Stelolungo KIT G20089 - Hand blender G3 Ferrari - Free user manual and instructions

USER MANUAL Stelolungo KIT G20089 G3 Ferrari

ACCESSORIO FUSTO INOX AD

ENGLISH: SAFETY INSTRUCTIONS

The following are important notes on the installation, use and maintenance; save this instruction manual for future reference; use the equipment only as specified in this guide; any other use is considered improper and dangerous; therefore, the manufacturer cannot be held responsible in the event of damages caused by improper, incorrect or unreasonable use. Before use, ensure the equipment is undamaged; if in doubt, do not attempt to use it and contact the authorized service center; do not leave packing materials (i.e. plastic bags, polystyrene foam, nails, staples, etc.) within the reach of children as they are potential sources of danger; always remember that they must be separately collected. Make sure that the rating information given on the technical label are compatible with those of the electricity grid; the installation must be performed according to the manufacturer's instructions considering the maximum power of the appliance as shown on the label; an incorrect installation may cause damage to people, animals or things, for which the manufacturer cannot be considered responsible thereof. If it is necessary to use adapters, multiple sockets or electrical extensions, use only those that comply with current safety standards; in any case do not exceed the power consumption limits indicated on the electrical adapter and / or extensions, as well as the maximum power shown on multiple adaptor. Do not leave the unit plugged; better to remove the plug from the mains when the device is not in use. Always disconnect from power supply if you leave it unattended. Cleaning operations should be carried out after unplugging the unit. If the unit is out of order and you do not want to fix it, it9 must be made inoperable by cutting power cord. - Do not allow the power cord to get closer to sharp objects or in contact with hot surfaces; do not pull it to disconnect the plug. - Do not use the appliance in the event of damage to the power cord, plug, or in case of short circuits; to repair the product only address an authorized service center. - Do not handle or touch the appliance with wet hands or bare feet. Do not expose the appliance to harmful weather conditions such as rain, moisture, frost, etc.. Always store it in a dry place. - This appliance cannot be used by children, even if they're more than 8 years old. - This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they received supervision or instruction concerning use of appliance in a safe way and understand the hazards involved. - Children must not play with the appliance. - Keep the appliance and its cord out of reach of children less than 8 years. If the power cord is damaged, or in case of failure and / or malfunction do not tamper with the unit. The reparation must be done by manufacturer or by service center authorized by the manufacturer in order to prevent any risk. Failure to comply with the above may compromise the unit safety and invalidate the warranty. - This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; by clients in hotels, motels and other residential type environments; farm houses, bed and breakfast type environments. - The appliance is not intended to be operated by means of an external timer or separate remote-control system.10 - Before every use, unroll the power cord. - Use original spare parts and accessories only. - Do not subject the product to strong impacts, serious damages may result. Do not use near or under flammable materials (like curtains), heat, cold spots and steam. GENERAL INSTRUCTIONS The blades of the hand blender are very sharp to chop: Be careful not to cut yourself during cleaning operations and/or when removing the attachments. To avoid the overheating of the motor, do not use the appliance running continuously for more than 30 seconds, then make at least 5 minutes rest. Do not use the product without food. Do not insert your fingers inside the bowl while the mixer is running. Before using for the first time, carefully wash the parts that will be in touch with food: immersion cone, accessories and blades. Before operating the appliance, check that all the parts are correctly installed. Never leave the appliance unattended while it is running. CAUTION! Unplug the unit from the socket before touching the blades for any reason, such as cleaning or foods removing. CAUTION! Always unplug the unit from the electrical outlet each after use and/or before touching the blades / installing or removing any accessory or attachment. To clean the immersion cone and the accessories, it is recommended using warm tap water and containing the use of detergents. When cleaning with detergents, rinse thoroughly. Do not immerse the top of the mixer in water or other liquids, clean it with a damp cloth.11 PARTS G20089

- Assemble motor housing to the immersion stainless-steel shaft as described in the "Assembling the shaft" section. Plug the unit to the electrical outlet. - Insert mixer in the bowl with the food to blend (ensure to immerse the entire blade to avoid splashing). - Press the button (speed I or II) to start operating. For best results, follow the instructions in "Setting processing speed" section. CAUTION! Do not insert your fingers inside the bowl containing food - Unplug the hand blender from the electrical outlet, once finished working, This appliance is not suitable for chopping hard foods or ice. It is suitable for making baby food, milk shakes, sauces, juices, cocktails, soups, vegetable soup, etc. ... When processing fruits or vegetables, add also a small quantity of water to allow the device to operate in a homogeneous way. Assembling the shaft Insert motor body (4) in the shaft (6). Rotate anticlockwise until it blocks. For unblocking, rotate clockwise.

SETTING THE WORKING SPEED

The unit features two working speeds (2 and 3 button). For best results and to avoid overheating, it is recommended to use the unit for short and regular intervals, then for a long time, always making circular movements inside the container of food. It is also recommended to start processing food from the first speed, ending up using the faster speed. WHISK ATTACHMENT - Assemble chopper set as described in the "Assembling the whisk" section. - Plug the unit to the electrical outlet. - Press the button (speed I or II) to start operating. CAUTION: do not insert your fingers or hair inside the food container. - Unplug the unit from the outlet once the process is finished. The whisk attachment is ideal for creating sauces and cream and for whipping and whisking. Assembling the whisk attachment Insert the pin of the whisk (9) into the attachment (8). Insert body (4) in attachment (8) and Rotate anticlockwise until it blocks. CHOPPER Assemble chopper set as described in the "Assembling the chopper" section. - Plug the unit to the electrical outlet. - Press the button (speed I or II) to start operating. CAUTION: if you lift the lid from the working bowl, the blade will stop automatically, avoiding any risk of injury. - Unplug the unit from the outlet once the process is finished. This appliance is not suitable for chopping hard foods or ice, as they could damage the blades. Otherwise, it is suitable for making baby food, milk shakes, sauces, vegetables, fruits, almonds, meat, etc... When processing fruits or vegetables, remember to chop them into small pieces and remove pits or hard rinds. If you want to prepare baby food, add some water or milk in small quantity. Do not exceed the maximum capacity of the bowl.12 Assembling the chopper set Assemble the set as shown on Figure 3, 4 and 5. Assemble the blades to the bowl as shown in Figure 3 and insert the food. Place the lid by hooking it to the appropriate joints on the container, as shown in Figure 4. Insert motor body (4) in the lid (10) and Rotate anticlockwise until it blocks, as shown in Figure 4. CLEANING - Unplug the unit from the electrical outlet. Do not immerse the motor body in water or other liquids, but wash it with a damp cloth and non-abrasive detergent. Avoid any infiltration of water inside the motor housing. Shaft, blades and accessories can be washed like normal dishes, with a non-abrasive sponge and mild detergent. Dry them thoroughly before assembling them to the main body. For a quick cleaning of the blades of the shaft during different processes, insert the hand blender into a cup filled with water and operate for a few seconds. TECHNICAL FEATURES

• Power supply: AC 220-240V~50/60Hz. 700W

• 2 working speeds, Ergonomic motor housing

• Detachable stainless-steel shaft

• Accessories: chopper, whisk, beaker