TA80S - Hi-fi system Fenton - Free user manual and instructions

USER MANUAL TA80S Fenton

Exterior view of a FENTON audio amplifier with two black speakers and a digital display unit (no visible text or symbols on main components)

INSTRUCTION MANUAL GEBRUIKSAANWIJZING BEDIENUNGSANLEITUNG MANUAL DE INSTRUCCIONES MANUEL D'INSTRUCTIONS

V1.1

Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

• Prior to using the unit, please ask advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
• The unit contains voltage carrying parts. Therefore do NOT open the housing.
• Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
• Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
• The unit is not suitable for continuous use.
• Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
• When unplugging the unit from a mains outlet, always pull the plug, never the lead.
• Do not plug or unplug the unit with wet hands.
• If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
• If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT switch the unit on. Contact your dealer.
• To avoid fire and shock hazard, do not expose the unit to rain and moisture.
• All repairs should be carried out by a qualified technician only.
• Connect the unit to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
• During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
• If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on.
• Never use the unit in humid rooms or outdoors.

• To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.

• Do not repeatedly switch the fixture on and off. This shortens the life time.

• Keep the unit out of the reach of children. Do not leave the unit unattended.
• Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
• Do not force the controls.
• This unit is with speaker inside which can cause magnetic field. Keep this unit at least 60cm away from computer or TV.
• If this product have a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the product for a long period of time. Otherwise the battery may be permanently damaged.
• If the battery is damaged please replace with same specifications battery. And dispose the damaged battery environment friendly.
• If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.
• Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
• Keep away from electronic equipment that may cause interference.
• Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
• Switch the unit off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the unit.
• Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
• The mains voltage is 220-240Vac/50Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this unit.
• Keep the original packing material so that you can transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.

The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5^ C/41°F and 35^ C/95°F.

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original factory box and packing.

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

POWERSUPPLY

On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product must also be directly connected to the mains and may be used. No dimmer or adjustable power supply.

Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate electrical ground to avoid the risk of electrocution or fire.

REPLACING THE FUSE

If the fuse is defective, replace the fuse with a fuse of the same type and value. Before replacing the fuse, unplug mains lead.

Procedure:

Hand holding a pen with a circular icon containing an 'FUSER' symbol and an arrow indicating rotation (no text or symbols on the pen itself)

Step 1: Open the fuse holder on the rear panel with a fitting screwdriver.

Step 2: Remove the old fuse from the fuse holder.

Step 3: Install the new fuse in the fuse holder.

Step 4: Replace the fuse holder in the housing.

CONTROL PANEL

① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ REPEAT BALANCE BASS TREELE INPUT MIN VOLUME MAX

1. PLAY/PAUSE: Press to start/resume or pause play.
2. PREVIOUS: Press to go to previous track.
3. NEXT: Press to go to next track.
4. REPEAT: Press the repeat button once to continually repeat ALL tracks, press repeat once more to repeat just the current track.
5. VOLUME: Adjust the master volume, bass or treble.
6. BALANCE: Press this button and turn the volume knob to adjust the output balance.
7. BASS: Press this button and turn the volume knob to adjust the bass output.
8. TREBLE: Press this button and turn the volume knob to adjust the treble output.
9. INPUT: Press to switch input modes.

FRONT PANEL

① FENTON POWER USB ② ③ AUX IN TABOS

1. POWER SWITCH: Turn the device ON or OFF.

2. USB PORT: You can play media files from a USB stick by inserting the USB stick in this slot.

3. HEADPHONES JACK: 3.5mm input jack for connecting headphones.

4. AUX INPUT: Auxiliary input jack.

REAR PANEL

①② FENTON TABOS FENTONAUDIO.COM L R CD DVD INPUTS ③ MINIMUM LOAD 4Ω + - R L SPEAKER OUTPUTS Alum. 20W19P1A Volkswagen DN-440Min. 5000mA, 0.3.A CE ↓ ← → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → →

1. RCA INPUTS CD: RCA jack inputs for CD input channel.

2. RCA INPUTS DVD: RCA jack inputs for DVD input channel.

3. SPEAKER OUTPUT RIGHT: These terminals allow for connecting right speakers.

4. SPEAKER OUTPUT LEFT: These terminals allow for connecting left speakers.

5. FUSE: For instructions on how to change the fuse, see "REPLACING THE FUSE".

CONNECTING WITH BT

1. Activate the BT-function on your device (Mobile phone, tablet etc.) from which you want to play the music. See the operating instructions for that device.

2. Enter "BT/USB" mode to activate BT-function. Make sure that no USB stick is inserted.

3. Select "FENTON" on your BT-device and make the BT-connection

If password is required, you can enter "0000".

Attention: The BT distance is approx. 10 meter without any barrier.

Hand holding a screwdriver with an arrow indicating rotation, next to a circular icon with a cross (no text or symbols)

① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ REPEAT BALANCE BASS TREELE INPUT MIN VOLUME MAX

① FENTON POWER USB ② ③ AUX IN TABOS

Hand holding a screwdriver with a circular icon containing a cross symbol (no text or labels)

1 2 3 4 5 6 7 8 9 REPEAT BALANCE BASS TRESILE INPUT MIN VOLUME MAX

① FENTON POWER USB ② ③ AUX IN TABOS

①② FENTON TABOS FENTONAUDIO.COM L R CD DVD INPUTS ③ MINIMUM LOAD 4Ω + - R L SPEAKER OUTPUTS Alum. 20W19P1A Volkswagen DN-440Min. 5000mA, 0.3.A CE ↓ ← → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → → →

Hand holding a pen with a circular icon containing a cross and 'FATE' symbol (no text or labels)

① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ REPEAT BALANCE BASS TREELE INPUT MIN VOLUME MAX

① FENTON POWER USB ② ③ AUX IN TABOS

①② FENTON TABOS FENTONAUDIO.COM L R CD DVD INPUTS ③ 4 5 MINIMUM LOAD 4Ω CAUTION: Black of electric plate. Do not open ATTENTION: Voltage in-electron tube. The pulse switch ACHTUAG: Streamwater graphene. Static Dihens PRECUCUCION: Ramps in electric motor. If an LET ON: Signal aperture. Drain your electrical Speaker Outputs Name: 200101A Volkener: ON-427Mn. NABINA, G.I.A

REMLACEMENT DU FUSIBLE

Hand holding a screwdriver with a circular icon containing a cross symbol (no text or labels)

① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ REPEAT BALANCE BASS TRESLE INPUT MIN MAX VOLUME

① FENTON POWER USB ② ③ AUX IN TABOS

Input connections : RCA, USB

Output connections : 3.5 mm jack

Speaker connections : Speaker screw terminal

Output power : 80W

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

The products referred to in this manual conform to the European Community Directives to which they are subject:

• Low Voltage (LVD) 2014/35/EU
  • Electromagnetic Compatibility (EMC) 2014/30/EU
  • Radio Equipment Directive (RED) 2014/53/EU
  • Restriction of Hazardous Substances (RoHS) 2011/65/EU

Specifications and design are subject to change without prior notice.

www.tronios.com

Copyright © 2021 by Tronios The Netherlands