.
2. Add one pack of cleaning agent included in the box to the water tank.

WARNING: Do not use vinegar or other cleaning agents for the self-cleaning of this appliance. The cleaning agent might damage the appliance.

1. Plug in the appliance.
2. Place a sufficiently large container under the coffee spout and nozzle.
3. In standby, press and hold (and the strong espresso button for 5 seconds. You'll hear a beep with and the strong espresso button will flash.
4. Press the strong espresso button to confirm the self-cleaning process. To resume back to the standby, press
5. If it's flashing, that indicates that the appliance is self-cleaning.

6 Cleaning

WARNING: Keep skin/body away from hot water.

1. When all the water in the water tank has been emptied, the ⏻ and self cleaning button ⚪ will flash. Remove all the remaining solution in the water tank and fill the tank with normal tap water up to the max position. When the tank is full, the ⏻ will goes off. Then the appliance will continue the self-cleaning process.
2. When the self-cleaning process is completed, the appliance will switch off automatically.

6.3 Empty System Function

Use the empty system function before a long period of non-use, for frost protection, and before talking to a repair agent.

1. In standby condition, press and hold the ① and the mild espresso button together for 5 seconds.
2. Will then start flashing.
3. Remove the water tank from the appliance. 📋 will light up indicating that the empty system is under way. Press before removing the water tank to return back to the standby.
4. When the empty system function is completed, the appliance will switch off automatically.

WARNING: After performing the EMPTY SYSYEM FUNCTION; press the hot water button until water can comes out from the spout when the coffee maker is reused again.

6.4 Manual Rinsing

You can manually rinse to clean the coffee nozzle after use. If the appliance has not been used for a long period of time, a manual rinse may be a good idea.

1. In standby, press and hold the and the hot water button together.
2. The hot water button 🔊, the strong espresso button 📋 and the mild espresso button 🌐 will then go off. The coffee nozzle will then dispense a small amount of water which is used for rinsing.

WARNING: The water comes out of the coffee nozzle is hot and is collected in the drip tray underneath. Avoid contact as it splashes around.

1. After rinsing, the appliance will return to the standby.

6 Cleaning

Cancelling the auto-clean mode

Your appliance cleans itself automatically before and after each brewing operation. You may follow the steps below to cancel the auto-clean mode.

- Turn on the appliance by pressing the On-Off switch ⏻ and wait until it engages the Stand-by position.

• Open the service cover.
• Press the On-Off switch for 5 seconds, a beep shall be heard.
• Close the service cover.
• Now, the auto-clean operation is cancelled.

We recommend you to use the auto-clean mode actively for a healthy operation.

7 Troubleshooting

Problem Cause Solution
The appliance does not work. The appliance is not connected to the mains.		Plug in and press the switch. Check the cable and the Plug.
No or delayed response in several trials of pressing a function key on the panel	Appliance is under an electromagnetic interference. Dirt over the panel.	Unplug the appliance. Restart after a few minutes Clean the panel with the cloth provided.
The coffee is not hot enough. The cups have not been preheated.The brewing unit is too cold.		Warm up your cup by using steam function before you make coffee or rinse the cup with hot water.Make sure that the water in the water tank is not too cold.
The coffee cannot come out from spout. Empty system function maybe used before.Coffee spout may not have been cleaned and blocked by coffee residues.		Press the hot water button until water can come out from the spout.Clean the coffee spout.
The first cup of coffee is poor quality. The first run of the grinder does not pour a sufficient quantity of coffee into the brewing unit.		Throw the coffee away. The next cups will be better.
The water tank is removed / the water level is very low in the water tank but there's no alert.	The area near the water tank connector is wet.	Wipe off the water around the water tank connector.
The internal drip tray is filled with a lot of water.	The ground coffee is too fine, which blocks the water from coming out.	Adjust the coffee fineness to bigger dot during grinder operation.
Coffee is delivered too slowly or a drop at a time.	Coffee grounds are too fine, which blocks the water from coming out.	Adjust the coffee fineness to bigger dot during grinder operation.
The indicator flashes that there's not enough coffee beans, but there are plenty inside the container.	The internal coffee grounds outlet is blocked.	Follow the steps described for Cleaning coffee grounds outlet.
The brewer or the coffee ground tray is impossible to remove.	The appliance did not finish the self-cleaning process and was switched off.	Please switch on the machine again and let it finish its auto cleaning process.
The appliance no longer performs the rinsing cycle when switched on or off.	Improper handling when servicing the appliance may be the cause.	1. When the appliance is on, remove the service door.2. Press and hold the on/off button until you hear 2 beeps.3. Replace service door.
The touch buttons are not sensitive. Not pressing the touch button from the front direction of the appliance.		Press the lower bottom part of the icon of the touch button from the front direction of the appliance.

Exploded view diagram of a smart appliance with numbered parts for identification

150mm 150mm 150mm 150mm 150mm

Technical line drawing of a device housing with an open base and internal components (no text or symbols)

Diagram showing a cable inserted into a device with an attached port (no text or symbols visible)

Line drawing of a mechanical device with a handle and mounting base (no text or symbols)

Technical line drawing of a mechanical device with an upward arrow indicating motion (no text or symbols)

Simple line drawing of a water tap with a handle and outlet (no text or symbols)

Technical line drawing of a mechanical device with an arrow indicating assembly or transformation (no text or symbols present)

Technical line drawing of a mechanical device with no visible text or symbols

Diagram of a kitchen appliance with a circular component and directional arrows indicating rotation (no text or symbols)

Technical line drawing of a mechanical device with no visible text or symbols

Line drawing of a portable industrial machine with a container pouring granular material from its top outlet (no text or symbols)

Technical line drawing of a device casing with an open lid and internal components, showing no text or symbols.

Line drawing of a device casing with a circular button labeled 'Power' and a base plate (no text or symbols beyond basic labels)

Line drawing of a modern coffee maker with a cup and tray (no text or symbols)

Line drawing of a coffee maker with a cup and a speech bubble indicating a coffee cup (no text or symbols present)

Technical line drawing of a device with a magnified inset showing two cups (no text or symbols)

2x beep!

Line drawing of a door with a handle and arrow indicating direction (no text or symbols)

Diagram showing a device with labeled components and a warning icon, indicating noise or hazard detection.

Illustration showing a cup pouring cream into a glass over a teacup, with an arrow indicating rotation (no text or symbols)

Technical diagram showing assembly steps of a mechanical component with labeled parts 1 and 2

Diagram showing a device with labeled parts and an inset magnified view of a test tube being inserted.

Diagram illustrating a water treatment procedure with faucet, equipment, and hand-drawn diagrams showing hand positioning and cleaning steps.

Diagram showing a hand inserting a component into a device with labeled parts 1 and 2

Diagram showing a device with labeled parts and directional arrows, likely illustrating a mechanical or electrical component.

Illustration of a hand holding an electrical socket with arrows indicating direction (no text or symbols)

Illustration of a hand using a switch to adjust or install an electronic device, with a faucet and water drop symbol nearby (no text or labels)

Exploded view diagram of a smart appliance with numbered parts for identification

150mm 150mm 150mm 150mm 150mm

Technical line drawing of a device housing with an open base and internal components (no text or symbols)

Diagram showing a cable inserted into a device with an attached port (no text or symbols visible)

Technical line drawing of a mechanical device with no visible text or symbols

Technical line drawing of a mechanical device with an upward arrow indicating motion (no text or symbols)

Simple line drawing of a water tap with a handle and outlet (no text or symbols)

Technical line drawing of a mechanical device with an arrow indicating assembly or transformation (no text or symbols present)

Line drawing of a mechanical device with a handle and side panel, showing no text or symbols.

Diagram of a device with a magnifying glass and circular button, showing rotational motion (no text or symbols)

Technical line drawing of a mechanical device with no visible text or symbols

Line drawing of a mechanical device with a container pouring granular material from its top (no text or symbols)

Line drawing of a device casing with an open lid and internal compartments, showing no text or symbols.

Line drawing of a device casing with a circular button labeled 'Power' and no visible text or symbols

Line drawing of a coffee maker with a cup and lid, no text or symbols present

Line drawing of a coffee maker with a cup and a speech bubble indicating coffee (no text or symbols)

Line drawing of a door with a handle and a small object inside, showing an angle of change (no text or symbols)

Diagram showing a device with noise pollution and light source, labeled in Chinese with arrows indicating motion or adjustment.

Illustration of a cup pouring cream into a glass over a teacup, with an arrow indicating rotation (no text or symbols)

Technical diagram showing assembly steps of a mechanical component with labeled parts 1 and 2

Diagram showing a device with labeled parts and an inset magnified view of a test tube component.

Diagram illustrating a water tap and cleaning process with labeled components and hand-drawn illustrations of inspection steps.

Diagram showing a hand inserting a component into a device with labeled parts 1 and 2

Diagram showing a device with labeled parts 1 and 2, indicating components of a device or assembly.

Illustration of a hand pressing a component with arrows indicating direction (no text or symbols)

Illustration of a hand using a smartphone to adjust or install an electronic device, with a faucet and screen visible (no text or symbols)

Exploded view diagram of a device with numbered parts for identification

150mm 150mm 150mm 150mm 150mm

Technical line drawing of a device housing with an open base and internal components (no text or symbols)

Diagram showing a cable inserted into a device component with a connector (no text or symbols visible)

Technical line drawing of a mechanical device with no visible text or symbols

Technical line drawing of a mechanical device with an upward arrow indicating motion (no text or symbols)

Simple line drawing of a water tap with a handle and outlet (no text or symbols)

Technical line drawing of a mechanical device with an arrow indicating assembly or transformation (no text or symbols present)

Line drawing of a 3D printer or device casing with a handle and mounting base, showing no text or symbols.

Diagram of a kitchen appliance with a circular component and directional arrows indicating rotation (no text or symbols)

Technical line drawing of a mechanical device casing with mounting bracket and internal components (no text or symbols)

Line drawing of a mechanical device with a container pouring granular material from its top (no text or symbols)

Line drawing of a device casing with an open lid and internal compartments, showing no text or symbols.

Technical line drawing of a device casing with a circular button labeled 'Power' (no text or symbols on the device itself)

Line drawing of a modern coffee maker with a cup and tray (no text or symbols)

Illustration of a coffee maker with a cup and a speech bubble indicating coffee (no text or symbols present)

BEEP! 2x beep!

Diagram of a door switch mechanism with a directional arrow indicating rotation (no text or symbols present)

Diagram showing a device with labeled components and two circular annotations indicating warning or alert points.

Illustration of a cup pouring cream into a glass over a teacup, with an arrow indicating rotation (no text or symbols)

Technical diagram showing assembly steps of a mechanical component with labeled parts 1 and 2

Diagram showing a device with labeled parts and an inset magnified view of a test tube being inserted.

Diagram illustrating a water treatment procedure with labeled components and magnified views of the process.

Diagram showing a hand inserting a component into a device with labeled parts 1 and 2

Diagram showing a device with labeled parts 1 and 2, indicating directional or flow direction.

Illustration of a hand pressing a component with arrows indicating direction (no text or symbols)

Illustration of a hand using a smartphone to adjust or install an electronic device, with a faucet and screen diagram in the background (no text or symbols)

- https://twitter.com/beko_tr

- https://www.facebook.com/bekoturkiye/

- https://www.youtube.com/user/BekoChannel

* Posta Adresimiz:

Exploded view diagram of a smart appliance with numbered parts for identification

150mm 150mm 150mm 150mm 150mm

Technical line drawing of a device housing with an open base and internal components (no text or symbols)

Diagram showing a cable inserted into a device with an attached plug (no text or symbols visible)

Technical line drawing of a mechanical device with no visible text or symbols

Technical line drawing of a mechanical device with an upward arrow indicating motion (no text or symbols)

Simple line drawing of a water tap with a handle and outlet (no text or symbols)

Technical line drawing of a mechanical device with an arrow indicating assembly or transformation (no text or symbols present)

Line drawing of a mechanical device with a handle and base, showing no text or symbols

Diagram of a device with a magnifying glass and circular component, showing rotational motion (no text or symbols)

Technical line drawing of a mechanical device with no visible text or symbols

Technical line drawing of a mechanical device with internal components and a pouring drop (no text or symbols)

Technical line drawing of a device casing with an open lid and internal components, showing no text or symbols.

Line drawing of a device casing with a circular button labeled 'Power' and no visible text or symbols

Line drawing of a modern coffee maker with a cup and tray (no text or symbols)

Line drawing of a coffee maker with a cup and a speech bubble indicating coffee (no text or symbols)

Line drawing of a door switch mechanism with a tool, showing no text or symbols

Diagram showing a device with labeled components and an instructional arrow, indicating a process or operation.

Illustration of a cup pouring whipped cream into a glass, with an arrow indicating rotation (no text or symbols)

Technical diagram showing assembly steps of a mechanical component with labeled parts 1 and 2

Diagram showing a device with labeled parts and an inset magnified view of a test tube being inserted.

Diagram illustrating a water tap and cleaning process with labeled illustrations of inspection steps

Diagram showing a hand inserting a component into a device with labeled parts 1 and 2

Diagram showing a device with labeled parts and directional arrows, likely illustrating a mechanical or electrical component assembly.

Hand holding a device with arrows pointing to the interior (no text or symbols visible)

Illustration of a hand using a switch to adjust or install an electrical component, with a magnified view of a water level device (no text or symbols present)

Exploded view diagram of a device with numbered parts for identification

150mm 150mm 150mm 150mm 150mm

Technical line drawing of a device housing with an open base and internal components (no text or symbols)

Diagram showing a cable inserted into a device with an attached port (no text or symbols visible)

Technical line drawing of a mechanical device casing with mounting base and internal components (no text or symbols)

Technical line drawing of a mechanical device with an upward arrow indicating motion (no text or symbols)

Simple line drawing of a water tap with a handle and outlet (no text or symbols)

Technical line drawing of a mechanical device with an arrow indicating assembly or transformation (no text or symbols present)

Line drawing of a mechanical device with a handle and mounting base (no text or symbols)

Diagram of a refrigerator with a circular dial and directional arrows indicating rotation (no text or symbols)

Technical line drawing of a mechanical device with no visible text or symbols

Technical line drawing of a mechanical device with granular material being poured into it (no text or symbols)

Line drawing of a device casing with an open lid and internal components, showing no text or symbols.

Line drawing of a device casing with a circular button labeled 'Power' and no visible text or symbols

Line drawing of a coffee maker with a cup and lid, no text or symbols present

Line drawing of a coffee maker with a cup and a speech bubble indicating coffee (no text or symbols)

Line drawing of a door with a handle and arrow indicating rotation (no text or symbols)

Diagram showing a device with labeled components and an instructional arrow, indicating a process or operation.

Illustration of a cup pouring cream into a glass over a teacup, with an arrow indicating rotation (no text or symbols)

Technical diagram showing assembly steps of a device with labeled components 1 and 2

Diagram showing a device with labeled parts and an inset magnified view of a test tube being inserted.

Diagram illustrating a water tap and cleaning process with labeled steps and hand gestures

Diagram showing a hand holding a device with labeled parts 1 and 2, indicating a step in operation.

Diagram showing a device with labeled parts and directional arrows, likely illustrating a mechanical or electrical component assembly.

Hand holding a device with arrows pointing to the handle (no text or symbols visible)

Illustration of a hand using a tool to adjust or install an electrical socket, with a magnified view of the socket and faucet (no text or symbols)

Exploded view diagram of a device with numbered parts for identification

150mm 150mm 150mm 150mm 150mm

Line drawing of a device with an open lid and internal components, no text or symbols present

Diagram showing a cable inserted into a device with an attached port (no text or symbols visible)

Technical line drawing of a mechanical device with no visible text or symbols

Technical line drawing of a mechanical device with an upward arrow indicating motion (no text or symbols)

Simple line drawing of a water tap with a handle and outlet (no text or symbols)

Technical line drawing of a mechanical device with an arrow indicating assembly or transformation (no text or symbols present)

Line drawing of a mechanical device with a handle and side panel, showing no text or symbols.

Diagram of a device with a circular component and rotational arrow, enclosed in a rectangular frame (no text or symbols)

Technical line drawing of a mechanical device with no visible text or symbols

Line drawing of a portable coffee machine with a spool of coffee being poured into it (no text or symbols)

Technical line drawing of a device casing with an open lid and internal components, showing no text or symbols.

Line drawing of a device casing with a circular button labeled 'Power' and no visible text or symbols

Line drawing of a modern coffee maker with a cup and tray (no text or symbols)

Line drawing of a coffee maker with a cup and a speech bubble indicating coffee (no text or symbols present)

Line drawing of a door with a handle and a small object inside, showing an angle of change (no text or symbols)

Diagram showing a device with labeled components and directional arrows, including speech bubbles and lightbulb icons.

Illustration showing a cup pouring cream into a glass over a teacup, with an arrow indicating rotation (no text or symbols)

Technical diagram showing assembly steps of a device with labeled components 1 and 2

Diagram showing a device with labeled parts and an inset magnified view of a tool, likely illustrating a mechanical or electrical process.

Illustration showing a faucet spraying water, with close-up insets of hand positioning and cleaning steps.

Diagram showing a hand inserting a component into a device with labeled parts 1 and 2, indicating assembly or insertion.

Diagram showing a device with labeled parts and directional arrows, likely illustrating a mechanical or electrical component.

Hand inserting a plug into a socket, showing mechanical components and directional arrows (no text or symbols)

Illustration of a hand using a smartphone to adjust or install a device, with a magnified inset showing a device being installed (no text or symbols present)

Exploded view diagram of a device with numbered parts for identification

150mm 150mm 150mm 150mm 150mm

Technical line drawing of a device with an open base and internal components, no text or symbols present

Diagram showing a cable inserted into a device with an attached port (no text or symbols visible)

Technical line drawing of a mechanical device casing with mounting base and internal components (no text or symbols)

Technical line drawing of a mechanical device with an upward arrow indicating motion (no text or symbols)

Line drawing of a water tap with a handle and outlet (no text or symbols)

Technical line drawing of a mechanical device with an arrow indicating assembly or transformation (no text or symbols present)

Line drawing of a mechanical device with a handle and mounting base (no text or symbols)

Diagram of a device with a circular component and rotational arrow, enclosed in a rectangular frame (no text or symbols)

Technical line drawing of a mechanical device with no visible text or symbols

Technical line drawing of a mechanical device with a spool of granular material being poured into it (no text or symbols)

Technical line drawing of a device casing with an open lid and internal components, showing no text or symbols.

Line drawing of a device casing with a circular button labeled 'Power' and no visible text or symbols

Line drawing of a modern coffee maker with a cup on the base (no text or symbols)

Line drawing of a coffee maker with a cup and a speech bubble indicating coffee (no text or symbols present)

Technical line drawing of a device with a magnified inset showing two cups (no text or symbols)

2x beep!

Line drawing of a door with a handle and arrow indicating rotation (no text or symbols)

Diagram showing a device with noise pollution and light emission, labeled with Chinese characters and directional arrows.

Illustration of a cup pouring milk from a bottle into a glass, with an arrow indicating rotation (no text or symbols)

Technical diagram showing three labeled components: a housing, a base case, and a battery pack, with arrows indicating assembly or movement.

Diagram showing a device with labeled parts and an inset magnified view of a test tube component.

Diagram illustrating a water tap and cleaning process with labeled steps and magnified views of the process.

Technical diagram showing a hand holding a component with labeled parts 1 and 2, indicating a step in operation.

Diagram showing a device with labeled parts and directional arrows, likely illustrating a mechanical or electrical component assembly.

Hand holding a small electronic device with arrows pointing to the handle (no text or symbols visible)

Illustration of a hand using a switch to adjust or install an electrical socket, with a magnified view of the socket and faucet (no text or symbols)

Exploded view diagram of a smart appliance with numbered parts for identification

150mm 150mm 150mm 150mm 150mm

Technical line drawing of a device housing with an open base and internal components (no text or symbols)

Diagram showing a cable inserted into a device with an attached port (no text or symbols visible)

Technical line drawing of a mechanical device with no visible text or symbols

Technical line drawing of a mechanical device with an upward arrow indicating motion (no text or symbols)

Line drawing of a water tap with a container and handle (no text or symbols)

Technical line drawing of a mechanical device with an arrow indicating assembly or transformation (no text or symbols present)

Line drawing of a mechanical device with a handle and mounting base (no text or symbols)

Diagram of a device with a circular component and rotational arrow, enclosed in a rectangular frame (no text or symbols)

Technical line drawing of a mechanical device with no visible text or symbols

Line drawing of a mechanical device with a container and spool pouring into it (no text or symbols)

Technical line drawing of a device casing with an open lid and internal components, showing no text or symbols.

tru boabe.

Line drawing of a device casing with a circular button labeled 'Power' pointing to its side panel (no text or symbols on the casing itself)

Line drawing of a modern coffee maker with a cup on the tray (no text or symbols)

Line drawing of a coffee maker with a cup and a speech bubble indicating coffee (no text or symbols present)

Line drawing of a door with a handle and arrow indicating rotation (no text or symbols)

Diagram showing a device with noise pollution and a close-up of its component, labeled in Chinese.

Illustration of a cup pouring cream into a glass with a rotating arrow indicating rotation (no text or symbols)

Technical diagram showing a mechanical assembly with labeled parts 1 and 2, likely illustrating a process or assembly step.

Diagram showing a device with labeled parts and an inset magnified view of a test tube component.

Diagram illustrating a procedure for surface cleaning, showing faucet, tools, and cleaning steps with magnified views.

Diagram showing a hand pressing a button on a device component with labeled parts 1 and 2

Diagram showing a device with labeled parts and directional arrows, likely illustrating a mechanical or electrical component assembly.

Hand holding a device with arrows pointing to the handle (no text or symbols visible)

Illustration of a hand using a smartphone to clean or install a wall-mounted device, with a magnified inset showing the device's water level (no text or symbols present)

Exploded view diagram of a device with numbered parts for identification

150mm 150mm 150mm 150mm 150mm

Technical line drawing of a device casing with an open lid and internal components (no text or symbols)

Diagram showing a cable inserted into a device component with a connector (no text or symbols visible)

Technical line drawing of a mechanical device casing with mounting base and internal components (no text or symbols)

Zdvihnite nádrž na vodu pomocou veka s rukoväťou.

Technical line drawing of a mechanical device with an upward arrow indicating motion (no text or symbols)

Simple line drawing of a water tap with a handle and outlet (no text or symbols)

vodou, potom ju naplňte na úroveň Max a vložte ju spăť do zariadenia. Skontrolujte, či je úplne zasunutá.

4 Príprava

Pre zabránenie pretečeniu vody z nádrže na vodu, nepridávajte vodu priamo do zariadenia pomocou inej nádoby.

Technical line drawing of a mechanical device with an arrow indicating assembly or transformation (no text or symbols present)

Line drawing of a mechanical device with a handle and mounting base (no text or symbols)

Nádobu na vodu zatvorte pomocou veka.

5 Prevádzka

5.1 Nastavenie mletia

Diagram of a device with a circular component and rotational arrow, no text or symbols present

Technical line drawing of a mechanical device with no visible text or symbols

Line drawing of a portable industrial machine with granular material being poured into it (no text or symbols)

Pomaly nasypte zrnkovú kávu. Nasad'te spät'veko nádoby.

Technical line drawing of a device casing with an open lid and internal components, showing no text or symbols.

Line drawing of a device casing with a circular button labeled 'Power' and no visible text or symbols

Line drawing of a modern coffee maker with a cup and tray (no text or symbols)

Line drawing of a coffee maker with a cup and a speech bubble indicating coffee (no text or symbols)

Line drawing of a door with a handle and a small object inside, showing an angle of change (no text or symbols)

Diagram showing a device with labeled components and warning symbols, including a speech bubble and lightbulb icon.

Illustration showing a cup pouring cream into a glass over a teacup, with an arrow indicating rotation (no text or symbols)

Technical diagram showing assembly steps of a device with labeled components 1 and 2

Diagram showing a device with labeled parts and an inset magnified view of a test tube being inserted.

Diagram illustrating a water tap and cleaning process with labeled steps and hand gestures

Technical diagram showing a hand holding a component with labeled parts 1 and 2, indicating a step in operation.

Znovu namontujte kovovú rúrku na kryt trysky. Potom zatlačte nahor a nasad'te kryt trysky spät. Pre upevnenie ho otočte doprava.

Diagram showing a device with labeled parts and directional arrows, likely illustrating a mechanical or electrical component assembly.

Stlačte oblast' odomknutia, vysunú sa servisné dvere. Potom vytiahnite servisné dvere.

Hand holding a device with arrows pointing to the handle (no text or symbols visible)

Illustration of a hand using a power tool to adjust or install an electrical socket, with a magnified view of the socket and faucet (no text or symbols)

Simple line icon of a steaming coffee cup on a saucer (no text or symbols)

CEG 3192 B

RU

Exploded view diagram of a device with numbered parts for identification

150mm 150mm 150mm 150mm 150mm

Technical line drawing of a device with an open lid and internal components, showing no text or symbols.

Diagram showing a cable inserted into a device with an attached port (no text or symbols visible)

Technical line drawing of a mechanical device with no visible text or symbols

Technical line drawing of a mechanical device with an upward arrow indicating motion (no text or symbols)

Line drawing of a water tap with faucet (no text or symbols)

Technical line drawing of a mechanical device with an arrow indicating assembly or transformation (no text or symbols present)

Technical line drawing of a mechanical device with no visible text or symbols

Diagram of a device with a magnifying glass and circular button, showing rotational motion (no text or symbols)

Technical line drawing of a mechanical device with no visible text or symbols

Line drawing of a portable industrial machine with a spool of granular material being poured into it (no text or symbols)

Technical line drawing of a device casing with an open lid and internal compartments (no text or symbols)

Line drawing of a device casing with a circular button labeled 'Power' and a base plate (no text or symbols on the casing itself)

Line drawing of a modern coffee maker with a cup on the base (no text or symbols)

Line drawing of a coffee maker with a cup and a speech bubble indicating coffee (no text or symbols present)

Line drawing of a portable coffee machine with a magnified inset showing two cups (no text or symbols)

2x beep!

Line drawing of a door switch with a lever mechanism, no text or symbols present

Diagram showing a device with labeled components and two circular annotations highlighting warning or alert zones.

Illustration of a cup pouring cream into a glass with a rotating arrow (no text or symbols)

Technical diagram showing assembly steps of a device with labeled components 1 and 2

Diagram showing a device with labeled parts and an inset magnified view of a test tube being inserted.

Diagram illustrating household cleaning and sanitation process with labeled components and visual insets showing inspection steps

Technical diagram showing a hand operating a device with labeled parts 1 and 2, indicating step 1 and step 2.

Diagram showing a device with labeled parts and directional arrows, likely illustrating a mechanical or electrical component.

Illustration of a hand pressing a component with arrows indicating direction (no text or symbols)

Illustration of a hand using a handheld device to adjust or install a wall-mounted device, with a magnified inset showing the device's handle and water level (no text or symbols present)

Exploded view diagram of a device with numbered parts for identification

150mm 150mm 150mm 150mm 150mm

Technical line drawing of a device with an open base and internal components, showing no text or symbols.

Diagram showing a cable inserted into a device with an attached port (no text or symbols visible)

Line drawing of a mechanical device casing with a handle and mounting bracket (no text or symbols)

Technical line drawing of a mechanical device with an upward arrow indicating motion (no text or symbols)

Illustration of a water tap with a handle and outlet (no text or symbols)

Technical line drawing of a mechanical device with an arrow indicating assembly or transformation (no text or symbols present)

Technical line drawing of a mechanical device with no visible text or symbols

Diagram of a device with a magnifying glass and circular dial, showing rotational motion (no text or symbols)

Technical line drawing of a mechanical device with no visible text or symbols

Line drawing of a mechanical device with a container pouring granular material from its top (no text or symbols)

Technical line drawing of a device casing with an open lid and internal components, showing no text or symbols.

Line drawing of a device casing with a circular button labeled 'Power' and no visible text or symbols

Line drawing of a modern coffee maker with a cup and lid, no text or symbols present

Line drawing of a coffee maker with a cup and a coffee cup, showing no text or symbols.

Line drawing of a door switch mechanism with a directional arrow indicating motion (no text or symbols)

Diagram showing a device with warning symbols and a rotating arrow, indicating a process or operation.

Illustration of a cup and a glass pouring milk from a container, with an arrow indicating rotation (no text or symbols)

Technical diagram showing assembly steps of a mechanical component with labeled parts 1 and 2

Diagram showing a device with labeled parts and an inset magnified view of a tool tip, likely illustrating a mechanical or electrical component.

Diagram illustrating a water tap and its components, with magnified views showing hand positioning and surface cleaning steps.

Technical diagram showing a hand pressing a component labeled '1' and '2' on a device casing, with arrows indicating direction of movement.

Diagram showing a device with labeled parts and directional arrows, likely illustrating a mechanical or electrical component assembly.

Hand holding a device with arrows pointing to the handle (no text or symbols visible)

Illustration of a hand using a smartphone to adjust or install a device, with a faucet and water drop symbol (no text or labels)

Diagram showing a device with labeled parts and directional arrows, likely illustrating a mechanical or electrical component assembly.

Hand holding a device with arrows pointing to the handle (no text or symbols visible)

Illustration of a hand using a smartphone to clean or install an electronic device, with a faucet and water drop symbol nearby (no text or labels)

Technical diagram showing three labeled components (1, 2) of a mechanical assembly or housing assembly with directional arrows indicating movement.

Diagram showing a device with labeled parts and an inset magnified view of a test tube component.

Diagram illustrating household water safety interventions, showing faucet discharge, kitchen equipment, and handwashing steps with magnified views.

Diagram of a device with labeled parts and directional arrows indicating movement or assembly steps

(T770)		[2X×3]	ECO
			EOC
			EOC
			EOC

Line drawing of a door switch mechanism with an arrow indicating rotation (no text or symbols)

Diagram showing a device with airflow indicators and a warning sign, illustrating fluid flow and safety instructions.

Illustration of a cup pouring milk from a glass bottle into a cup, with an arrow indicating rotation (no text or symbols)

Line drawing of a device with a speech bubble highlighting a pair of cups (no text or symbols present)

Line drawing of a device casing with a circular button labeled 'Power' pointing to its side panel (no text or symbols on the device itself)

Line drawing of a modern coffee maker with a cup and tray (no text or symbols)

Illustration of a coffee maker with a cup and a speech bubble showing coffee (no text or symbols)

Diagram of a kitchen appliance with a circular dial and directional arrows indicating rotation (no text or symbols)

Technical line drawing of a mechanical device with no visible text or symbols

Line drawing of a portable coffee machine with a container pouring granular material from its top outlet (no text or symbols)

Technical line drawing of a device casing with an open lid and internal compartments (no text or symbols)

Technical line drawing of a device with an open lid and internal components, showing a change from left to right (no text or symbols)

150mm 150mm 150mm 150mm 150mm

Technical line drawing of a device housing with an open base and internal components (no text or symbols)

Line drawing of a device's cable connector with an internal socket (no text or symbols)

Line drawing of a mechanical device with a handle and mounting base (no text or symbols)

Technical line drawing of a mechanical device with an upward arrow indicating motion (no text or symbols present)

Simple line drawing of a water tap with a handle and outlet (no text or symbols)

Exploded view diagram of a device with numbered parts for identification

Simple line icon of a steaming coffee cup on a saucer (no text or symbols)

CEG 3192 B

AR