Güde Big Wheeler 464.3 R - Lawn mower

Big Wheeler 464.3 R - Lawn mower Güde - Free user manual and instructions

Find the device manual for free Big Wheeler 464.3 R Güde in PDF.

📄 95 pages English EN 💬 AI Question
Notice Güde Big Wheeler 464.3 R - page 37
Manual assistant
Powered by ChatGPT
Waiting for your message
Product information

Brand : Güde

Model : Big Wheeler 464.3 R

Category : Lawn mower

Download the instructions for your Lawn mower in PDF format for free! Find your manual Big Wheeler 464.3 R - Güde and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Big Wheeler 464.3 R by Güde.

USER MANUAL Big Wheeler 464.3 R Güde

WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and may

increase above the level given in this information sheet. The vibration emission level may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is running but not actually doing the job. This may signicantly reduce the exposure level over the total working period. Identify additional safety measures to protect theoperator from the eects of vibration such as:maintain the tool and the accessories, keep thehands warm, organisation of work patterns. ENGLISH Noise details Sound pressure level L

82,4 dB (A) Measured sound power level L

96 dB (A) Measured according to

Uncertainty K = 3,0 dB (A);

Read and understand the operating instructions before using the appliance. Familiarise with the control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties. The operator is responsible for accidents or risks to third parties. In case of any doubts about connection and operation refer please to our customer center Specied Conditions of Use The mower is intended for the cutting of lawns and grassy areas with a maximum terrain inclination of 20° in private household and hobby gardens. Do not use this product in any other way as stated for normal use.Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages. Use the appliance only outside, never use it in conned and bad ventilated areas. The mower must not be used for cutting bushes, hedges and thickets, for cutting and mulching creepers or lawns on roofs or in balcony boxes. The mower must also not be used as a crusher for mulching tree cuttings and hedges or levelling any terrain roughness. Requirements for operating sta The operating sta must carefully read the Opera- tingInstructions before using the appliance. This appliance is not intended for use by persons (inclu

ding children) with limited physical, sensory or mental capabilities or insucient experience and/or knowledge unless they are supervised by a person who is respon- sible for their safety or have been instructed by them in the safe use of the appliance. Qualication: Apart from the detailed instructions by aprofessional, no special qualication is necessary forappliance using. Minimum age: Persons over 16 years of age can only workon the appliance.An exception includes youngs

ters trained in order to reachknowledge under super- vision of the trainer duringoccupational education. Local regulations may stipulate the minimum age of the user. Training: Using the appliance only requires corre

spondingtraining by a professional or the Operating Instructions. Nospecial training is necessary. Emergency procedure Risk of injury Never put your hands and feet near the rotating parts. Keep a distance from the ejection opening at all times. Danger of burns! Some parts of the appliance get too hot when the appliance is operated.Do not touch any hot parts, e.g. engine and muer. Conduct a rst-aid procedure adequate to the injury and summon qualied medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. For the sake of eventual accident, inaccordance with DIN13164, a workplace has to be ttedwith a rst-aid kit. It isessential to replace any usedmaterial in the rst-aid kitimmediately after it has been used. If you seek help,state the following pieces ofinformation

3. Number of injured persons

Symbols Caution! To reduce the risk of injury, user must read instruction manual Wear ear protectors. Wear goggles. Wear safety cut through resistant shoes with safety sole and steel toe ! Quickly Slow Switch the engine o and remove the socket plug before any work on the engine. Warning against thrown-o items

Check the oil level, ll it up if required.

Fill up with petrol.

Activate the primer 3x if the motor is warm. Activate the primer 6x if the motor is cold. MULCHEN Mulching SAMMELN Collecting MÄHEN Mowing AUSWERFEN Ejecting Warning against hot surfaces! Warning against dangerous voltage! Warning against sharp knives. Knives keep running for a short time after the applian- ce is switched o. Ensure others are a safe distance away from the machine (min. 5 m). Switch o the engine before any work on it. Prohibited smoking and open re using. Keep the machine out of reach of children. The appliance must be stored in a dry place and protected from frost.

Guaranteed sound power level L

Keep dry at all times. This side up Safety Warnings Warning Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, re and/or serious injury. Save all war- nings and instructions for future reference. Keep children and other persons including animals in a safe distance when using the appliance. Minimum safe distance is 5 m. Wear personal protective equipment. Wear suitable protective clothing such as sturdy shoes with non-slip sole, robust long trousers, gloves, safety glasses and hearing protection! Wear protective gloves if necessary. Use the appliance in broad daylight or in a well-lit en

vironment. The appliance must be carefully inspected before use. Only work with appliances that are in a good condition. If you notice any defects on the appliance that may possibly represent a danger for the operator, then you may only use the appliance after the defect has been rectied. Check carefully the terrain where the appliance is being used and remove any items that could get caught and be thrown away. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the inuence of drugs, alcohol or medication. Never touch under the housing body when the engine is running. Keep a distance from the ejection opening at all times. Avoid any inadvertent starting of the engine. Make sure, that the control lever is always in ‘Start’ position when you pull the starter rope. Fuel is highly ammable. Keep the fuel in suitable containers only. The appliance may only be refuelled outdoors and not near open re or burning cigarettes. Emergency procedure Make sure the fuel does not overow. If the fuel overows, the engine must not be started. Remove any dirt from the appliance and prevent any attempt at ignition until fuel fumes have evaporated. The engine must be lled with engine oil before the initial commissioning. Check the oil level every time before commissioning. Fill with engine oil if required. ENGLISH34

Risk of poisoning! Exhaust fumes, fuel and lubricants are toxic substan

ces. Breathing in exhaust fumes may be fatal! Use the appliance only outside, never use it in con

ned and bad ventilated areas. Do not operate the unit in closed spaces where dan

gerours carbon monoxide gases may accumulate. Always carry out a visual inspection before use, to check whether the appliance is damaged, in particular the cutting tools, the fastening components or the entire cutting unit. The mower must not be operated without either the complete grass capture device or the self-closing removable protection device for the ejection opening being attached. Check all screw and plug-in connections and protective equipment if rm and tightened properly and whether all moving parts are running smooth whenever the appliance is to be put into operation. Check all start locking mechanisms and pushbuttons for their correct functioning every time before starting up. The protective equipment on the appliance is strictly prohibited to be disassembled, changed, used in conict with the designation and it is prohibited to attach any protective equipment of other manufacturers. It is strictly prohibited to alter or manipulate any of the sealed devices for motor speed. The appliance must not be used if damaged or safety equipment is defective. Replace any worn-out and damaged parts. Do not start the engine before your feet are in a safe distance from the cutting tools. Do not incline the appliance when being started. Do not start the appliance when you are standing in front of the ejection opening. Provide a safe posture, especially on slopes. Do not work on too steep slopes. Be particularly careful when changing travelling direction on slopes. It is dangerous to mow on slopes, ditches, dykes or in the vicinity of rubbish dumps or similar places. Do not overreach. Keep proper footing and balance at all times. Be careful when going backwards – risk of tripping! Provide adequate lighting or good lighting conditions when working with the machine. Poor lighting/light conditions represent a high safety risk. Do not use the appliance in bad weather, especially when there is a risk of storm. Avoid operating the equipment in wet grass, where feasible. Walk! Never run! Pay maximum attention when turning around and pulling the appliance to you. Switch the mower o whenever carrying or inclining it or when being outside a grass area. Wait until all rotating parts have stopped. If an undesirable item is encountered or the appliance starts vibrating, the appliance must be switched o and the socket plug removed. Check whether the appliance is not damaged. Repair any damage. Switch the appliance immediately o after nishing your work. Never remove the collection bag when the machine is being operated. Always switch the machine o before attaching or removing the collection bag. Do not store the appliance in enclosed places just after being switched o but let it cool down outdoors instead. Never keep the unit with petrol in the tank inside a building where petrol vapours could get in contact with open re or sparks. When the appliance is not going to be used for a long time, store it with an empty tank. Replace any defective muer. Do not change the controlled engine setting and do not rev the engine up. Maintenance Switch the engine o and remove the socket plug before any work on the engine. Wait until all rotating parts have stopped and the appliance has cooled down. Keep the appliance, especially the tank and engine, clean at all times. Clean the ejection opening and cover at regular intervals. Regularly remove any remainders of grass and weed to avoid an overheating of the shaft tube. Remainders of grass and weeds get caught under the protection cover avoiding a sucient cooling of the shaft tube. Remove the remainders carefully with a screwdriver or a similar tool. To reduce re risks, periodically clean the cylinder aps with compressed air and clear the silencer area to get rid of sawdust, branches, leaves or other debris. To keep the danger of re as low as possible the engine and exhaust pipe must be free from grass, leaves and excess grease. Apply environment-friendly oil to all moving parts. Check the collection bag at regular intervals for any wear and aging. Repairs and works specied in these Instructions may only be performed by qualied authorised sta. Use only original accessories and original spare parts. Com

ponents for which there are no instructions for exchanging should be replaced by the manufacturer only. The use of non-original replacement parts is not permitted. We cannot guarantee correct functioning if non-original replacement parts are used. Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insucient maintenance and care can lead to unforeseen accidents and injuries. ENGLISH35 Guarantee The guarantee solely covers inadequacies caused by ma- terial defect or manufacturing defect. Original payment voucher with the sales date needs to be submitted for any claim in the guarantee period. The guarantee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any unauthorised interference or caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee. Service Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bureaucracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label. To always have these data at hand, please enter them below. Serial No.: Art. No: Year of production: Inspection and maintenance plan Non-compliance with the maintenance plan may result in damage to the motor! Regular servicing period Before any start-

After 1 month After 3 months After 6 months After 12 months After 24 months

Hours of operation Engine oil (10W-40) Inspection

Spark plug Inspection Clean

Carry out the appropriate maintenance in the month specied or after being operated for the number of operating hours specied, depending on which occurs rst.

Defects searching Failures Causes Removal The motor does not start Start-Stop lever has not been pressed Press the Start-Stop lever Primer pump not activated Activate primer pump Lack of fuel Add some fuel Bowden cables are too long Adjust the Bowden cables using the coupling nut. Wrong fuel, storing without petrol tank being drained Drain the fuel tank and carburettor. Add fresh petrol. Sooted spark plug (carbon residues on electrodes), electrodes distance too big Clean the spark plug, check the plug thermal value, possibly change the plug, set the electrodes distance to 0.6-0.7 mm The spark plug is wet from petrol (oversa- turated engine). Dry the spark plug out and ret it. Automatic feed does not function Bowden cables are too long Adjust the Bowden cables using the coupling nut. Grass is not collected Blocked channel Full collection bag Too wet grass Clean the ejection channel Empty the collection bag Cut in dry weather ENGLISH37

Incertitude K = 3,0 dB (A);

Kolísavost K = 3,0 dB (A);