AD 1045 - Safe ADLER - Free user manual and instructions

USER MANUAL AD 1045 ADLER

GENERAL SAFETY CONDITIONS

IMPORTANT SAFETY INSTRUCTIONS FOR USE

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE 1.Before using the device, read the instruction manual and follow the instructions contained therein. The manufacturer is not responsible for damage caused by using the device contrary to its intended use or improper operation. 2.Take special care when using the device when children are around. Do not allow children to play with the device do not allow children or persons not familiar with the device to use it. 3.Before using it for the first time, mount the safe in a fixed location (e.g. to the wall or floor). 4.Safes must be installed on a stable surface to avoid tipping and damage. 5.Do not install the safe in areas exposed to direct sunlight or near heat sources. 6.Safes should be installed in dry areas. 7.Do not store flammable or explosive materials or heat-generating items in the safe. 8.Change the emergency code immediately after installation. 9.Do not store the emergency key inside the safe. 10.Do not use the key regularly - it is only for emergency opening. 11.Regularly check the condition of the locking mechanism and keys. 12.Make sure the safe is locked properly after each use to avoid unauthorized access. 13.Keep the keys and access codes to the safe in a place that is safe and out of reach of unauthorized persons. 14.Avoid storing keys near the safe. 15.Do not make modifications to the safe's construction, as this may affect its strength and functionality. 16.In case of damage, use the manufacturer's authorized service. PRODUCT DESCRIPTION AD 1045 Electronic hotel safe 1.safe body

3.digital keypad 4.display 5.battery compartment 6.emergency key lock cover 7.emergency key lock

9. 6 x mounting screw

INITIAL START-UP4 (a) The safe's door is open by default. b) Remove the battery compartment cover located on the back of the door. c) Insert 4 x 1.5V AA type batteries (not included) into the battery compartment. (See "Replacing the batteries"). d) The keypad will illuminate blue. e) The display will show "SECURE GOOD" followed by the message "OPENED" f) The safe is ready for operation.

(a) Personal code 1.Enter a code of 3-6 digits. 2.After the message "OPENED", the safe will open. (b) Emergency code 1.Press LOCK (#) twice - the message "SUPER" will appear. 2.Enter the master code (default 000000), then press LOCK (#). 3.The message "OPENED" will appear - the safe will open. (c) Emergency key (for emergency situations) 1.Insert the key and turn it clockwise. 2.The door will open (the message "OPENED" will appear on the screen). 3.Enter a new code of 3-6 digits, press the LOCK (#) button, the door will close. 4.Remove the key.

Recommended to perform with the door open! 1.Open the safe. 2.Press CLEAR (*) twice, the screen will show "PROG". 3.When "PROG" message disappears, enter the current emergency code and press LOCK (#) button (if wrong code - "E-CODE" message will appear). 4.The message "NEU" will appear on the screen - enter the new 6-digit emergency code and press LOCK (#). 5.The message "DONE" will appear - change completed.

-Always change the default emergency code immediately after installation. -Do not store the key inside the safe. -Press the CLEAR (*) button to erase the incorrect code entered. -After 4 incorrect code attempts - the safe locks for 5 minutes. A message ("HOLD-5") will appear. How to remove, replace batteries: Open the container, take out the used batteries. To properly insert new batteries, pay special attention to the polarity (+) plus and (-

There is a graphic symbol inside or around the battery box, which illustrates how to correctly place the batteries in the box, then close the battery box. Important safety information Improper use of batteries can cause electrolyte leakage, overheating or explosion. Released electrolyte is a source of corrosion and can be toxic. It can cause skin and eye burns; it is also harmful if swallowed. To reduce the risk of injury: -Keep batteries out of reach of children. -Batteries should not be heated, opened, punctured, destroyed, or thrown into a fire, and should not be inserted in reverse into the device. Pay special attention to the [+] and [-] markings. -Do not use old and new batteries at the same time, or batteries of different types ( for example, carbon-zinc and alkaline).5 -Do not touch the battery terminals in the device with metal objects. These components can get hot and cause burns. -Remove the batteries from the device if the batteries are worn out or if the device is to be stored for a long time. -Old depleted or used batteries should be removed from the device and sent for disposal or recycling in accordance with national waste disposal regulations. -In case of battery leakage, remove all batteries, avoiding contact of the leaking electrolyte with skin or clothing. If battery electrolyte comes into contact with skin or clothing, immediately flush the area with water. Before inserting new batteries, clean the battery compartment thoroughly with a damp paper towel. NOTE -Replacing the battery with the wrong type may cause an explosion. Use only batteries of the same size and type. -Do not recharge ordinary batteries ! TECHNICAL SPECIFICATIONS:

EXTERNAL DIMENSIONS: 200 x 420 x 370mm INTERNAL DIMENSIONS: 180 x 405 x 320mm POWER: 4 x AA 1.5V batteries (not included)

For the sake of the environment. Information about waste electrical and electronic equipment In accordance with Article 13(1) and (2) of the Law of September 11, 2015 on Waste Electrical and Electronic Equipment, we inform you about the proper handling of waste electrical and electronic equipment: 1. It is forbidden to place waste electrical and electronic equipment together with other waste - this is confirmed by marking in the form of a "crossed out basket", ordering selective collection of this type of waste. 2. Electrical and electronic equipment may contain hazardous substances, mixtures and components that, when released into the environment, can cause serious danger to the health and life of humans and living organisms. They can lead to numerous health ailments, such as vision, hearing and speech disorders, and can also damage the kidneys, liver and heart, and cause skin diseases. Harmful substances, can also have adverse effects on the respiratory and reproductive systems and lead to cancerous changes. Consumption of plants growing on contaminated soils, and products made from them, can risk the aforementioned health effects. 3. Waste electrical and electronic equipment should be handed over only to authorized collection points, a list of which should be included on each Municipality's website. 4. The household plays an important role, in contributing to the reuse and recovery, including recycling, of waste equipment. It also plays a key role in the waste electrical and electronic equipment management system due to the possibility of direct delivery to authorized collection points and the elimination of undesirable social habits resulting in leaving waste equipment in places not intended for it. In addition, Donate waste electrical and electronic equipment at the point of delivery. A distributor, when supplying equipment intended for households to a purchaser, is obliged to take back used household equipment free of charge at the place of delivery of such equipment, provided the used equipment is of the same type and performed the same functions as the supplied equipment. Cardboard packaging and polyethylene (PE) bags should be placed in the appropriate containers for separate collection of municipal waste according to their description. If there are batteries in the equipment, remove them and separately dispose of them at a collection and storage facility. Do not dispose of the device in the municipal waste container!!! Service If you wish to purchase spare parts or report any complaints, please contact directly with the seller who issued the receipt. Bedienungsanleitung (DE) ALLGEMEINE SICHERHEITSBEDINGUNGEN

VAŽNE SIGURNOSNE UPUTE ZA UPORABU