INVENTUM ST306ZZA - Vacuum Cleaner

ST306ZZA - Vacuum Cleaner INVENTUM - Free user manual and instructions

Find the device manual for free ST306ZZA INVENTUM in PDF.

English EN Download 💬 AI Question 11 questions ⚙️ Specs
📄

Document temporarily unavailable

The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.

View the manual : Français FR Deutsch DE English EN Nederlands NL
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Canister vacuum cleaner with bag
Brand Inventum
Model ST306ZZA
Power supply Mains, 220-240 V ~ 50/60 Hz
Suction power Variable (MIN - MAX) with manual adjustment on the appliance and handle
Bag type Disposable dust bag (recommended: original Inventum bags)
Filtration system Motor filter + Washable HEPA filter
Cord length Approximately 6 meters
Cord rewind Automatic via pedal
Telescopic tube Yes, adjustable in length
Included accessories Round brush nozzle, upholstery nozzle, crevice nozzle, clip-on accessory holder
Bag full indicator Red indicator on the appliance
Usage Household (hard floors, carpet, furniture, etc.)
Maintenance Change the bag when the indicator is red; replace the motor filter every 4 bags; clean the HEPA filter with lukewarm water
Safety Do not vacuum water or flammable materials; do not use without bag/filter; unplug before maintenance
Warranty 2 years, conditions as per manual
Country of origin Not specified (designed in the Netherlands)

Frequently Asked Questions - ST306ZZA INVENTUM

How to replace the dust bag?
Make sure the vacuum cleaner is turned off and unplugged. Open the compartment by pushing the handle upwards, carefully remove the full bag from the holder, discard it, then install a new bag following the direction. Close the cover: the bag opening automatically positions itself.
How often should I replace the motor filter?
The motor filter must be replaced every 4 dust bag changes. Remove the used filter by sliding it upwards, insert a new one by sliding it downwards.
How to clean the HEPA filter?
Unplug the appliance, open the HEPA filter grille by pressing the clip, remove the filter, rinse it under lukewarm running water (without detergent or brush), let it dry completely in the air before reinstalling.
What to do if the vacuum cleaner stops suction or power decreases?
First check that the dust bag is not full (red indicator). Then check the motor filter and HEPA filter: if they are dirty, clean or replace them. Also make sure the hose is not blocked and that the power settings are at maximum.
Can I use the vacuum cleaner without a dust bag or filter?
No, never. Using without a bag or filter can damage the motor and reduce performance. All filters and the bag must be installed before each use.
How to adjust the suction power?
You can adjust the power in two ways: on the appliance, slide the slider between MIN and MAX; on the hose handle, use the additional adjustment. Use low power for curtains, medium for furniture, and maximum for hard floors.
How to automatically rewind the power cord?
Turn off the vacuum cleaner, unplug the plug from the wall outlet, hold the plug in your hand, then press the automatic rewind pedal on the appliance. Guide the cord slightly to prevent kinking.
What does the red indicator on the vacuum cleaner mean?
The red indicator means the dust bag is full or the airflow is reduced (e.g., clogged filter). Replace the bag or clean the filters to restore optimal suction.
Can I vacuum water or liquids with this vacuum cleaner?
No, this vacuum cleaner is designed only for dry cleaning. Vacuuming liquids can damage the appliance and pose a risk of electric shock.
How to assemble the hose and telescopic tube?
Make sure the appliance is unplugged. Insert the hose end into the suction opening and turn it to the right until it clicks. Insert the hose handle into the telescopic tube until it clicks. To adjust the tube length, slide the button upwards, adjust, then release.

User questions about ST306ZZA INVENTUM

1 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

Can the hood of the INVENTUM ST306ZZA vacuum cleaner be completely removed?
Frequently Asked Questions - 20/04/2026
Response Notice-Facile

Yes, the hood of the INVENTUM ST306ZZA vacuum cleaner can be completely removed. This operation is often necessary to empty the dust container or to perform thorough cleaning and maintenance.

How to safely remove the hood:

  • Ensure that the vacuum cleaner is turned off and unplugged.
  • Locate the locking mechanisms of the hood, usually clips or latches located on the sides or at the front.
  • Unlock these mechanisms by gently pressing or pulling depending on the model.
  • Lift or slide the hood to detach it completely.

When reassembling, make sure to properly reposition the hood and lock it securely to ensure a good seal and optimal operation of the vacuum cleaner.

Respond (be the first)

Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual ST306ZZA - INVENTUM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ST306ZZA by INVENTUM.

USER MANUAL ST306ZZA INVENTUM

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : INVENTUM

Model : ST306ZZA

Category : Vacuum Cleaner