BSB 18 - Drill Güde - Free user manual and instructions

USER MANUAL BSB 18 Güde

Blue and black electric drill put tool with red handle and white caliper (no visible text or symbols)

BS 18
58500 / 58501 / 58502

3D model of a blue and red GUCU power tool with black handle and red buttons (no text or symbols)

BSB 18
58503 / 58504

ENGLISH Please read the instructions carefully before starting the machine.

Scanned document with Chinese text and a blue circular logo, likely a software interface or report.

BS 18

Blue and red electric drill put tool with attached plastic clip (no text or symbols visible)

BSB 18

3D rendered illustration of a blue and black Gude electric drill (no text or symbols)

DE Inbetriebnahme

EN Starting-up the machine

FR Mise en service

Close-up of a blue mechanical component with a white clamp and dashed line indicating a measurement or alignment (no text or symbols visible)

DE Inbetriebnahme
EN Starting-up the machine
FR Mise en service
IT Messa in funzione
NL Inbedrijfstelling
CZ Uvedení do provozu
SK Uvedenie do prevádzky
HU Üzembe helyezés

Person wearing a black and gray outfit with a blue handheld device attached (no text or symbols visible)

3D mechanical assembly diagram showing a blue tool and a gray bracket with a screwdriver inserted (no text or symbols)

Close-up of a blue mechanical component with a white plastic clip attached (no text or symbols visible)

Person wearing a belt holding a small blue and black device (no text or symbols visible)

3D rendering of a blue mechanical component with a white bracket and a screwdriver inserted, showing a dashed line indicating alignment or connection (no text or symbols present)

Close-up of a blue mechanical component with a white plastic clip attached (no text or symbols visible)

DE Inbetriebnahme

EN Starting-up the machine

FR Mise en service

Black and red handheld battery with a pink contact pad (no visible text or symbols)

58541 18V/1,5 Ah

58542 18V/2,0 Ah

58543 18V/3,0 Ah

58544 18V/4,0 Ah

1

Close-up of a blue and red robotic device with a black battery component being inserted, showing a white plastic clip (no text or symbols visible)

2

CLICK

Close-up of a blue and black robotic device with red and white buttons (no visible text or symbols)

1

Close-up of a blue and red robotic device with a key inserted, showing no text or symbols.

2

Black and red handheld battery pack (no visible text or symbols)

Close-up of a blue and black mechanical component with a white bracket and arrow indicator (no text or symbols)

Illustration of a hand pressing a button on a black electronic device (no text or symbols visible)

Close-up of a screwdriver tip interacting with a cylindrical component (no text or symbols visible)

DE Inbetriebnahme
EN Starting-up the machine
FR Mise en service
IT Messa in funzione
NL Inbedrijfstelling
CZ Uvedení do provozu
SK Uvedenie do prevádzky
HU Üzembe helyezés

5815058151

1 3 2

Close-up of a drill bit with a black and white screw, showing internal components and a lock icon (no text or symbols)

Close-up of a blue electric drill bit with a 90-degree angle indicator and a green checkmark (no text or symbols on the tool itself)

DE Betrieb

EN Operation

FR Fonctionnement

IT Esercizio

NL Gebruik

CZ Provoz

SK Prevádzka

HU Üzemeltetés

START STOP

Close-up of a blue and black electric drill bit with a red handle (no text or symbols visible)

START

BS 18 BSB 18

Close-up of a blue and black industrial vacuum cleaner with red and white buttons (no visible text or symbols)

STOP BS 18 BSB 18

Close-up of a blue and black handheld device with a red control knob and white plastic clip (no visible text or symbols)

BS 18 BSB 18

Close-up of a blue mechanical component with a red plastic pad (no text or symbols visible)

DE Betrieb
EN Operation
FR Fonctionnement
IT Esercizio
NL Gebruik
CZ Provoz
SK Prevádzka
HU Üzemeltetés

Simple illustration of a turtle and a rabbit with a shaded triangular background (no text or symbols)

1

3D rendering of a blue and black electric drill with screwdriver and handle (no text or symbols visible)

2

3D rendering of a blue and black electric drill with a white arrow pointing to the drill bit (no text or symbols visible)

DE Betrieb

EN Operation

FR Fonctionnement

IT Esercizio

NL Gebruik

CZ Provoz

SK Prevádzka

HU Üzemeltetés

Close-up of a red and blue plastic object on a blue surface (no text or symbols visible)

Illustration of a hand holding a blue handheld device with arrows indicating motion or movement, no text or symbols present.

Never use the gear switch whilst the machine is operating. Only use the switch when the machine is at a standstill.

Close-up of a drill bit with a screw inserted (no text or symbols visible)

R 12 R

Diagram of a blue and black drill bit with labeled screw and key components, showing tool path and rotation indicator.

DE Betrieb

EN Operation

FR Fonctionnement

IT Esercizio

NL Gebruik

CZ Provoz

SK Prevádzka

HU Üzemeltetés

Close-up of a metallic drill bit being inserted into a wooden surface (no text or symbols visible)

Hand-drawn sketch of a human ear with a red X mark indicating a prohibition or rejection symbol.

BS 18

1-16 16

Illustration of a drill bit being inserted into a wooden block, showing tool path and component details (no text or symbols)

Close-up of a wooden screw being cut with a metallic drill bit (no text or symbols visible)

DE Betrieb

EN Operation

FR Fonctionnement

IT Esercizio

NL Gebruik

CZ Provoz

SK Prevádzka

HU Üzemeltetés

Hand-drawn sketch of a hand with a red 'X' crossed out, indicating a prohibition or rejection symbol.

BSB 18

1 - 16

Illustration of a drill bit being inserted into a wooden block, showing mechanical components and a close-up view (no text or symbols)

Diagram showing a drill bit being inserted into a brick wall, with a close-up view highlighting the process.

Technische Daten

Cordless Drill Driver BS 18
Cordless percussion drill/driver BSB 18
Art. No		58500 / 58501/ 58502	58503 / 58504
Battery voltage 18 V 18 V		---	---
No-load speed 1st gear	2nd gear	0 - 350 min ^-1 0 - 1250 min ^-1	0 - 350 min ^-1 0 - 1250 min ^-1
Rate of percussion under load 1st gear	2nd gear	-	0-5250 min ^-1 0-18750 min ^-1
Torque max. 30 Nm 42 Nm
Drilling capacity max. Steel plate	Woodbrick and tile	10 mm25 mm-	12 mm30 mm8 mm
Screw diameter max. (Wood) 6 mm 8 mm
Drill chuck range 0,8 - 10 mm 2 - 13 mm
Weight without battery/Charging equipment		1,0 kg	1,3 kg
Noise detailsMeasured according to EN 60745; Uncertainty K = 3 dB (A)
Sound pressure level L_pA		84 dB(A)	84 dB(A)
Sound power level L_WA		95 dB(A)	95 dB(A)
Wear ear protectors!
Vibration detailsVibration total values (triaxial vector sum) determined according to EN 60745, Uncertainty K = 1,5 m/s ^2
Drilling into metal: Vibration emission value a_h,D		1,08 m/s ^2	1,55 m/s ^2
Impact drilling into concrete: Vibration emission value a_h,ID		-	7,52 m/s ^2
Screw driving without impact: Vibration emission value a_h		0,59 m/s ^2	0,59 m/s ^2

WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and may increase above the level given in this information sheet.

The vibration emission level may be used to compare one tool with another.

It may be used for a preliminary assessment of exposure.

An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when it is running but not actually in use. This may significantly reduce the vibratory load over the total working period.

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.

Read and understand the operating instructions before using the appliance. Familiarise with the

control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties.

The operator is responsible for accidents or risks to third parties.

Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under supervision of the trainer during occupational education.

In case of any doubts about connection and operation refer please to our customer center

Specified Conditions Of Use

BS 18: The battery drill/screwdriver may be used for drilling and screwdriving for independent use away from mains supply.

BSB 18: The cordless percussion drill/driver is designed for drilling, percussion drilling, as well as screwdriving for independent use away from mains supply.

Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.

Emergency procedure

Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. If you seek help, state the following pieces of information: 1. Accident site, 2. Accident type, 3. Number of injured persons, 4. Injury type(s)

Symbols

WARNING / CAUTION!

WARNING - Read the operating instructions to reduce the risk of injury.

Wear eye protective goggles! Wear ear protectors!

Take the replaceable battery from the appliance before any extension, cleaning and servicing works.

CE marking

Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centres.

Battery

Protect the battery against heat and fire.

Protect the battery against water and moisture.

Protect the battery against temperatures above 40°C.

Do not throw the batteries in household waste.

Deliver the batteries to a collection centre of old batteries where they will be recycled in an environmentally friendly way.

WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

Screwdriver safety warnings

Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a „live“ wire may make exposed metal parts of the power tool „live“ and could give the operator an electric shock.

Drill safety warnings

Wear ear protectors when impact drilling. Exposure to noise can cause hearing loss.

Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.

Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a „live“ wire may make exposed metal parts of the power tool „live“ and could give the operator an electric shock.

Additional Safety and Working Instructions

Use protective equipment. Always wear safety glasses when working with the machine. The use of protective clothing is recommended, such as dust mask, protective gloves, sturdy non-slip footwear and ear defenders.

The dust produced when using this tool may be harmful to health. Do not inhale the dust. Use a dust absorption system and wear a suitable dust protection mask. Remove deposited dust thoroughly, e.g. with a vacuum cleaner.

Do not machine any materials that present a danger to health (e.g. asbestos).

When working in walls ceiling, or floor, take care to avoid electric cables and gas or waterpipes.

Clamp your workpiece with a clamping device. Unclamped workpieces can cause severe injury and damage.

Please turn the device immediately off when the tool used gets blocked! Do not turn the device on again when the tool is still blocked. This could cause bounce back with a high reaction moment. Determine and remove the cause of the blocking of the tool used while respecting the safety instructions.

The possible causes may be:

• it is tilted in the workpiece to be machined
• it has pierced through the material to be machined
  • the power tool is overloaded

Do not reach into the machine while it is running. Chips and splinters must not be removed while the machine is running.

WARNING! Danger of burns

The insertion tool may become hot during use.

• when changing tools
• when setting the device down

The appliance must not be used if damaged or safety equipment is defective. Replace any worn-out and damaged parts.

Do not use the device near flammable liquids or gases. Risk of fire and explosion in case of short circuit.

Do not let any metal parts reach the airing slots - danger of short circuit!

Battery

Risk of fire! Risk of explosion!

Never use damaged, defective or deformed accumulators. Never open or damage the accumulator or let it fall on the ground.

Umgebungstemperatur

Protect the battery against heat and fire.

Battery to be used at the ambient temperatures between 10^ C and +40^ C only.

Never put the battery on heaters and do not expose it to strong sunlight for a long time.

After being subject to heavy load, let the battery cool down first.

Short circuit - do not bridge the accumulator contacts with metal parts.

The accumulator must be packaged (plastic bag, box) or accumulator contacts must be sealed up for accumulator disposal, transport or storage.

The Güde charger to be used only to charge the battery. There can be malfunction or fire if different chargers are used.

Vapours may leak out in case of unauthorised use or when using a damaged accumulator. Bring fresh air and seek medical advice if experiencing difficulties.

Vapours may irritate the respiratory system.

Work instructions

Accumulators are supplied partially charged and must therefore be fully charged before being used for the first time.

• Charge the accumulator when the appliance is running slowly or stops.
• A li-ion battery may be charged at any time without any shortening of its life. Charging process interruption will not damage the accumulator.
• A li-ion battery is protected by the Electronic Cell Protection against deep discharge.
• A significantly shorter operating time of a charged battery means the battery life is over and the battery must be replaced.

Dispose of the batteries in an environmentally friendly manner.

Li-ion batteries are subject to the special disposal obligation. Have any defective batteries disposed of by a specialised shop. The battery must be taken out before the appliance is scrapped. Damaged batteries may harm the environment and your health if toxic vapours or liquids leak out of such batteries. Therefore, never send a defective battery by post, etc. Please contact your local recycling centre.

Dispose of the batteries when discharged. We recommend applying an adhesive tape on the poles to protect them against short circuit. Never open the battery.

Maintenance

⚠️ Take the replaceable battery from the appliance before any extension, cleaning and servicing works.

Repairs and works specified in these Instructions may only be performed by qualified authorised staff.

Use only original accessories and original spare parts.

Keep the device, in particular the air vents, clean at all times. Never spray water on the device body!

Do not clean the plastics with solvents, flammable or toxic fluids. For cleaning, use a damp cloth only.

Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.

If necessary, a list of spare parts can be found at www.guede.com.

WAARSCHUWING / OPGELET!

Translation of the EC-Declaration of Conformity

We, hereby declare the conception and construction of the below mentioned appliances correspond - at the type of construction being launched - to appropriate basic safety and hygienic requirements of EC Directives.

In case of any change to the appliance not discussed with us the Declaration expires.

Cordless percussion drill/driver