VZ3434N - Sink SMEG - Free user manual and instructions
Find the device manual for free VZ3434N SMEG in PDF.
| Product type | Kitchen sink |
| Brand | SMEG |
| Model | VZ3434N |
| Material | Resin composite |
| Available colors | Light and dark |
| Number of bowls | 1 bowl (estimation) |
| Installation type | Recessed (overmount or undermount) |
| Power supply | None (non-electric) |
| Main functions | Washing, rinsing, draining |
| Daily maintenance | Drying after use, avoid stagnant water |
| Recommended cleaning products | Mild detergent, non-abrasive sponge |
| Stubborn stain cleaning (light surfaces) | Bleach/warm water solution (3/4-1/4), let sit 8h |
| Stubborn stain cleaning (dark surfaces) | Circular motions with sponge and detergent |
| Descaling | Anti-limescale product diluted in warm water |
| Preventive anti-limescale treatment | Once per period with liquid detergent or tablet |
| Usage precautions | Do not place hot objects, avoid impacts, use cutting board |
| Prohibited materials | Steel wool, abrasive sponges, alkaline detergents |
| Repairability | Not repairable (surface damage irreversible) |
| Warranty | Subject to compliance with care instructions |
| Installation | By qualified personnel, silicone not provided |
Frequently Asked Questions - VZ3434N SMEG
User questions about VZ3434N SMEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Sink in PDF format for free! Find your manual VZ3434N - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VZ3434N by SMEG.
USER MANUAL VZ3434N SMEG
Before fitting the sink, it is advisable to wash it using standard dish detergent and a soft sponge to remove any manufacturing residues.
Rinse the sink thoroughly and dry it using a microfibre cloth.
STANDARD INSTALLATION
UNDERMOUNT INSTALLATION
The packaging materials (plastic bags, expanded polystyrene, etc.) must not be left within reach of children as they are a potential hazard.
Installation and support should be undertaken by qualified individuals, in accordance with the applicable legal requirements.
The silicone is not included with the product.
The sink shown in this guide is for illustrative purposes only.
1. ROUTINE MAINTENANCE
Cleaning your Smeg product is quick and simple. Even though the non-porous surface prevents liquids penetrating into the material, it is preferable to remove them immediately using a soft, non-abrasive sponge and standard dish detergent. You should then rinse the surface and dry it carefully using a microfibre cloth.
2. NON-ROUTINE MAINTENANCE
Cleaning stubborn stains is not difficult: all you need to do is choose the right product and use it correctly.
For stubborn stains on LIGHT-COLOURED products, you can use a solution of bleach and warm water (3/4 to 1/4), leaving it to act for eight hours (we recommend that this cleaning be performed during the night). Afterwards, rinse thoroughly and dry the entire surface carefully using a microfibre cloth. If the stains remain, the operation can be repeated one or two more times.
For stubborn stains on DARK-COLOURED products, you can remove them directly with a soft, non-abrasive sponge and standard dish detergent, using small circular movements. When finished, rinse using warm water and carefully dry the entire surface using a microfibre cloth. If the stains remain, the operation can be repeated one or two more times.
To remove limescale stains, we recommend the use of a non-corrosive descaling product diluted with warm water. Distribute the solution uniformly over the entire surface of the product. Clean with a soft, non-abrasive sponge using small circular movements and leave the product to act for several minutes (follow the instructions and conditions for use on the product label). When finished, rinse using warm water and dry carefully using a microfibre cloth.
Failure to follow the cleaning and maintenance instructions stated in this manual may invalidate the standard warranty provided by the manufacturer.
To ensure that there is no change to the characteristics of the product, we recommend that users observe the following precautions:
- Dry the surface of the product every day to avoid prolonged exposure to water that could lead to the build-up of limescale or stubborn stains.
- Do not use detergents that contain alkaline substances and aggressive liquids (such as ammonia, caustic soda or drain cleaners).
- Do not remove traces of dirt using steel scourers or abrasive sponges that could damage the surface.
- Do not cut or chop directly on the surface of the product because this could cause irreparable scratches (always use chopping boards).
- Avoid accidental knocks that could cause irreparable micro-damage.
- Do not place hot cookware, pans or coffee makers directly on the sink surface: stains from discolouration and/or damage could form in areas where hot items are placed.
- Avoid pouring boiling liquids directly into the sink without first turning on the cold tap and filling the sink with at least 1 cm of water, as this could damage the product.
- To prevent the build-up of limescale, it is recommended that a descaling treatment be completed at least once a week. This is recommended in particular for dark-coloured sinks. Fill the tub with warm water and add two spoonfuls of liquid or powder dishwasher detergent or a dishwasher tab. Leave the solution for 5/6 hours. Rinse thoroughly and dry carefully.
Do not put pans or coffee makers that have just been taken off the heat (which sometimes reach 500°C) directly into the sink.
Do not place pots, pans, or coffee makers that have just been taken off the heat (which in some cases may reach a temperature of 500°C) directly into the sink.
The sink is not affected.
The sink shown in this manual is for illustrative purposes only.
1. DAILY CLEANING
The Smeg product is easy and simple to clean. Despite the fact that the surface is resistant to penetration, it is advisable to clean it immediately after use, using a soft cloth or sponge with a mild detergent, then rinse the surface and dry thoroughly with a microfibre cloth.
2. PERIODIC MAINTENANCE
Cleaning the sink with stains is not difficult: it is enough to choose a reliable product and apply it correctly.
In the case of stubborn stains on light-coloured surfaces, you can use a bleach-based cleaner and hot water (3/4 and 1/4), leaving it on the surface for about 8 hours (it is advisable to perform this procedure at night), after which the entire surface must be thoroughly rinsed and carefully dried with a microfibre cloth. If the stains do not disappear, the procedure can be repeated 1 or 2 times.
In the case of stubborn stains on dark-coloured surfaces, you can remove them with a soft, non-abrasive sponge and a common mild detergent for dishes, applying it with gentle circular movements. After that, rinse well with hot water and carefully dry the entire surface with a microfibre cloth. If the stains do not disappear, the procedure can be repeated 1 or 2 times.
To remove limescale stains, it is recommended to use an anti-limescale product that prevents the formation of limescale and removes existing deposits. Dilute the product in hot water. Apply the solution over the entire surface with a soft, non-abrasive sponge using gentle circular movements, and leave it on the surface for a few minutes (follow the instructions and dosage indicated on the product label). Finally, rinse with hot water and dry thoroughly with a microfibre cloth.
Failure to follow the instructions specified in this manual may result in loss of warranty provided by the manufacturer.
PRECAUTIONS AND RECOMMENDATIONS
To preserve the characteristics of the product, we recommend following the precautions below:
- Daily wipe the surface of the product, avoiding contact with water stains and dirt, which can lead to the formation of limescale or stubborn stains.
Do not use abrasive agents containing aggressive chemicals or sharp objects (e.g., ammonia, caustic soda, pipe cleaners).
Do not wipe off dirt with steel or abrasive sponges, which can scratch the surface.
Do not place or drag anything directly on the surface of the product, as this may irreparably damage it (use a cutting board for cutting products).
- Avoid sharp impacts that can cause irreparable micro-cracks.
Do not place hot pots, kettles, or pans directly on the surface of the kitchen sink. This can cause stubborn stains and damage the surface.
- Avoid pouring boiling water directly into the sink without first opening the cold water tap and filling it with at least 1 cm of water, as this can damage the sink.
- To prevent the formation of limescale, we recommend cleaning the sink at least once a week. This procedure is especially recommended for dark-colored sinks. Fill the sink with warm water and add a dose of liquid detergent or powder for dishwashers or a tablet. Leave the solution for 5/6 hours. Then rinse thoroughly and dry carefully.
Do not place hot pans, skillets, or kettles directly on the surface of the kitchen sink (in some cases they can reach temperatures of 500°C).
Smeg S.p.A
Via Leonardo da Vinci, 4
42016 Guastalla (RE), ITALY
smeg@smeg.it
smeg
Brand : SMEG
Model : VZ3434N
Category : Sink