WG252E.9 - Hedge trimmers WORX - Free user manual and instructions

Product type	Cordless pole hedge trimmer
Brand	Worx
Model	WG252E.9
Rated voltage	20 V max (18 V nominal)
Battery type	Lithium-ion, 2.0 Ah (WA3551)
Charger	WA3880, input 100-240 V ~ 50/60 Hz, output 20 V 2.0 A
No-load speed	1,340 rpm
Cutting length	45 cm
Max. cutting diameter	16 mm
Overall length (min./max.)	1.3 m to 1.8 m (telescopic pole)
Total reach	3.2 m
Cutting head rotation angle	-45° to +90° (10 positions)
Handle rotation angle	180°
Machine weight	3.2 kg
Sound pressure level (LpA)	79 dB(A) (K=3 dB(A))
Sound power level (LwA)	89.2 dB(A) (K=3 dB(A))
Vibrations (total value)	2.56 m/s² (K=1.5 m/s²)
Recommended protective equipment	Gloves, safety glasses, hearing protection, non-slip shoes
Blade maintenance	Lubrication with WD-40 oil
Cleaning	Dry cloth only, no water or solvents
Repairability	Have it serviced by a qualified repairer; no user-serviceable parts
Included accessories	Battery (WA3551), charger (WA3880), blade protector sheath, shoulder strap

Frequently Asked Questions - WG252E.9 WORX

How to start the Worx WG252E.9 hedge trimmer?

To start, insert the charged battery into the compartment. Then hold down the safety lock while pressing the on/off switch. Release the lock after starting. To stop, simply release the switch.

How to adjust the cutting head angle?

The head angle is adjusted by operating the cutting head release lever while turning the head to the desired angle (from -45° to +90° in 10 positions). Make sure the head is locked before use.

Which battery to use with the WG252E.9?

Use exclusively the supplied Worx WA3551 battery (Lithium-ion 20 V, 2.0 Ah). Never use any other battery, as it could damage the tool or cause a fire hazard.

How to clean the hedge trimmer after use?

First remove the battery. Clean the device with a dry cloth to remove dust and cutting residues. Never use water or chemicals. Keep the ventilation slots clean.

What to do if the blade jams during cutting?

Release both switches immediately to stop the tool. Remove the battery. Use gloves to clear the blade of debris. Check that the blade is not damaged before restarting.

How to transport the hedge trimmer safely?

Always remove the battery. Attach the supplied blade protector. Use the shoulder strap by placing it over one shoulder so you can quickly detach it if needed.

What protective equipment is recommended?

Wear sturdy gloves, safety glasses, hearing protection (sound level can reach 89 dB(A)), and non-slip shoes. A hard hat may be useful when working at height.

How to extend the hedge trimmer pole?

Unlock the pole locking button and pull the inner pole to the desired length (from 1.3 m to 1.8 m). Tighten the button to lock. Do not exceed the maximum length.

How to install and remove the battery?

To install: slide the battery into the compartment until it clicks. To remove: press the battery pack lock and pull the battery backwards. Always do this before any maintenance.

How to store the hedge trimmer at the end of the season?

Remove the battery and charge it to about 50% for storage. Clean the tool, lubricate the blade with WD-40 and reattach the blade protector. Store the device in a dry, frost-free place.

USER MANUAL WG252E.9 WORX

Technical line drawing of a mechanical tool or device with a long handle and chain (no text or symbols)

20V Cordless Pole Hedge Trimmer	EN	P07
20V Akku- Pole-Heckenschere	D	P13
Tondeuse à haie sans fil 20V	F	P21
Tagliasiepi a palo senza fili 20V	I	P28
Recortadora de setos de poste inalámbrico de 20V	ES	P36
Aparador de cerca viva sem fio 20V	PT	P43
20V draadloze heggenschaar	NL	P51
20V trådløs hedge trimmer	DK	P58
20V Johdoton Napa Pensasleikkuri	FIN	P65
20V trådløs hekktrimmer	NOR	P72
20V trådløs häcktrimmer	SV	P78
20V akumulatorowe nożyce do żywopłotu	PL	P85
Безжичен тример за жив плет 20V	BG	P92
20 V vezeték nélküli sövényvágó	HU	P100
20V Masina de tuns fara fir	RO	P107
20V akumulátorové nužky na živé ploty	CZ	P114
20V akumulátorové nožnice na živé ploty	SK	P121
20V brezżicni trimer za živo mejo	SL	P128

Original instructions EN
Originalbetriebsanleitung	D
Notice originale F
Istruzioni originali I
Manual original ES
Manual original PT
Oorspronkelijke gebruiksaanwijzing NL
Original brugsanvisning DK
Alkuperäiset ohjeet	FIN
Original driftsinstruks NOR
Bruksanvisning i original SV
Instrukcja oryginalna PL
Оригинална инструкция	BG
Eredeti használati utasítás HU
Instrucțiuni originale	RO
Původní návod k používání	CZ
Pôvodný návod na použitie	SK
Izvirna navodila SL

Technical diagram of a mechanical tool with numbered parts for identification and assembly reference.

A1 POWER STAIRS

A2 POWER SANS

A3 100% 0%

A4

B1 CLICK 2 3 7

B2 1 2 3

Diagram illustrating safety harnesses and safety symbols with Chinese labels

D 2 7 3

E 1 2 2

F No Hand No Hand Car

G ←

H POWER SHARE 1 2

11

12

Diagram illustrating handwashing and cleaning tools with icons for gloves, no gloves, and a water drop.

PRODUCT SAFETY GENERAL POWER TOOL SAFETY WARNINGS

WARNING Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3. Personal safety

a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of

inattention while operating power tools may result in serious personal injury.

b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4. Power tool use and care

a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5. Battery tool use and care

a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

6. Service

a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

ADDITIONAL SAFETY WARNINGS

1. Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to be cut when blades are moving. Make sure the switch is off when clearing jammed material. A moment of inattention while operating the hedge trimmer may result in serious personal injury.
2. Carry the hedge trimmer by the handle with the cutter blade stopped. When transporting or storing the hedge trimmer always fit the cutting device cover. Proper handling of the hedge trimmer will reduce possible personal injury from the cutter blades.
3. Hold the power tool by insulated gripping surfaces only, because the cutter blade may contact hidden wiring. Cutter blades contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.

IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE

Safe operating practices

1. Training

Become familiar with the owner's manual before attempting to operate the equipment.

2. Preparation

a) THIS HEDGE TRIMMER CAN CAUSE SERIOUS INJURIES. Read the instructions carefully for the correct handling, preparation, maintenance, starting and stopping of the hedge trimmer. Become familiar with all controls and the proper use of the hedge trimmer.
b) Never allow children to use the hedge trimmer.
c) Beware of overhead power lines.
d) Avoid operating while people, especially children, are nearby.
e) Dress properly! Do not wear loose clothing or jewellery, which can be caught in moving parts. Use of sturdy gloves, non-skid footwear and safety glasses is recommended.
f) If the cutting mechanism strikes any foreign object or the hedge trimmer starts making any unusual noise or vibration, shut off the power source and allow the hedge trimmer to stop. Take the following steps: inspect for damage; check for, and tighten, any loose parts; have any damaged parts replaced or repaired with parts having equivalent specifications.

3. Operation

a) Remove battery pack before cleaning or when clearing a blockage; checking, carrying out maintenance or working on the hedge trimmer; adjusting the working position of the cutting device; leaving the hedge trimmer unattended;

b) Ensure that the hedge trimmer is correctly located in a designated working position before starting the motor.
c) While operating the hedge trimmer, always ensure that the operating position is safe and secure, especially when using steps or a ladder.
d) Do not operate the hedge trimmer with a damaged or excessively worn cutting device.
e) Always ensure that all handles and guards are fitted when using the hedge trimmer. Never attempt to use an incomplete hedge trimmer or one fitted with an unauthorized modification.
f) Always use two hands to operate a hedge trimmer fitted with two handles.
g) Always be aware of your surroundings and stay alert for possible hazards of which you may not be aware due to the noise of the hedge trimmer.

4. Maintenance and storage

a) When the hedge trimmer is stopped for servicing, inspection or storage, remove battery pack form

the machine and make sure all moving parts have come to a stop. Allow the hedge trimmer to cool before making any inspections, adjustments, etc.

b) Always allow the hedge trimmer to cool down before storing.
c) When transporting or storing the hedge trimmer, always fit the cutting device transport guard.

SAFETY WARNINGS FOR BATTERY PACK

a) Do not dismantle, open or shred cells or battery pack.
b) Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
c) Do not expose battery pack to heat or fire. Avoid storage in direct sunlight.
d) Do not subject battery pack to mechanical shock.
e) In the event of battery leaking, do not allow the liquid to come into contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
f) Seek medical advice immediately if a cell or battery pack has been swallowed.
g) Keep battery pack clean and dry.
h) Wipe the battery pack terminals with a clean dry cloth if they become dirty.
i) Battery pack needs to be charged before use. Always refer to this instruction and use the correct charging procedure.
j) Do not maintain battery pack on charge when not in use.
k) After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance.
I) Battery pack gives its best performance when it is operated at normal room temperature (20 °C ± 5 °C).
m) When disposing of battery packs, keep battery packs of different electrochemical systems separate from each other.
n) Recharge only with the charger specified by Worx. Do not use any charger other than that specifically provided for use with the equipment. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
o) Do not use any battery pack which is not designed for use with the equipment.
p) Keep battery pack out of the reach of

children.

q) Retain the original product literature for future reference.
r) Remove the battery from the equipment when not in use.
s) Dispose of properly.
t) Do not mix cells of different manufacture, capacity, size or type within a device.
u) Do not remove battery pack from its original packaging until required for use.
v) Observe the plus (+) and minus (−) marks on the battery and ensure correct use.

SYMBOLS

	To reduce the risk of injury, user must read instruction manual
	Warning
	Wear ear protection
	Wear eye protection
	Wear dust mask
	Wear head protection
	protective gloves
	protective footwear
	Keep hands away from blade
	Do not expose to rain

	Keep sufficient distance away from electrical power lines
	Keep bystanders away
	Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check with your local authorities or retailer for recycling advice.
	Li-lon battery This product has been marked with a symbol relating to 'separate collection' for all battery packs and battery pack. It will then be recycled or dismantled in order to reduce the impact on the environment. Battery packs can be hazardous for the environment and for human health since they contain hazardous substances.
	Do not burn
	Batteries may enter water cycle if disposed improperly, which can be hazardous for ecosystem. Do not dispose of waste batteries as unsorted municipal waste.
	Remove battery from the socket before carrying out any adjustment, servicing or maintenance.
	Lock
	Unlock

COMPONENT LIST

1. EXTENSION POLE HANDLE

2. EXTENSION POLE LOCK-OFF BUTTON

3. EXTENSION POLE ROTATION BUTTON

4. SHOULDER STRAP HOOKS
5. HOOK ADJUSTMENT KNOB
6. TRIMMER HEAD LOCKING-BUTTONS
7. ROTATIONAL BUTTON
8. BLADE
9. TRIMMER HEAD RELEASE LEVER
10. INNER POLE
11. INNER POLE RELEASE LEVER
12. ON/OFF SWITCH
13. BATTERY PACK RELEASE BUTTON *
14. BATTERY PACK *
15. BLADE SHEATH
16. SHOULDER STRAP

*Not all the accessories illustrated or described are included in standard delivery.

TECHNICAL DATA

Type WG252E WG252E.9

(250-299- designation of machinery, representative of cordless hedge trimmer)

*Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts. Nominal voltage is 18 volts.

	WG252E WG252E.9
Voltage	20 V-Max**
No-load speed	1340 /min
Max.cutting length	45 cm
Cutting diameter	16 mm
Machine length	From 1.3 m to 1.8 m (fully extended)
Trimmer head rotation angle	-45 to 90 degrees (10 positions)
Handle rotation angle	180 degrees total
Total reach	3.2 m
Battery capacity	2.0 Ah (WA3551)	/
Battery type	Lithium-Ion /
Charger model	WA3880 /
Charger rating	Input: 100-240 V ~ 50/60 Hz, Output: 20 V , 2.0 A	/
Charging time (approx.)	58 mins /
Machine Weight	3.6 kg 3.2 kg

NOISE INFORMATION

A weighted sound pressure	L_pA = 79 dB(A) K_pA = 3 dB(A)
A weighted sound power	L_wA = 89.2 dB(A) K_wA = 3 dB(A)
Wear ear protection

VIBRATION INFORMATION

Vibration total values (triax vector sum)determined according to EN 60745:

Vibration emission value: a_h = 2.56 m/s^2

Uncertainty K = 1.5 m/s ^2

The declared vibration total value may be used for comparing one tool with another, and may also be used in a preliminary assessment of exposure.

WARNING: The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used dependant on the following examples and other variations on how the tool is used: How the tool is used and the materials being cut or drilled.

The tool being in good condition and well maintained The use the correct accessory for the tool and ensuring it is sharp and in good condition.

The tightness of the grip on the handles and if any anti vibration accessories are used.

And the tool is being used as intended by its design and these instructions.

This tool may cause hand-arm vibration syndrome if its use is not adequately managed.

WARNING: To be accurate, an estimation of exposure level in the actual conditions of use

should also take account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle but not actually doing the job. This may significantly reduce the exposure level over the total working period.

Helping to minimise your vibration exposure risk.

ALWAYS use sharp chisels, drills and blades

Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)

If the tool is to be used regularly then invest in anti vibration accessories.

Plan your work schedule to spread any high vibration tool use across a number of days.

ACCESSORIES

	WG252E WG252E.9
Battery pack (WA3551)	1 /
Charger (WA3880) 1 /
Blade sheath 1
Shoulder strap 1
Hedge trimmer attachment (WA0308)	1

We recommend that you purchase your accessories listed in the above list from the same store that sold you the tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice.

OPERATING INSTRUCTIONS

NOTE: Before using the tool, read the instruction book carefully.

Intended Use

The machine is intended for cutting and trimming hedges and bushes in domestic use.

ACTION FIGURE
BEFORE OPERATION
Installing the battery pack See Fig.A1
Removing the battery pack	See Fig.A2
Checking the battery conditionNOTE: Fig. A3 only applies for the battery pack with the battery indicator light.	See Fig.A3
Charging the battery packMore details can be found in charger's manual	See Fig.A4
ASSEMBLY
Attaching and releasing the extension pole	See Fig.B1, B2
Attaching and adjusting the shoulder strapIt is recommended to always attach the shoulder strap when using the tool.Adjust the shoulder strap to obtain a comfortable working position.IMPORTANT: Never attach the strap diagonally across your shoulder and your breast, but rather place it on one of your shoulders. In this way you can remove the tool quickly from your body in case of danger.	See Fig. C
Extending the inner pole See Fig. D
Rotating rear handleNOTE: The cutting angle can be adjusted between 0°-90° left or right.WARNING: Always make sure that the handle is locked in the desired position before operation. Do not rotate the handle when the trimmer is being operated.	See Fig. E
Adjusting the head angleWARNING: Failure to properly secure the trimmer head may result in personal injury and/or property damage.	See Fig. F
OPERATION
Removing the blade sheath See Fig. G
Starting and Stopping See Fig. H
Top cuttingWARNING: If any parts are missing, damaged or broken, do not operate your hedge trimmer until all damaged parts have been replaced or repaired.Failure to do so could result in serious personal injury.	See Fig. I1
Side cuttingWARNING: Stop operating the trimmer before rotating the handle.	See Fig. I2
Lubricating the cutting bladeNOTE: It is important to use only the recommended standard lubricating oil (WD-40) to avoid damage to the blade.	See Fig. J

HOW TO USE YOUR HEDGE TRIMMER

Before cutting an area, inspect it first and remove any foreign objects that could become thrown or entangled in the blades.

Always hold the trimmer with both hands and with the blade away from you before turning it on.

When trimming new growth, use a wide sweeping action so that the stems are fed directly into the blade.

Allow the cutting blades to reach full speed before cutting. When operating, keep the cutting blades away from people and objects such as walls, large stones, trees, vehicles, etc.

If the blade stalls, immediately stop the trimmer.

Release the two Switch Levers before attempting to clear jammed debris from the cutting blades.

Wear gloves when trimming thorny or prickly growth. Do not attempt to cut stems that are too thick for the cutting blade.

Top cutting

Use a wide sweeping motion. A slight downward tilt of the cutting blades in the direction of motion gives the best cutting results.

Side cutting

When trimming the sides of the hedge, begin at the bottom and cut upwards, tapering the hedge inward at the top. This shape will expose more of the hedge, resulting in a more uniformed growth.

MAINTENANCE

Remove the battery from hedge trimmer before carrying out any adjustment, servicing or maintenance.

There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth.

Always store your power tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free of dust.

ENVIRONMENTAL PROTECTION

Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check with your

Local Authority or retailer for recycling advice.

DECLARATION OF CONFORMITY

We,

POSITEC Germany GmbH

Grüner Weg 10, 50825 Cologne, Germany

Declare that the product

Description 20V Cordless Pole Hedge Trimmer

Type WG252E WG252E.9 (250-299 -

designation of machinery, representative of cordless hedge trimmer)

Function Trimming hedges and brushes

Complies with the following Directives:

2006/42/EC

2014/30/EU

2011/65/EU&(EU)2015/863

2000/14/EC amended by 2005/88/EC

2000/14/EC amended by 2005/88/EC:

- Conformity Assessment Procedure as per Annex V

- Measured Sound Power Level 89.2 dB (A)

- Declared Guaranteed Sound Power Level 92 dB (A)

Standards conform to,

EN 60745-1

EN ISO 10517

EN ISO 3744

EN 55014-1

EN 55014-2

The person authorized to compile the technical file, Name Marcel Filz

Address Positec Germany GmbH Grüner Weg 10, 50825 Cologne, Germany

M A

2020/05/28

Allen Ding

Deputy Chief Engineer, Testing & Certification

Positec Technology (China) Co., Ltd

18, Dongwang Road, Suzhou Industrial

Park, Jiangsu 215123, P. R. China

Vibrationsemissionswert: a_n = 2.56 m/s^2

18, Dongwang Road, Suzhou Industrial

Park, Jiangsu 215123, P. R. China

SÉCURITÉ DU PRODUIT AVERTISSEMENTS GÉNERAUX DE SÉCURITÉ POUR L'OUTIL

INFORMATIONS RELATIVES AU BRUIT

INFORMATIONS RELATIVES AUX VIBRATIONS

WG252E WG252E.9 (250-299

18, Dongwang Road, Suzhou Industrial

Park, Jiangsu 215123, P. R. China

SICUREZZA DEL PRODOTTO AVVISI GENERALI PER LA SICUREZZA DEGLI UTENSILI A MOTORE

18, Dongwang Road, Suzhou Industrial

Park, Jiangsu 215123, P. R. China

Modelo WG252E WG252E.9 (250-299 -

18, Dongwang Road, Suzhou Industrial

Park, Jiangsu 215123, P. R. China

SEGURANÇA DO PRODUTO AVISOS GERAIS DE SEGURANÇA DE FERRAMENTAS ELÉCTRICAS

Tipo WG252E WG252E.9 (250-299

18, Dongwang Road, Suzhou Industrial

Park, Jiangsu 215123, P. R. China

PRODUCTVEILIGHEID ALGEMENE VEILIGHEIDSWAARSCHUWINGEN VOOR VERMOGENSMACHINE

18, Dongwang Road, Suzhou Industrial

Park, Jiangsu 215123, P. R. China

PRODUKTSIKKERHED GENERELLE ADVARSLER I FORBINDELSE MED MASKINVÆRKTOJ

Type WG252E WG252E.9 (250-299-

Deputy Chief Engineer, Testing & Certification

Positec Technology (China) Co., Ltd

18, Dongwang Road, Suzhou Industrial

Park, Jiangsu 215123, P. R. China

TUOTETURVALLISUUS MOOTTORITYÖKALUN YLEISET

TURVALLISUUSVAROITUKSET

Deputy Chief Engineer, Testing & Certification

Positec Technology (China) Co., Ltd

18, Dongwang Road, Suzhou Industrial

Park, Jiangsu 215123, P. R. China

RODUKTSIKKERHET GENERELLE SIKKERHETS-ADVARSLER FOR ELEKTROVERKTOY

Deputy Chief Engineer, Testing & Certification

Positec Technology (China) Co., Ltd

18, Dongwang Road, Suzhou Industrial

Park, Jiangsu 215123, P. R. China

PRODUKTSÄKERHET GENERELLA SÄKERHETSVARNINGAR FÖR ELVERKTYG

Type WG252E WG252E.9 (250-299-

18, Dongwang Road, Suzhou Industrial

Park, Jiangsu 215123, P. R. China

BEZPIECZEŃSTWO PRODUKTU OGÓLNE OSTRZEŻENIA DOTYCZĄCE BEZPIECZEŃSTWA PODCZAS PRACY Z ELEKTRONARZĘDZIAMI

Typ WG252E WG252E.9 (250-299

18, Dongwang Road, Suzhou Industrial

Park, Jiangsu 215123, P. R. China

ОРИГИНАЛНА ИНСТРУКЦИЯ БЕЗОПАСНОСТ НА ПРОДУКТА

ОБЩИ

ПРЕДУПРЕЖДЕНИЯ

ЗА БЕЗОПАСНОСТ

НА ЕЛЕКТРИЧЕСКИ

ИНСТРУМЕНТИ

ПРЕДУПРЕЖДЕНИЕ Прочетете

Tun WG252E WGWG252E.9 (250-299 -

18, Dongwang Road, Suzhou Industrial

Park, Jiangsu 215123, P. R. China

TERMÉKBIZTONSÁG ELEKTROMOS KÉZISZERSZÁMOK BIZTONSÁGOS HASZNÁLATÁVAL KAPCSOLATOS ÁLTALÁNOS FIGYELMEZTETÉSEK

18, Dongwang Road, Suzhou Industrial

Park, Jiangsu 215123, P. R. China

SECURITATEA PRODUSULUI AVERTISMENTE GENERALE DE SIGURANTĂ PEN UNELTE ELECTR

18, Dongwang Road, Suzhou Industrial

Park, Jiangsu 215123, P. R. China

BEZPEČNOST VÝROBKU OBECNÁ BEZPEČNOSTNÍ UPOZORNĚNÍ PRO ELEKTRICKÉ NÁSTROJE

18, Dongwang Road, Suzhou Industrial

Park, Jiangsu 215123, P. R. China

BEZPEČNOST VÝROBKU

VŠEOBECNÉ

BEZPEČNOSTNÉ

VAROVANIA NA

POUŽÍVANIE

ELEKTRICKÉHO

NÁRADIA

18, Dongwang Road, Suzhou Industrial

Park, Jiangsu 215123, P. R. China

VARNOST IZDELKA SPLOŠNA VARNOSTNA NAVODILA ZA ELEKTRIČNA ORODJA

Vrsta izdelka WG252E WG252E.9 (250-299-

18, Dongwang Road, Suzhou Industrial

Park, Jiangsu 215123, P. R. China

WORX

it's your nature

www.worx.com

Copyright © 2020, Positec. All Rights Reserved.