LZ791AV2 - Sink SMEG - Free user manual and instructions

Brand	Smeg
Model	LZ791AV2
Product type	Kitchen sink
Material	Stainless steel (estimated)
Dimensions (L x W x H)	Approximately 1000 x 500 x 200 mm (estimated)
Weight	Approximately 12 kg (estimated)
Color	Light or dark depending on version
Number of bowls	1 (estimated)
Mounting type	Under counter
Included accessories	None (silicone not included)
Recommended use	Domestic use
Daily cleaning	Soft sponge and dish detergent, rinse and dry
Stubborn stains (light color)	Bleach/warm water solution (3/4-1/4), let sit 8 hours, rinse
Stubborn stains (dark color)	Circular motions with soft sponge and detergent
Limescale stains	Non-abrasive descaling product, rinse and dry
Usage precautions	Avoid impacts, hot objects, steel wool, boiling liquids without water
Annual maintenance	Descaling recommended at least once a year
Safety	Keep packaging out of reach of children
Warranty	Standard warranty subject to compliance with instructions
Repairability	Call a qualified professional

Frequently Asked Questions - LZ791AV2 SMEG

How to install the Smeg LZ791AV2 sink?

Installation must be carried out by a qualified professional. First clean the sink with a mild detergent. Use silicone (not included) to fix the sink under the countertop. Follow applicable standards.

What product to use for daily cleaning?

Use a soft non-abrasive sponge and ordinary dish detergent. Rinse thoroughly with warm water and dry with a microfiber cloth to avoid stains.

How to remove stubborn stains on a light-colored sink?

Apply a solution of bleach and warm water (3/4 bleach to 1/4 water). Let it sit for about 8 hours (preferably overnight). Rinse thoroughly and dry carefully. Repeat if necessary 1 to 2 times.

How to clean stains on a dark-colored sink?

Use a soft non-abrasive sponge soaked in dish detergent. Make small circular motions on the stain. Rinse with warm water and dry with a microfiber cloth.

How to remove limescale stains?

Use a non-corrosive descaling product diluted in warm water. Apply evenly, let it sit for a few minutes, gently scrub with a sponge, rinse and dry.

What products to avoid to not damage the sink?

Avoid ammonia, caustic soda, drain cleaners, steel wool and abrasive sponges. Do not place hot objects directly on the sink.

What to do if the sink gets scratched?

Scratches may be irreparable. Use a cutting board to avoid cuts. Do not drop heavy or sharp objects.

How to maintain the sink to prevent limescale?

Perform a descaling treatment at least once a year. Fill the bowl with warm water and a descaling product, let it sit for 5 to 6 hours, then rinse and dry.

Is the warranty maintained if I do not properly maintain the sink?

No, failure to follow cleaning and maintenance instructions may void the manufacturer's standard warranty.

Can I pour boiling water directly into the sink?

No, first pour cold water by turning on the tap and ensure there is at least 1 cm of water at the bottom to avoid damaging the product.

USER MANUAL LZ791AV2 SMEG

Before fitting the sink, it is advisable to wash it using standard dish detergent and a soft sponge to remove any manufacturing residues.

Rinse the sink thoroughly and dry it using a microfibre cloth.

STANDARD INSTALLATION

UNDERMOUNT INSTALLATION

The packaging materials (plastic bags, expanded polystyrene, etc.) must not be left within reach of children as they are a potential hazard.

Installation and support should be undertaken by qualified individuals, in accordance with the applicable legal requirements.

The silicone is not included with the product.

The sink shown in this guide is for illustrative purposes only.

1. ROUTINE MAINTENANCE

Cleaning your Smeg product is quick and simple. Even though the non-porous surface prevents liquids penetrating into the material, it is preferable to remove them immediately using a soft, non-abrasive sponge and standard dish detergent. You should then rinse the surface and dry it carefully using a microfibre cloth.

2. NON-ROUTINE MAINTENANCE

Cleaning stubborn stains is not difficult: all you need to do is choose the right product and use it correctly.

For stubborn stains on LIGHT-COLOURED products, you can use a solution of bleach and warm water (3/4 to 1/4), leaving it to act for eight hours (we recommend that this cleaning be performed during the night). Afterwards, rinse thoroughly and dry the entire surface carefully using a microfibre cloth. If the stains remain, the operation can be repeated one or two more times.

For stubborn stains on DARK-COLOURED products, you can remove them directly with a soft, non-abrasive sponge and standard dish detergent, using small circular movements. When finished, rinse using warm water and carefully dry the entire surface using a microfibre cloth. If the stains remain, the operation can be repeated one or two more times.

To remove limescale stains, we recommend the use of a non-corrosive descaling product diluted with warm water. Distribute the solution uniformly over the entire surface of the product. Clean with a soft, non-abrasive sponge using small circular movements and leave the product to act for several minutes (follow the instructions and conditions for use on the product label). When finished, rinse using warm water and dry carefully using a microfibre cloth.

Failure to follow the cleaning and maintenance instructions stated in this manual may invalidate the standard warranty provided by the manufacturer.

To ensure that there is no change to the characteristics of the product, we recommend that users observe the following precautions:

• Dry the surface of the product every day to avoid prolonged exposure to water that could lead to the build-up of limescale or stubborn stains.
• Do not use detergents that contain alkaline substances and aggressive liquids (such as ammonia, caustic soda or drain cleaners).
• Do not remove traces of dirt using steel scourers or abrasive sponges that could damage the surface.
• Do not cut or chop directly on the surface of the product because this could cause irreparable scratches (always use chopping boards).
• Avoid accidental knocks that could cause irreparable micro-damage.
• Do not place hot cookware, pans or coffee makers directly on the sink surface: stains from discolouration and/or damage could form in areas where hot items are placed.
• Avoid pouring boiling liquids directly into the sink without first turning on the cold tap and filling the sink with at least 1 cm of water, as this could damage the product.
• To prevent the build-up of limescale, it is recommended that a descaling treatment be completed at least once a week. This is recommended in particular for dark-coloured sinks. Fill the tub with warm water and add two spoonfuls of liquid or powder dishwasher detergent or a dishwasher tab. Leave the solution for 5/6 hours. Rinse thoroughly and dry carefully.

Do not put pans or coffee makers that have just been taken off the heat (which sometimes reach 500°C) directly into the sink.

Do not place pans, frying pans, or coffee makers that have just been removed from the heat (which in some cases may reach temperatures of 500°C) directly into the sink.

The sink is not affected.

The sink shown in this manual has purely illustrative characteristics.

1. DAILY CLEANING

Smeg products are designed to be durable and simple. Despite the non-porous surface of the sink preventing penetration into the material, it is advisable to clean it immediately, using a soft sponge and a mild detergent for dishes, rinse the surface and dry thoroughly with a microfiber cloth.

2. PERIODIC MAINTENANCE

Cleaning the sink with stains is not difficult: it is enough to choose a reliable product and apply it correctly.

In case of stubborn stains on light-colored surfaces, you can use a diluted bleach and hot water (3/4 and 1/4), leaving it on the surface for about 8 hours (it is advisable to perform this procedure at night), after which the entire surface must be thoroughly rinsed and carefully dried with a microfiber cloth. If stains persist, the procedure can be repeated 1 or 2 times.

In case of stubborn stains on dark-colored surfaces, you can remove them with the help of a soft sponge and a common dishwashing detergent, applying it with small circular movements. After that, rinse well with hot water and dry the entire surface thoroughly with a microfiber cloth. If stains persist, the procedure can be repeated 1 or 2 times.

To remove limescale stains, it is recommended to use an anti-scale product that prevents the formation of limescale and effectively removes it, diluted in hot water. Spread the solution over the entire surface with a soft sponge using small circular movements, and leave it on the surface for a few minutes (follow the instructions and dosage indicated on the product label). Finally, rinse with hot water and dry thoroughly with a microfiber cloth.

Failure to follow the instructions specified in this manual may result in loss of warranty provided by the manufacturer.

PRECAUTIONS AND RECOMMENDATIONS

To preserve the characteristics of the product, we recommend following the following precautions:

• Wipe the product surface daily, avoiding prolonged contact with splashes of sink water, which can lead to the formation of stains or scratches.

Do not use abrasive agents, chemical reagents, or aggressive substances (e.g., ammonia, caustic soda, products for unclogging pipes).

Do not clean the sink with steel or abrasive sponges, which can damage the surface.

Do not place or drop anything directly on the product surface, as this may cause irreparable damage (use a cutting board for cutting products).

• Avoid sharp impacts that can cause irreparable micro-cracks.

Do not place hot pots, kettles, or pans directly on the surface of the sink. This can cause stains and damage the surface.

• Avoid pouring boiling water directly into the sink without first opening the cold water tap and filling it with at least 1 cm of water, as this can damage the product.
• To prevent the formation of limescale, we recommend cleaning the sink at least once a week. This procedure is especially recommended for sinks of dark color. Fill the sink with warm water and add a few tablespoons of mild detergent or powder for dishwashers or a tablet. Leave for 5/6 hours. Rinse thoroughly and dry carefully.

Do not place hot pans, skillets, or kettles directly on the surface of the sink (in some cases they can reach temperatures of 500°C).

a 1

Therefore, 2m - 1 ≥ lg(1/b)

1

yj 1000

o 1000000000000000000000000000000000000000000

5/6 1g20 gllal jgl. ggs glk d k ggl all

aLiuyu Loo g jolll oJy

Smeg S.p.A

Via Leonardo da Vinci, 4

42016 Guastalla (RE), ITALY

[e-mail]

smeg