HQLE10017 - Effect machine HQ Power - Free user manual and instructions

USER MANUAL HQLE10017 HQ Power

To all residents of the European Union Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules. If in doubt, contact your local waste disposal authorities. Thank you for choosing HQPower™! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.

Be very careful during the installation: touching live wires can cause life-threatening electroshocks.

Always disconnect mains power when device not in use or when servicing or maintenance activities are performed. Handle the power cord by the plug only.

Indoor use only. Keep this device away from rain, moisture, splashing and dripping liquids. Never put objects filled with liquids on top of or close to the device.

Keep this device away from children and unauthorized users.

Caution: device heats up during use.

Do not stare directly at the light source, as this may cause epileptic seizure in sensitive people temporarily loss of sight (flash blindness) permanent (irreversible) eye damage.

There are no user-serviceable parts inside the device. Refer to an authorized dealer for service and/or spare parts. The light source is not replaceable.

Respect a minimum distance of 0.5 m between the device’s light output and any illuminated surface. Install the device at a minimal distance of 0.5 m from flammable and explosive objects or substances.

This is a Safety Class 1 device. It is therefore essential that the device be earthed. Have a qualified person carry out the electric connection.

Not suitable for ordinary lighting in household room illumination.

Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual. Protect the power cord against damage. If the external cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord exclusively available from the manufacturer or its service agent. The light source contained in this luminaire shall only be replaced by the manufacturer, its service agent or a similar qualified person. Use an appropriate safety cable to fix the device (e.g. VDLSC7N or VDLSC8N).HQLE10017

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

Keep this device away from dust and extreme temperatures. Make sure the ventilation openings are clear at all times. For sufficient air circulation, leave at least 1" (± 2.5 cm) in front of the openings.

Protect this device from shocks and abuse. Avoid brute force when operating the device.

Familiarise yourself with the functions of the device before actually using it. Do not allow operation by unqualified people. Any damage that may occur will most probably be due to unprofessional use of the device. All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty. Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electro- shocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the warranty. Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems. Mechanical wear and LEDs are not covered by warranty. A qualified technician should install and service this device. Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the device against damage by leaving it switched off until it has reached room temperature. This device is designed for professional use on stage, in discos, theatres, etc. The device should only be used indoors with an alternating current of 100-240 V~, 50/60 Hz. Lighting effects are not designed for permanent operation: regular operation breaks will prolong their lives. Use the original packaging if the device is to be transported. Keep this manual for future reference.

Choose a suitable mounting spot. Mount the device in the desired angle using the included bracket. Connect the power cord to the mains. Disconnect after use.

4.1 Mounting the Device

Have the device installed by a qualified person, respecting EN 60598-2-17 and all other applicable norms. The carrying construction must be able to support 10 times the weight of the device for 1 hour without deforming. Never stand directly below the device when it is being mounted, removed or serviced. Have a qualified technician check the device once a year and once before you bring it into service. Install the device in a location with few passers-by that is inaccessible to unauthorised persons. Overhead mounting requires extensive experience: calculating workload limits, determining the installation material to be used… Have the material and the device itself checked regularly. Do not attempt to install the device yourself if you lack these qualifications as improper installation may result in injuries. For truss mounting, use an appropriate clamp (not incl.) and fit an M10 bolt through the centre of the (folded) bracket. Adjust the desired inclination angle via the mounting bracket and tighten the bracket screws. Make sure there is no flammable material within a 0.5 m radius of the device. Have a qualified electrician carry out the electric connection. Connect the device to the mains with the power plug. All devices must be powered directly off a grounded switched circuit. Do not connect to a dimmer pack. The installation has to be approved by an expert before the device is taken into service.HQLE10017

V. 01 – 20/01/2017 5 ©Velleman nv

4.2 Second Attachment

When hung, the luminaire must always be secured with a secondary attachment e.g. a safety cable.

Refer to the illustrations on page 2 of this manual.

1. Connect the device to the mains using the included power adapter.

2. Adjust the sensitivity level with the sensitivity control. Use the remote control to select the desired

3. Disconnect from the mains after use.HQLE10017

V. 01 – 20/01/2017 6 ©Velleman nv

7. Cleaning and Maintenance

Before starting any cleaning or maintenance activities:

1. Unplug the device's power cord from the outlet.

2. Let the device cool down.

Cleaning Use normal glass cleaner and a soft cloth to wipe off the outside casing. Clean the external optics with glass cleaner and a soft cloth every 20 days. Always be sure to dry all parts completely before plugging the unit back in. Cleaning frequency depends on the environment in which the unit operates (i.e. smoke, fog residue, dust, dew). Do not immerse the device in any liquid. Maintenance All screws should be tightened and free of corrosion. The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension, trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in mounting supports, do not change the location of the connections… Mechanically moving parts must not show any signs of wear and tear. The electric power supply cables must not show any damage. Have a qualified technician maintain the device. There are no user-serviceable parts, apart from the fuse and the lamp. Refer to an authorized dealer for service and/or spare parts.

8. Technical Specifications

• power supply p. 100
• -240 V~, 50/60 Hz power consumption p. 6
• W LED source p. 1
• x 9 W RGB dimensions p. 175
• x 146 x 160 mm weight .7 kg Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.hqpower.eu. The information in this manual is subject to change without prior notice. © COPYRIGHT NOTICE The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.HQLE10017 p. 0

• All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.

• Velleman® can decide to replace an article with an equivalent article, or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion. You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.

• Not covered by warranty: - all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity...), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits; - consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, non- rechargeable, built-in or replaceable), lamps, rubber parts, drive belts... (unlimited list); - flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.…; - flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer’s instructions; - damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally); - damage resulting from an inappropriate packing and shipping of the article; - all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®.

• Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.

• Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.

• Repairs occurring after warranty expiration are subject to shipping costs.

• The above conditions are without prejudice to all commercial warranties. The above enumeration is subject to modification according to the article (see article’s manual).