Moonstars - Bed BabyGO - Free user manual and instructions

USER MANUAL Moonstars BabyGO

• Suitable for new born baby

• Maximum Load: 13 kgs or height of 85cm tall. WARNING! Read the Instrucon carefully before use and keep them for future reference. IMPORTANT BEFORE ASSEMBLING THIS COT READ AND UNDERSTAND THE INSTRUCTIONS. Do not use maress other than the one supplied by the manufacturer. Incorrect maress can cause death. Use only accessories as recommended by the manufacturer. Ensure the top rails and base are fully locked. Stop using this cot of any part of the cot is broken, torn or missing. KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.

• IMPORTANT: Maresses are included and are designed specically for this cot.

• Do not use any maresses other than the ones supplied by the manufacturer.

• Only use accessories recommended by the manufacturer. Never use substute parts. Ensure the top rails and the base are fully locked before use.

• Stop using this cot if any of the parts of the cot are broken, torn or missing.

• Failure to follow the warnings and instrucons could result in serious injury or death. Contact the manufacturer for replacement parts or instrucons if they are required. Keep children away while assembling/disassembling the cot.

• Do not leave anything on the folding cot (such as toys) that provide a foothold.

• Do not use the cot near naked heat sources, bar heaters, open res or exposed ames.

• Keep the folding cot clear of trailing cables and hanging cords.

• Keep medicaons and small items that a child could choke on, away from the cot.

• Do not use the folding cot if fabric or padding on the side rails or end rails has been bien through. FALL HAZARD:

• To prevent falls, DO NOT use the folding cot once the infant has reached the manufacturer‘s maximum weight of 13kgs or a height of 85cm tall.

• The crib/cradle should be placed on a horizontal oor.

• the crib/cradle should be locked in the xed posion when a child is unsupervised in it

• When a child is able to sit, kneel or to pull itself up, the crib/cradle shall not be used anymore for this child.

• Do not to use the body of a cradle without its frame. SUFFOCATION HAZARD - Infants can suocate:

• In gaps between an extra pad or maress.

• Never leave your child unaended.

• Use this product with only one child at a me.

• To reduce the risk of Sudden Infant Death Syndrome (SIDS), Paediatricians recommend infants to be placed on their backs to sleep, unless otherwise advised by your physician.

Carry CotPARTS IMPORTANT! Please remove all parts from the package and idenfy them before assembly.

1. Remove the travel cot from the carry bag

WARNING! Check that the legs are properly locked into place. Push each leg to ensure that it does not fold back.

2. Unfold the travel cot frame so it opens

falt.It will click into locked posion. Carefully swing out each leg (x4) unl they click into posion.

maress in place at the boom of the cot.

4. Slide the Velcro straps through the

openings D on the boom of the cot and aach them rmly to the Velcro patches E under the boom of the cot. WARNING! Always ensure the locking mechanisms are fully engaged before using this cot.

5. Zipper entrance for playing.

Make sure to unzip or zip the entrance completely with the child inside. zipper entrance

1. Inser the tubes into casing cloth.

Fit the tubes together

2. The inner side of the boom of the

top rail and the top of the bassinet are provided with zip. Fasten the bassinet to the cot with zips.

3. Insert the maress pad.

Place hands inside and push down on maress to ensure it is rm.

1. To take the maress out of the cot,

detach the Velcro tabs at the boom of the cot and remove the maress.

2. Turn the cot over and fold the four feet

one aer another: pull the closing buon on the upper part of the foot (near the corner of the cot) and fold the foot towards the inside of the cot.

Maintenance This product requires regular maintenance to keep it in good working order. Regularly check all parts of the product to ensure that they are operang correctly and for signs of wear or damage. Only replacement parts supplied or recommen- ded by the manufacturer should be used. The fabric of cot can be wiped clean with a damp cloth and mild soap or can be removed and washed if necessary. Cleaning Clean metal or plasc components with mild detergent and warm water. Never use abrasive, ammonia based, bleach based or spirit type cleaners. Ensure the product is fully dry before use or storage.

3. Press the side buons located on the

middle of the rail and fold the cot structure in half.

4. Once the travel cot structure is folded,

insert it into the carry bag. Zip the carry bag shut for transportaon and storing.