SaluSpa 60056 - Pool BESTWAY - Free user manual and instructions
Find the device manual for free SaluSpa 60056 BESTWAY in PDF.
📄
Document temporarily unavailable
The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Inflatable spa (relaxation pool) |
| Model | SaluSpa 60056 |
| Brand | Bestway |
| Power supply | 110-120 V, 60 Hz, single phase, 12 A |
| Heating power | 11.3 A (at 20°C) |
| Massage power | 6.5 A (blower) |
| Temperature range | 20°C to 40°C (68°F to 104°F) |
| Default temperature | 35°C (95°F) |
| Massage system | 2 power levels, automatic shut-off after 30 minutes |
| Filtration | Filtration pump with replaceable cartridge |
| Special functions | Energy-saving timer, Freeze Shield™ system, integrated Wi-Fi (2.4 GHz) |
| Connectivity | Bestway Smart Hub app (Android 7.0+ / iOS 10.0+) |
| Safety | Integrated GFCI with test before use, child lock (5 min), temperature and flow alarms |
| Anti-freeze protection | Freeze Shield™ keeps water between 6°C and 10°C |
| Cover | Protective cover provided, mandatory during heating |
| Maintenance | Clean walls with mild soap, replace filter cartridge weekly, regular chemical treatment (chlorine/bromine) |
| Spare parts | Filter cartridge, sealing plugs, gaskets, repair patches (PVC and adhesive) |
| Repairability | Patches provided to repair tears; support via bestwaycorp.com/support |
Frequently Asked Questions - SaluSpa 60056 BESTWAY
How to properly install my SaluSpa 60056?
Choose a smooth, flat, and solid surface. Place the spa, inflate it with the integrated pump (use the pressure gauge, the pressure must be above 5 psi). Fill with water up to the indicated line. Plug in the pump, test the GFCI before each use, and follow the Smart Hub app steps for Wi-Fi connection.
How to test the ground fault circuit interrupter (GFCI)?
Before each use, plug in the pump and press the GFCI test button. The spa should stop. Then press the reset button; the spa should restart. If not, unplug and contact support.
What is the maximum water temperature?
The maximum adjustable temperature is 40°C (104°F). For young children and pregnant women, it is recommended not to exceed 38°C (100°F). A higher temperature may be hazardous to health.
How to clean the filter cartridges?
Unplug the pump. Remove the filter kit, take out the cartridge and rinse it with clean water. If it is very dirty or discolored, replace it. We recommend changing it weekly. For deep cleaning, use a filter cleaner.
How to use the energy-saving timer?
Press the timer button. The LED flashes. Use the + and - buttons to set the heating duration (1 to 999 hours) and the delay before activation (0 to 999 hours). Press again to confirm. To cancel, hold the button for 2 seconds.
What to do if error code E03 is displayed?
Error E03 indicates that the water temperature is below 4°C. The spa is not designed to operate at this temperature. Unplug the pump and wait until the water reaches at least 6°C before restarting. If the error persists when the water is warmer, contact support.
Can I use an extension cord?
No, using an extension cord or multi-socket adapter is prohibited as it may cause the plug to overheat and damage the equipment. Always plug the spa directly into a grounded outlet capable of handling the current (min 12 A).
How to connect my spa to the Wi-Fi app?
Download the Bestway Smart Hub app. Plug in the spa, press and hold the Wi-Fi button for 3 seconds until the indicator flashes slowly. Follow the instructions in the app to connect to your 2.4 GHz network (5 GHz is not supported). Only one phone can be connected at a time.
How to store the spa for winter?
If the temperature frequently drops below 6°C, it is advisable to disassemble the spa. Drain the water, thoroughly dry the liner, pump, and hoses. Replace the sealing plugs on the valves. Store it in a dry, temperate place (>15°C), preferably in its original packaging.
What to do in case of water leakage from the spa?
Identify the source. If the leak is from a tear, use the provided adhesive patch (for standard PVC) or the PVC patch with glue (for TriTech). Clean and dry the area, apply the patch, and wait 30 seconds or 30 minutes depending on the type. If the leak is from the fittings, check the gaskets and tighten manually.
User questions about SaluSpa 60056 BESTWAY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pool in PDF format for free! Find your manual SaluSpa 60056 - BESTWAY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SaluSpa 60056 by BESTWAY.
