BP.604 - Blender Beper - Free user manual and instructions

USER MANUAL BP.604 Beper

Precautlons Read the following instructions carefully, since they give you useful safety information about installation, use and maintenan- ce and help you avoid mishaps and possible accidents. Remove the packing and make sure that the appliance is intact, with special attention to the supply cable. The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources. It is recommended not to throw these packing ma- terial in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually infor- mation to the manager of the Sanitation Department of your own mu- nicipality. If the supply cord is damaged, it must be replaced by the manufac- turer, its service agent or similarly qualied persons in order to avoid a hazard. Before connecting the appliance make sure that the mains voltage corresponds to the data specied on the label. The appliance can be damaged if the voltage is not correct. If the plug does not suit the socket, let it be replaced with another suitable plug by qualied personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption. Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded. Do not use the appliance if the cable or the plug shows any damages. Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized Beper after-sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance. This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manu- facturer cannot be responsible for any damages deriving from impro- per, wrong or incautious use.Blender Use instructions

This appliance is for household use only. To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other uids. Do not use the appliance near explosives, highly ammable mate- rials, gases or burning ames. Do not allow children, disabled people or every pe- ople without experience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance used by or near children. Description Fig.A

2. Gratuated jar 500 ml

3. Stainless steel blades

4. Security closure system

8. Non-skid feet support

Instructions for use Before using the blender for the rst time, completely remove the packing. Place the blender on a stable and horizontal surface ; the non-skid feet support (9) will allow to keep it xed on the table. Put the graduated jar (2) on the motor unit (5); turn clockwise to x it on the motor unit. The blender only works if the graduated jar is correctly x on the motor unit, this is the security closure system (4). Cut the food in pieces and put them into the graduated jar (2) until maximum level (indicated on the jar). Close the jar with the lid (1). Plug the cord supply (7) to the socket. Press on (6) to make the blades move (3). Respect a continuous time of max. 30 secondes when the blender is working. Do not put ngers or other objects into the jar or near to the blades when the blender is working. When nished, switch off the blender with switch on/off (6) and unplug from the socket. Cleaning Before cleaning, unplug the plug from the socket. Do not immerge the motor unit into water and do not let under water spray. Clean the motor unit with a soft wet cloth. Clean all the other parts (jar, lid, cap) with water and detergent and dry all the parts. Do not use abrasive products, metallic sponge that could damage the blender. Before storing the blender, make sure every parts are dry. Keep the blender in a dry and clean place. Technical data Power : 200-300W Power supply. 220-240V ~ 50-60Hz For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.Blender Use instructions

The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected. GUARANTEE CERTIFICATE This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee ap- plies to material and production defects. The purchase receipt and the guarantee certicate must be submitted together in case of claim to guarantee. The guarantee is valid only with a guaranty certicate and proof of purchase (scal receipt) indicating the date of purchase and the model of the appliance For any technical assistance, please contact directly the seller or our head ofce in order to preserve the applian- ce’s efciency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee. GUARANTEE CONDITIONS If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that: - The appliance has been used properly and for the purpose for which it has been intended. - The appliance has not been tampered with, otherwise it is not maintainable. - The purchase receipt shall be presented. - The appliance showing a fair wear and tear shall not be covered by this guarantee. Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier. For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge. In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beper reserves the right to replace only the very part in question and not the entire product Contact your distributor in your country or after sales department beper. E-mail [e-mail] which will forward your enquiries to your distributor.Mixer Manuel d’instructions