SEGWAY Ninebot KickScooter MAX G2 E - Electric scooter

Ninebot KickScooter MAX G2 E - Electric scooter SEGWAY - Free user manual and instructions

Find the device manual for free Ninebot KickScooter MAX G2 E SEGWAY in PDF.

📄 48 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SEGWAY Ninebot KickScooter MAX G2 E - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeElectric Scooter
BrandSegway
ModelNinebot KickScooter MAX G2 E
Dimensions (unfolded)1210 × 573 × 1264 mm
Dimensions (folded)1210 × 570 × 605 mm
Net weight24.25 kg
Maximum load120 kg
Recommended age13 to 55 years
Recommended height120 to 200 cm
Maximum speed25 km/h (S mode)
Range (optimal)70 km
Range (typical)50 km
Maximum slope29%
BatteryLithium-ion 551 Wh, 36 V
Charging timeApproximately 6 hours
Motor nominal450 W
Motor max power900 W
Tires10 inches, self-sealing
Tire pressure47 to 48 psi
Protection ratingIPX5
ConnectivityBluetooth (Segway-Ninebot app)
LightsFront and rear constantly on
BrakeRear disc brake
Speed modesECO (15 km/h), D (20 km/h), S (25 km/h)
MaintenanceClean with damp cloth, check tires and screws

Frequently Asked Questions - Ninebot KickScooter MAX G2 E SEGWAY

How to charge the battery?
Plug the charger into a power outlet (100-240 V) and connect it to the scooter. The charger indicator turns green when charging is complete (approx. 6 hours). Use only the supplied charger.
What are the different speed modes?
The scooter has three modes: ECO (15 km/h), D (Standard, 20 km/h) and S (Sport, 25 km/h for the E version). You can select them via the app or the power button.
What is the actual range?
The typical range is 50 km, and can reach 70 km in optimal conditions (light load, moderate speed, flat terrain). The range depends on weight, temperature, and riding style.
How to inflate the tires?
The tires should be inflated to a pressure between 47 and 48 psi. Use a suitable pump. Check pressure regularly to avoid punctures.
Is the scooter waterproof?
Yes, it is IPX5 certified, meaning it resists water splashes. Do not immerse it and avoid heavy rain.
What is the maximum supported weight?
The maximum allowed weight is 120 kg (265 lbs). Do not exceed this limit for safety reasons.
How to fold the scooter?
Lower the folding handle on the stem, then fold the handlebar backwards. The scooter locks in the folded position for easy storage.
What to do in case of an error or fault code?
Check the 'Common malfunctions' section of the manual. Error codes (e.g., 10, 11...) indicate sensor or battery issues. Contact customer service if the problem persists.
How to maintain the scooter?
Clean it with a damp cloth without harsh chemicals. Regularly check tire pressure, tighten main screws (torque 5.5-7 Nm), and inspect brakes every 3 months or 1000 km.
Can I use the app and what does it do?
Yes, the Segway-Ninebot app connects via Bluetooth. It allows you to change modes, lock the scooter, monitor battery life, and update the firmware.

User questions about Ninebot KickScooter MAX G2 E SEGWAY

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Electric scooter in PDF format for free! Find your manual Ninebot KickScooter MAX G2 E - SEGWAY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Ninebot KickScooter MAX G2 E by SEGWAY.

USER MANUAL Ninebot KickScooter MAX G2 E SEGWAY

Dashboard & Power Button

SEGWAY Ninebot KickScooter MAX G2 E - Dashboard & Power Button - 1

Power Button Press the button to push to compress and hold this button for 3 seconds to power off. When the lid is closed on the push button, it turns off the headlight and the lid light and press release to switch between the sound modes.
Spendomeier, display the current speed of the sloop, as well as error codes.
Driinlndicatior:When rnririg hcrigh,preiieh e" (le) or " (right) wthch an he dian in cindan swich. Then the
rction indicator will as regularly whcet can be tumed by pressing for corresponding switch again.

()

SPEHIMSE. HOOOHNHOOOSA

ModeleModelMax G2 BMax G2 E
ECO (Energy-saving mode)15 km/h (9.3 mph)12 km/h (8.3 mph)
D (Standard mode)20 km/h (12.4 mph)20 km/h (12.4 mph)
S (Sport mode)25 km/h (15.6 mph)20 km/h (12.4 mph)

Paeetoh 1
Battery Level: Incotal battery evel equals 0
The lllery power overy low when he first tllery hien ined. Plesse change your KideScochim immediately.

Specifications

Item Parameter
ProductNameNinobot KickScooter Max G2
Model05.501T 0510D
Length × Width × HeightApprox. 1210 × 570 × 125 mm (47.8 × 22.7 × 49.8 m)
Traded Length × Width × HeightApprox. 1210 × 570 × 505 mm (77.6 × 22.4 × 23.9 m)
Net WeightApprox. 24.25 kg (33.5 lbs)
RiderMax Speed120 kg (265 mph)
Recommended Age18 - 65 years old
Required Height120 - 240 pm (81" - 65")
MachineMax SpeedApprox. 25 km/h (15.5 mph) Approx. 20 km/h (12.4 - on)
Theoretical RangeApprox. 70 km (43.5 miles)
Typical RangeApprox. 50-40 m (31 miles)
Max SlopeApprox. 22%
Traversable TerrainMost of the flat road conditions and typical Belgian roads
Operating Temperature10 - 70°C (4 - 104°F)
Storage Temperature10 - 50°C (4 - 122°F), recommended 10 - 30°C (50 - 86°F)
IP RatingIPX5
Duration of ChargingApprox. 6 h
BatteryNominal Voltage36 V=
Max Charging Voltage42 V=
Charging Ambient Temperature0 - 60°C (32 - 104°F)
Nominal Capacity15.3 Ah
Nominal Energy551 Wh
Battery Management SystemOver-heater short circuit over-current, over-discharge and over-charge protection
MotorNominal Power0.45 kW, 450 W
Max Power0.3 kW, 300 W
ChargerModelNR.420C.320W
Type: Bulbini
Output Power0.125 kW, 121.8 W
Input Voltage100.240V - 60 - 60 Hz, 2.0 A MAX
Max. Output Voltage42 V=
Output Current2.9 A
TireLife Warranty42 - 42 psi
Lures20 inch Tubolite Self sealing Tire
                                                                                                                              1. 64.

SEGWAY Ninebot KickScooter MAX G2 E - Specifications - 1

Certifications

The battery complies with UN 38.3.

European Union Compliance Statement Important WEEE information

SEGWAY Ninebot KickScooter MAX G2 E - Certifications - 1

This symbol on the product or on its packaging indicates that used electrical and electronic products should not be mixed with unsorted municipal waste. For proper treatment, it is your responsibility to dispose of your waste equipment by arranging to return it to designated collection points.

Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling.

Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation. Please contact your local authority for further details of your nearest designated collection point.

Battery recycling Information for Users

SEGWAY Ninebot KickScooter MAX G2 E - Certifications - 2

This symbol means that batteries and accumulators, at their end-of-life, should not be mixed with unsorted municipal waste. Your participation is an important part of the effort to minimize the impact of batteries and accumulators on the environment and on human health. For proper recycling you can return this product or the batteries or accumulators it contains to your supplier or to a designated collection point.

Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling.

Penalties may be applicable for Incorrect disposal of this waste, in accordance with your national legislation. there are separate collection systems for used batteries and accumulators.

Please, dispose of batteries and accumulators correctly at your local community waste collection/recycling center.

Radio Equipment Directive

Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product listed in this section comply with the essential

requirements and other relevant provisions of the Radio Equipment Directive 2014/53/EU.

Restriction of the use of certain hazardous substances (RoHS) Directive

Ninebot (Changzhou) Tech Co., Ltd. hereby declares the whole product including parts (cables, cords, and so on) meets the requirements of RoHS Directive 2011/65/EU and amendment Commission Delegated Directive (EU) 2015/863 on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("RoHS recast" or "RoHS 2.0").

Machinery Directive

Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product listed in this section comply with the essential requirements and other relevant provisions of the Machinery Directive 2006/42/EC.

SEGWAY Ninebot KickScooter MAX G2 E - Certifications - 3

EU Authorised Representative:

Segway Ninebot Europe

Dynamosstraat 7, 1014 BN Amsterdam, The Netherlands.

Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product model: 051501E. 051501D comply with the essential requirements and other relevant provisions of the Radio Equipment Directive 2014/53/EU, the machinery directive 2006/42/EC, and the RoHS Directive 2011/65/EU and amendment Commission Delegated Directive (EU) 2015/863.

The declaration of conformity can be viewed at the following address: https://eu-en.segway.com/instruction-manuals

UK Compliance Statement

Radio Equipment Regulations 2017

Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product listed in this section comply with the essential requirements and other relevant provisions of Radio Equipment Regulations 2017.

The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012

Ninebot (Changzhou) Tech Co., Ltd. hereby declares the whole product including parts (cables, cords, and so on) meets the requirements of The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.

Supply of Machinery (Safety) Regulations 2008

Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product listed in this section complies with the essential

requirements and other relevant provisions of The Safety of Supply of Machinery (Safety) Regulations 2008.

SEGWAY Ninebot KickScooter MAX G2 E - Certifications - 4

UK Authorised Representative:

UKCA Experts Ltd.

Dept 302,43 Owston Road Carcroft, Doncaster, DNE BDA. United Kingdom

Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product model OS1501E complies with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017, Supply of Machinery (Safety) Regulations 2008 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.

The declaration of conformity can be viewed at the following address: www.segway.com

BluetoothFrequency Band(s)2.4000 - 2.4835GHz
Max. RF Power20mW

Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.

SEGWAY Ninebot KickScooter MAX G2 E - Certifications - 5

To ensure safe riding, city to day care and regular maintenance are essential. You the owner, have control and knowledge of how often you use your scooter, how harc you use it and where you use it. It is the owner's responsibility to perform regular checks and bring your scooter to authorized service center for inspection and service. Please refer to the maintenance schedule below.

Note: This maintenance schedule charges a service fee.

Item ComponentMaintenance MethodEvery 3 monthsEvery 6 months (until every 500 km) (100 miles)Every 1 year or every 1000 km (500 miles)Every 2 years or every 1000 km (1000 miles)
Mainframe maintenanceMainframe partsThe screw, the shaft to obse the mainframe clean.√√√
Tire pressureInflate tires to 42.48 psi√√√
Tire wearClese if the tires are cracked, deformed, or significantly worn
Screws on the stem topTighten the screws fixed with the horizontal and the stem. "The suggested torque is 6.5-10.5 N-m"
Tighten the screws on the vertical. The suggested torque is 6.5-10 N-m. Tighten the screws on the stem top. The suggested torque is 8.5+0.5 N-m.
Screws on the steering mechanismTighten the steering of the steering handle and the front fork. Also lateral screws at this site. The recommended torque is 15+15 N-m. Fold an uncured, unmarked section. The recommended force is 15+15 N-m. Fold the connecting rod, and then the connected screws when packing in the side. The folding is smooth without shaking.
Item ComponentVibrationance MethodEvery 3 monthsEvery 6 months or every 500 mm (±20 miles)Every 1 year or every 1000 miles (±20 miles)Every 3 years or every 200000 km (±20 miles)
Function inspectionHaptic motorTo accelerate and decelerate, check if the haptic motor is shalved out of its abnormal sounds.
Front wheel maintenanceCheck if the front wheel is shalved or gets wavy, or the wheels shift unidirectional.
Brake adjustmentIf the brake is too tight/loser, use the 4 mm Allen key to loosen the screw in the caliper. Then slightly adjust the brake inc (do/recover/increase the exposed ring), and it goes the screw again. Test standard the tire speed to 20 mm/h (12.4 mph) and it stroking the distance is uniform.
Drum brakesFrom the headspace turn inside a normal abnormal sound, front which can be praked after squeezing the brake lever.
BallightSeawee the ballight lever, the ballight works normally.
HeadlightCheck the headlight and see if it lights langitly.
Direction indicatorsTo get the direction indicator button to the left/right sequence, check if the direction indicator on the left/right side flash normally.
Dashboards"Power on the dashboard, the dashboard works properly."
HotPress the hot button and the sound is quiet.
ThrottlePress and hold the throttle limiter release switch for the acceleration and deceleration. Note: Halseahs, choose the throtto will look to the position.
Item ComponentMain Part MethodEvery 3 monthsEvery 6 months over 500 km (30 miles)Every 1 year or every 1000 km (501 miles)Every 2 years or every 10,000 km (241 miles)
Function inspectionFaults detectionAfter connecting with the Dogway Nicotine pipe:1) Update the tire manufacturer to the latest version2) Check if the modification of the corresponding error code and possible causes will prompt when the警示 detects an error
ChargingChange the selector:1) Check if the current battery power displays on the dashboard2) Check the LED indicator on the battery charger. Charging: red, fully charged, green
Control buttonsPress or toggle the button 3 times without failure
TurningTest with wet turns on night turns (the steering angle is 60°). No resistance or ag when turning.
Important partsBattery assemblyThe battery needs to be reassembled when it is changed and the discoloration for 500 times or the total mileage is more than 10,000 km (611 miles).Note: If recommended during operation every 60 days for long term storage.
Controller
Hub motor
Functional partsRear wheel assemblyA motor 2 years' or 10,000 km/6 24 h "passer-by" trip lasting the automobile part of the sideboard, have to be replaced immediately.
Tractioner & brake lever
Front fork assembly
Folding mechanism
Drumbrake
Doorboard Cover

Trademark

Ninebot is the trademark of Ninebot (Belling) Tech Co., Ltd; Segway and the Rider Design are the registered trademarks of Segway Inc., App Store, Apple Logo, Apple, Apple Find My, Apple Watch. Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are trademarks of Apple Inc. iOS is a trademark of Cisco and is used under license. Android, Google Play and the Google Play logo are trademarks of Google LLC. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Segway-Ninebot is under license. Other Trademarks and trade names are those of their respective owners.

The KickScooter is covered by relevant patents. For patent information, go to http://www.segway.com

We have attempted to include descriptions and instructions for all the functions of the KickScooter at the time of printing. However, due to constant improvement of product features and changes of design, your KickScooter may differ slightly from the one shown in this document. Scan the QR code or visit the Apple App Store (iOS) or the Google Play Store (Android) to download and install the App.

Please note that there are multiple Segway and Ninebot models with different functions, and some of the functions mentioned herein may not be applicable to your unit. The manufacturer reserves the right to change the design and functionality of the KickScooter product and documentation without prior notice.

© 2023 Ninebot (Beijing) Tech Co. Ltd. All rights reserved.

The Segway-Ninebot App can support KickScooter with built-in Bluetooth

Common Failures

Possible causes/Errors code Solution
10 Bluetooth communication failureCheck the correction of dashboard communication wire and control cable, or contact after sales service or an authorized dealer.
11Anommal IA phase current sampling of motorPlease contact after-sales service or an authorized dealer.
12Anommal IB phase current sampling of motorPlease contact after-sales service or an authorized dealer.
13Anommal IO phase current sampling of motorPlease contact after-sales service or an authorized dealer.
14 Abnormal UHz Hall samplingCheck whether the throttle is pressed when powered on, or contact after-sales service or an authorized dealer.
15 Abnormal brake hall samplingCheck whether the brake lever is squeezed when powered on, or contact after-sales service or an authorized dealer.
18 Abnormal motor hall signalCheck whether the hall socket is loose, or contact after-sales service or an authorized dealer.
21 Battery communication failureCheck whether the wire connected with the battery communication wire and controller is loose, or contact after-sales service or an authorized dealer.
23 Default battery SN Please contact after sales service or an authorized dealer
24 Abnormal ice fault voltageCheck whether the connection wire of battery to controller is loose, or contact after-sales service or an authorized dealer.
26 Abnormal car writing/reading Please contact after sales service or an authorized dealer
31 Incorrect IT AL operation Please contact after-sales service or an authorized dealer
35 Default Kick Scooter Check whether KickScooter still keeps default SN.
35 Abnormal be icy temperatureCheck the working environment of battery, or contact after sales service or an authorized dealer.
40 Abnormal controller NGCovers hot end controller, or contact a lost/sick service or an authorized dealer.
41 Abnormal motor NTC Please contact after sales service or an authorized dealer
45Abnormal mother wire current samplingPlease contact after sales service or an authorized dealer.

SEGWAY Ninebot KickScooter MAX G2 E - Trademark - 1
7 Wiring Diagram

SEGWAY Ninebot KickScooter MAX G2 E - Trademark - 2
Diagramme

Amsterdam, The Netherlands

Amsterdam, The Netherlands

Modaithd guad to doxipib Ie differentimodie La vlocil mssmae laeg

BN Amsterdam, The Netherlands

Note:请注意 program may require manualization of addendum notes to the X00b1 file.

Artinls CarrieraVetodniu dinamnistrzneGmni 2 mesiCmni 6 mesi 6cmCmni 10cm cmi 10cm (500cm)Cmni 15cm cmi 15cm (621 mm)Cmni 18cm cmi 18cm (6214 mm)
Manizencor cort manifereParti dommainfameUtilizeare un paracr morte e umido cor purla, imai-fnme.√√√
Provisiono duniamationGarlile gamme a 47-48pm√√√
Uromodil duniamationControlare se promotori son immali, reformal, uroreterale parieti.
Vitulaiusale supporella sidaSerrare le vit fissate con ilimnuno cnpocca, lacoppa suportare di #3-4, #5, #8.
Serrare la vit sull'opercatorio, c copce compliscare di 3,9+0,06 Nm Stirgente le vit sulle lave dei foia, I r copperie prograsse di 4±2,1Nm Stirgente le vit sulle parti superiore colo steo, La copia supposte di #3-4, #5, #8.
Vitulaiu meccanias sugheveteSerrare le vit fissate colo maniella cogressione e colar colle anterioe Dura et laterale lativa, la copce comprottatae 5=1% in Pegare da disagnoe, a visorvticke supponore le copce araccornandae #5=1% in Pegare la tese ai finisse li stelle nela cundice sicondiola sulbici, Laplegia isca serenza scudire.
ModelsModeloMax G2 E Max G2 D
ECO (modulated energy efficiency)15 kJ/h (9.3 mP)16 kJ/h (9.3 mP)
D (determined by modeler)20 km/h (12.4 mph)20 km/h (12.4 mph)
S (modulated depot [w])25 km/h (15.5 mph)20 km/h (12.4 mph)

Bluetooth E Icoro nds quelpatine se ha contentado dispositio movi crtactamente.

ModelsModelMax G2 E Max G2 D
ECO (turbine combustion engine)16 km/h (8.3 mph)15 km/h (9.3 mph)
D (troy standard汽油)20 km/h (12.4 mph)20 km/h (12.4 mph)
S (eco-depictive)25 km/h (16.3 mph)20 km/h (12.4 mph)

Amsterdam, The Netherlands

Segway-Ninebot Europe

Radio Equipment Regulations 2017

Supply of Machinery (Safety) Regulations 2008

Segway-Ninebot Europe

Dynamostraat 7,1014 BN AmesterdA. Pases Baixos.

Ninebit (Changzhou) Tech Co., Ltd. declares that no products or products in the market are available for sale. Ninebit has a direct relationship with the manufacturer, and it is responsible for the product's marketing and distribution.

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SEGWAY

Model : Ninebot KickScooter MAX G2 E

Category : Electric scooter