Predator Aethon 300 - Keyboard ACER - Free user manual and instructions

USER MANUAL Predator Aethon 300 ACER

• Cable Length: Ø4.5, 1800mm

• Dimensions (L x W x H): 440 x 131 x 40 mm

• Weight: 1115g ± 10g Package Contents

• Warranty booklet x 1 System Compatibility

• Interface: USB Port Getting started

• Plug & Play: Simply connect the keyboard to an available USB port and the keyboard will automatically install all necessary drivers. Keyboard function Hotkey Description Fn + Insert Switch to 6-Key Rollover Fn + Delete Switch to N-Key Rollover Fn + Adjust brightness levels. (100%, 75%, 50%, OFF) Fn + Switch the backlight mode: Lightened / Breathing / Wave / Spin / Trigger Ripple1/ Trigger Single / Trigger Laser Beam / Rain Drop / Trigger Ripple 2 / Rectangle Grid Fn + Home Instant Macro Recording Step 1: Press Fn + F6. Turn on the Windows key lock. Step 2: Press Fn + Home, LED will be flashing. Step 3: Assign a key you want to save macro, LED will flashing faster. Step 4: Type key which in macro list. Step 5: Press Fn + Home, finish instant macro record. Recording process will be terminated if no action within 20sec.2 English Comfort Guideline Some research has suggested long periods of repetitive motion; using an improper operation space, body position, and poor work habits may be associated with physical discomfort and injury to nerves, tendons, and muscles. Below are some guidelines for optimizing comfort of usage and avoiding injury.

1. Put the keyboard and monitor in front of you, and place the mouse

2. Have your elbow next to your side and adjust the height of the table

and chair to make the mouse and keyboard placed below your elbow.

3. Have your feet well supported and your shoulders relaxed.

4. Taking frequent short breaks can help ease the tiredness from using

the keyboard for a long time.

5. Do not sit in the same position all day operating the keyboard and

mouse. Leave the seat, do some exercise for arms and shoulders, and relax your wrists, neck and legs.

6. Beware of discomfort; when you experience body conditions like pain,

numbness, or tingling in hands, wrists, arms, shoulders, neck and legs, please consult qualified health professionals. Caution

• Do not disassemble the device or operate the device under abnormal conditions.

• Do not submerge the device in water.

• If the device backlight could not be lightened up, please re-plug in the USB.

• If the device could not be functional, or there was thermal abnormal situation, please re-plug in the connector.

• If you still encounter problems after going through the corrective measures, please contact your dealer or an authorized service center for assistance.

• For more information regarding the PREDATOR accessories, please visit the PREDATOR website at www.acer.com/predator Environment Temperature:

• Operating: 0 °C to 40 °C

• Non-operating: -20 °C to 60 °C Humidity (non-condensing):

• Operating: 10% to 85%

• Non-operating: 10% to 95% Manufacturer address Acer Inc. 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi, New Taipei City 221, Taiwan3 English Europe – EU Declaration of Conformity We declare under our sole responsibility that the product is conformity with all the essential requirements and other provisions of the European Council Directive RoHS Directive (2011/65/EU), EMC Directive (2014/30/EU) and the Low Voltage Directive (2014/35/EU) issued by the Commission of the European Community. This product must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• À l’arrêt : 10% à 95% Adresse du fabricant Acer Inc. 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi, New Taipei City 221, Taiwan This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• No operativa: 10% a 95% Dirección del fabricante Acer Inc. 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi, New Taipei City 221, Taiwan This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

(Restricted substances and its chemical symbols)

Polybrominated biphenyls (PBB)

Polybrominated diphenyl ethers (PBDE)