Connect 310 UHD - Switch MARMITEK - Free user manual and instructions

Product type	HDMI switch
Brand	Marmitek
Model	Connect 310 UHD
Number of HDMI inputs	3
Number of HDMI outputs	1
Supported resolutions	480p, 576p, 720p, 1080i, 1080p, 4K2K @ 24/30 Hz
Video bandwidth	10.2 Gbps
Clock frequency	300 MHz
HDMI standards	HDCP 2.2, CEC, EDID, DVI, all 3D formats, Deep Color (36 bit), x.v.Color
Supported audio	DTS-HD Master Audio, Dolby TrueHD, LPCM 7.1, DTS, Dolby-AC3, 2.0 CH
Power supply	Via USB cable (5 V); no power adapter required
Remote control	Yes, with CR2025 battery included
Separate IR receiver	Yes, for concealed installation
Automatic switching	Yes, according to the last active source
Dimensions (W × D × H)	87 × 60 × 19 mm
Weight	60 g
Operating temperature	0 °C to +70 °C
Operating humidity	10 % to 85 %
Usage	Indoor only, dry places
Maintenance	Clean with a dry cloth; do not expose to moisture
Safety	Do not open; keep out of reach of children; do not expose to rain
Batteries	Remove if unused for a long time; do not mix types or old/new
Repairability	Not user serviceable; contact a professional
Warranty	Void if opened or modified

Frequently Asked Questions - Connect 310 UHD MARMITEK

What should I do if I have no picture or poor quality picture?

First check that all cables are properly connected and use certified HDMI High Speed cables. If the problem persists, test each source directly on the screen to isolate the source of the problem. Make sure the screen and sources support the same format and HDCP protection.

How do I power the switch if no source provides 5V?

Use the supplied USB cable to connect the switch to a USB port on a device or to a standard USB power adapter (not supplied).

Automatic switching does not work properly.

Automatic switching depends on the HDMI source. Some sources do not support this function and you must then manually select the input via the remote control or the 'Select' button. Also make sure that CEC is enabled on your devices if supported.

How do I manually switch between HDMI sources?

You can use the supplied remote control or press the 'Select' button on the front of the device to cycle through inputs.

Sound is not transmitted correctly, what should I do?

Check that your HDMI cables are High Speed and that your screen or amplifier supports the audio formats used (Dolby TrueHD, DTS-HD Master Audio, etc.). The switch transmits all HDMI audio formats up to LPCM 7.1.

3D display does not work correctly.

Make sure the HDMI source is configured to output 3D and that your screen supports the same 3D format. Test the source directly on the screen with an HDMI cable to check proper operation.

The remote control no longer works, what should I do?

Remove the plastic tab from the battery compartment if not already done. Check that the battery (CR2025) is correctly inserted and not discharged. Replace if necessary. Make sure the IR receiver is clearly visible.

Can I use very long HDMI cables?

The maximum recommended length for HDMI cables is 15 meters. Beyond that, signal quality may degrade. Use certified High Speed cables with good shielding.

Does the switch heat up or is it suitable for installation in a closed cabinet?

The device is designed to operate between 0°C and +70°C. It produces little heat. You can install it in a closed cabinet ensuring that the IR receiver is placed outside or visible for the remote control.

What should I do if the picture flickers or disappears intermittently?

This may be due to a defective or poor quality HDMI cable. Try changing the cable. Make sure connections are firmly plugged in. Check that power via USB is sufficient, especially if multiple sources are turned on.

USER MANUAL Connect 310 UHD MARMITEK

• To prevent short circuits, this product should only be used inside and only in dry spaces. Do not expose the components to rain or moisture. Do not use the product close to a bath, swimming pool etc.
• Do not expose the components of your systems to extremely high temperatures or bright light sources.
• In case of improper usage or if you have altered and repaired the product yourself, all guarantees expire. Marmitek does not accept responsibility in the case of improper usage of the product or when the product is used for purposes other than specified. Marmitek does not accept responsibility for additional damage other than covered by the legal product responsibility.
• This product is not a toy. Keep out of reach of children.
• Do not open the product: the device may contain live parts. The product should only be repaired or serviced by a qualified expert.
• Keep batteries out of the reach of children. Dispose of batteries as chemical waste. Never use old and new batteries or different types of batteries together. Remove the batteries when you are not using the system for a longer period of time. Check the polarity (+/-) of the batteries when inserting them in the product. Wrong positioning can cause an explosion.

1. INTRODUCTION

Congratulations on your purchase of the Marmitek Connect 310 UHD™! It allows you to use 1 cable to connect 3 HDMI sources to your TV, without any loss of signal or encryption. It's ideal when your TV doesn't have enough HDMI inputs, or if you want to connect the devices to your TV using just one cable. Examples of HDMI sources are game consoles such as a PlayStation or Xbox, Blu-ray players, digital TV decoders and all other HDMI devices. The Connect 310 UHD™ supports Ultra HD (4k), Full HD (1080p), HDCP 2.2 and all 3D formats, making it suitable for all your existing and future equipment.

Marmitek products are manufactured with the utmost care and are exceptionally high quality. Please read this manual carefully and follow the instructions in order to get the best from this product.

2. SET CONTENT

1 x HDMI Switcher
1 x Remote Control (battery included)
1 x IR Receiver
1 x USB Power Cable
1 x User Manual

3. BENEFITS

• Suitable for simultaneously connecting 3 HDMI devices to your TV
• Energy efficient and requires no external power adapter
• Switches automatically and/or with remote control
• Includes separate IR receiver for operating the switcher when it is positioned out of sight

HDMI PROPERTIES

Video bandwidth 300MHz (enables display of Ultra HD 4k and Full HD 1080p)
Supports HDCP 2.2 for playing protected 4K Ultra HD content
- Supports all 3D formats (suitable for use with your own 3D equipment)
- Deep Color 36-bit (billions instead of millions of colours, better reproduction of subtle differences in gradation and a higher contrast ratio)
- Dolby TrueHD and DTS HD Master Audio (high quality audio support)

4. INSTALLATION

Before installation:

• Turn off all devices (TV and HDMI sources) before connecting them to the Connect 310 UHD™. If a device cannot be turned off, please remove the plug from the socket.
• Only use High Speed HDMI® certified cables for the best picture and sound quality. Using too much force to connect or disconnect the HDMI cables may damage them.

1. Use an HDMI cable to connect the HDMI sources (such as game consoles, Blu-ray players and Digital TV Decoders) to the HDMI ports marked "HDMI input".

2. Use an HDMI cable to connect the TV to the HDMI port marked "HDMI output".

3. If required, connect the IR receiver to the "IR" input in order to continue to operate it when it is positioned out of sight, for example, in a closed cabinet. Remember to position the IR receiver itself within the remote control's line of sight.

4. The Connect 310 UHD™ is energy efficient and is powered by the connected HDMI devices, thus requiring no power adapter.

5. Pull the plastic strip from the remote control's battery compartment to activate the battery and remove the protective film from the top.

5. Use

Switching between connected HDMI devices

The Connect 310 UHD™ allows you to choose which HDMI source is displayed on the TV. If you turn on one of the HDMI sources, it will automatically switch to the correct input. If multiple HDMI sources are turned on, the Connect 310 UHD™ will automatically switch to the HDMI source that was activated last. If you want to select another HDMI source, please use the remote control or the "Select" button on the front.

Note: Automatic switching must be supported by the HDMI source. If it is not supported, you should manually select the appropriate HDMI source.

6. FREQUENTLY ASKED QUESTIONS

No (or poor) image and sound

If you experience poor or no picture after connecting the HDMI switcher, please try to identify the problem by connecting the devices to your screen (TV, monitor or projector) one by one. This allows you to determine whether the problem is with the HDMI sources, the HDMI cables, the HDMI switcher or the screen.

• If none of your connected HDMI devices provides a 5V power supply via the HDMI cable, you need to power the HDMI switcher via the USB cable. Use the supplied USB power cable and plug it into any available USB port on your other devices, or use a standard USB power adapter.
• For the best picture and sound quality, only use High Speed HDMI® certified cables.
• Do not use HDMI cables longer than those specified in the technical data.
• Check the HDMI cables and/or connectors for damage.
• Both the HDMI source and your screen should fully support HDMI.
• Check that your HDMI sources and screen support HDCP (High Bandwidth Digital Content Protection) copy protection.

Incorrect 3D display

• Please check whether the HDMI source is set to display 3D and/or it is set to automatic.
• Both the HDMI source and your HD screen should support the same 3D formats.
• Please check that 3D is displayed correctly by connecting the HDMI source directly to the HD display with an HDMI cable.

Do you have other questions that have not been resolved by the above information? Please go to www.marmitek.com

7. TECHNICAL DATA

Connections

HDMI input 3x HDMI (19-pin female)

HDMI output 1x HDMI (19-pin female)

HDMI cable length max. 15 metres

Video

Supported resolutions 480p, 576p, 720p, 1080i, 1080p and

4k2k@24/30

HDMI standards HDCP 2.2, CEC, EDID, DVI, all 3D

forms, Deep Colour (36-bit), x.v.Color

Video Bandwidth 10.2Gbps

Clock frequency 300MHz

Audio

HDMI audio DTS-HD Master Audio, Dolby TrueHD,

LPCM 7.1, DTS, Dolby-AC3 and 2.0CH

Housing

Dimensions (D x W x H) 87 x 60 x 19mm

Weight 60g

Environment

Ambient temperature +0 to +70° C

Ambient humidity 10% to 85%

Specifications may change without prior notice.

Environmental Information for Customers in the European Union

European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from

regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product.

DECLARATION OF CONFORMITY

Hereby, Marmitek BV, declares that this Connect 310 UHD™ is in compliance with the essential requirements and other relevant provisions of the following Directives:

Directive 2004/108/ec of the european parliament and of the council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility

Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits

Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

Commission Regulation (EC) No 278/2009 of 6 April 2009 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for no-load condition electric power consumption and average active efficiency of external power supplies

MARMITEK BV - P.O. BOX 4257 - 5604 EG EINDHOVEN - THE NETHERLANDS

COPYRIGHTS

Marmitek is a trademark of Pattitude B.V.

Connect 310 UHD™ is a trademark of Marmitek B.V. All rights reserved. Every effort has been made to ensure that the information in this manual is accurate. Marmitek is not responsible for printing or clerical errors. Copyright and all other proprietary rights in the content (including but not limited to model numbers, software, audio, video, text and photographs) rests with Marmitek B.V. Any use of the Content, but without limitation, distribution, reproduction, modification, display or transmission without the prior written consent of Marmitek is strictly prohibited. All copyright and other proprietary notices shall be retained on all reproductions. Other company and product names mentioned herein may be trademarks of their respective companies. Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Marmitek assumes no responsibility with regard to the performance or use of these products.

SICHERHEITSHINWEISE

DECLARATION OF CONFORMITY

DECLARATION OF CONFORMITY

DECLARATION OF CONFORMITY

Dimensioni (A x L x P) 87 x 60 x 19mm

Peso 60g

Ambiente

Temperature ambiente +0 fino ai +70° C

VEILIGHEIDSWAARSCHUWINGEN

LPCM 7.1, DTS, Dolby-AC3 and 2.0CH

Behuizing Splitter

DECLARATION OF CONFORMITY

Marmitek is a trademark of Pattitude B.V. Connect 310^TM is a trademark of Marmitek B.V. All rights reserved.

Copyright and all other proprietary rights in the content (including but not limited to model numbers, software, audio, video, text and photographs) rests with Marmitek B.V. Any use of the Content, but without limitation, distribution, reproduction, modification, display or transmission without the prior written consent of Marmitek is strictly prohibited. All copyright and other proprietary notices shall be retained on all reproductions.