K5525 - Watch Calypso - Free user manual and instructions

Product type	Digital watch
Brand	Calypso
Model	K5525
Power source	CR2016 battery
Accuracy	±30 seconds per month at 25°C
Operating temperature	10°C to 40°C
Display	Hours, minutes, month, date, day of week, AM/PM
Time format	12/24 hours
Second time zone	Yes
Alarm	Yes, with sound signal
Stopwatch	Yes, with lap measurement function
Timer	Yes
Hour chime	Yes
Electroluminescent light	Yes
Shock resistance	Normal use
Water resistance	Not specified (avoid water)
Maintenance	Clean with soft cloth and clean water, avoid chemicals
Precautions	Do not open the case, avoid extreme temperatures, violent shocks

Frequently Asked Questions - K5525 Calypso

How to set the time on my Calypso K5525 watch?

Press button A for 2 seconds to enter setting mode. Use buttons B and C to adjust hours and minutes. Confirm by pressing A again.

How to use the timer function?

In timer mode, press button C to start or stop the countdown. When the time is up, an alarm will sound for 10 seconds. Press any button to silence it.

How to set the alarm?

Hold button B to enter alarm setting. Use buttons to set hours and minutes. Enable or disable alarm by pressing C.

How to change the battery of my watch?

The CR2016 battery must be replaced by a professional. Opening the case yourself may damage electronic components. Consult a certified watchmaker.

Is my watch water-resistant?

This watch is not designed for immersion. Avoid pressing buttons underwater and exposing it to moisture. If condensation appears inside, have it checked immediately.

How to turn on the electroluminescent light?

Press button D (or the dedicated button) to activate the backlight. Note that brightness may decrease over time and may be hard to see in direct sunlight.

What to do if condensation appears inside the watch?

Condensation indicates moisture ingress. Have the watch checked by a professional as soon as possible to prevent corrosion of electronic components.

How to set the second time zone?

In normal time mode, hold button B to access the second time zone. Set hours and minutes with buttons B and C.

The watch beeps every hour, how to disable the hour chime?

The hour chime can be enabled or disabled by pressing a button combination. Consult the full manual for the exact sequence, usually by holding A + B for a few seconds.

Where to find the full manual?

The full manual is available for free download in PDF format on the website notice-facile.com. You can also request a translation into your language via email.

USER MANUAL K5525 Calypso

graph TD
    A["~12:58"] --> B["12:00"]
    B --> C["12:00"]
    C --> D["12:00"]
    D --> E["12:00"]
    E --> F["12:00"]
    F --> G["12:00"]
    G --> H["12:00"]
    H --> I["12:00"]
    I --> J["12:00"]
    J --> K["12:00"]
    K --> L["12:00"]
    L --> M["12:00"]
    M --> N["12:00"]
    N --> O["12:00"]
    O --> P["12:00"]
    P --> Q["12:00"]
    Q --> R["12:00"]
    R --> S["12:00"]
    S --> T["12:00"]
    T --> U["12:00"]
    U --> V["12:00"]
    V --> W["12:00"]
    W --> X["12:00"]
    X --> Y["12:00"]
    Y --> Z["12:00"]
    Z --> AA["12:00"]
    AA --> AB["12:00"]
    AB --> AC["12:00"]
    AC --> AD["12:00"]
    AD --> AE["12:00"]
    AE --> AF["12:00"]
    AF --> AG["12:00"]
    AG --> AH["12:00"]
    AH --> AI["12:00"]
    AI --> AJ["12:00"]
    AJ --> AK["12:00"]
    AK --> AL["12:00"]
    AL --> AM["12:00"]
    AM --> AN["12:00"]
    AN --> AO["12:00"]
    AO --> AP["12:00"]
    AP --> AQ["12:00"]
    AQ --> AR["12:00"]
    AR --> AS["12:00"]
    AS --> AT["12:00"]
    AT --> AU["12:00"]
    AU --> AV["12:00"]
    AV --> AW["12:00"]
    AW --> AX["12:00"]
    AX --> AY["12:00"]

1. COMO UTILIZAR EL CRONÓGRAFO
   

graph LR
    A["12:58"] --> B["Time 0"]
    B --> C["18:0"]
    C --> D["28"]
    D --> E["12:58"]
    E --> F["Time 0"]
    F --> G["12:58"]

HORA NORMAL CRONOGRAFO INICIO CORRIENDO PARADA REAJUSTE HORA NORMAI

12:58'0 12:58'0

AVISO:

1. HOW TO DISPLAY CALENDAR
   

25 -12:58 NORMAL TIME CALENDAR 125

1. HOW TO SET NORMAL TIME
   

graph TD
    A["English F"] --> B["Normal Time Seconds"]
    B --> C{HOLD FOR 2 SECONDS}
    C --> D["SET SECONDS"]
    D --> E["SET HOURS"]
    E --> F["SET MINUTES"]
    F --> G["SET MONTHS"]
    G --> H["SET DATE"]
    H --> I["SET DAY OF WEEK"]
    I --> J["SET 12/24 FORMAT"]
    J --> K["English F"]

    subgraph SET SECONDS
        L["RESET SECONDS"]
        M["SET SECONDS"]
        N["SET HOURS"]
        O["SET MINUTES"]
        P["SET MONTHS"]
        Q["SET DATE"]
        R["SET DAY OF WEEK"]
    end

    subgraph SET HOURS
        S["12.58"]
        T["158"]
        U["12.59"]
        V["225"]
        W["126"]
        X["125"]
    end

    subgraph SET MINUTES
        Y["12.58"]
        Z["12.58"]
        AA["12.58"]
        AB["12.58"]
    end

    subgraph SET MONTHS
        AC["125"]
        AD["125"]
        AE["125"]
    end

    subgraph SET DATE
        AF["125"]
        AG["125"]
        AH["125"]
    end

    subgraph SET DAY OF WEEK
        AI["125"]
        AJ["125"]
        AK["125"]
    end

    subgraph SET 12/24 FORMAT
        AL["125"]
        AM["125"]
        AN["125"]
        AO["125"]
    end

1. HOW TO SET ALARM TIME
2. HOW TO USE ALARM AND CHIME DISPLAY
   

graph TD
    A["12:58"] --> B["12:00"]
    B --> C["12:00"]
    C --> D["1:00"]
    D --> E["+1 HOUR MINUTES"]
    E --> F["1:00"]
    F --> G["SECOND TIME ZONE ALARM"]
    G --> H["10:43"]
    H --> I["SECOND TIME ALARM +1 MINUTE"]
    I --> J["10:43"]
    J --> K["10:43"]
    K --> L["1:00"]
    L --> M["1:00"]
    M --> N["HOLD FOR 2 SECONDS"]
    style A fill:#f9f,stroke:#333
    style B fill:#f9f,stroke:#333
    style C fill:#f9f,stroke:#333
    style D fill:#f9f,stroke:#333
    style E fill:#f9f,stroke:#333
    style F fill:#f9f,stroke:#333
    style G fill:#f9f,stroke:#333
    style H fill:#f9f,stroke:#333
    style I fill:#f9f,stroke:#333
    style J fill:#f9f,stroke:#333
    style K fill:#f9f,stroke:#333
    style L fill:#f9f,stroke:#333
    style M fill:#f9f,stroke:#333

22

graph TD
    A["Normal Time Alarm Time Alarm ON ALARM ON/CHIME ON"] --> B["Clock icon: 12:00"]
    B --> C["Clock icon: 12:00"]
    C --> D["Clock icon: 12:00"]
    D --> E["Clock icon: 12:00"]
    E --> F["Clock icon: 12:00"]
    F --> G["Alarm OFF/CHIME OFF"]
    G --> H["Clock icon: 12:00"]
    H --> I["Alarm OFF/CHIME ON"]

23

1. HOW TO USE THE CHRONOGRAPH
   

graph LR
    A["12:58"] --> B["Normal Time Chronograph Start Running Stop Reset Normal Time"]
    B --> C["First Lap Read"]
    C --> D["Second Lap Counting"]
    D --> E["Second Lap Read"]
    E --> F["Last Lap Counting"]
    F --> G["Last Lap Read"]
    G --> H["Stop Time"]

    I["29:59"] --> J["Minutes"]
    J --> K["Seconds"]
    K --> L["HOURS"]
    L --> M["MINUTES"]

    N["28"] --> O["28"]
    O --> P["28"]

    Q["30"] --> R["30 Minutes"]
    R --> S["LAP"]

    T["100"] --> U["100 Seconds"]
    U --> V["100 Seconds"]

    W["17"] --> X["17"]
    X --> Y["17"]

    Z["22"] --> AA["22"]
    AA --> AB["22"]

    AC["31"] --> AD["31"]
    AD --> AE["31"]

    AF["31"] --> AG["31"]
    AG --> AH["31"]

    AI["12:58"] --> AJ["English F"]

1. HOW TO USE TIMER
   

graph TD
    A["SET TIMER"] --> B["NORMAL TIME TIMER SET HOURS +1 HOUR SET MINUTES +1 MINUTE SET SECONDS +1 SECOND"]
    B --> C["When the timer reaches zero, the alarm will sound three BEEPS (BI-BI-BI) per second for ten seconds. You can silence the alarm by pressing any button."]
    C --> D["SET TIMER SET 0:00:00"]
    D --> E["HOLD FOR 2 SECONDS"]
    E --> F["SET TIMER SET 1:00:00"]
    F --> G["SET TIMER SET 10:00"]
    G --> H["SET TIMER SET 10:10"]
    H --> I["TIMERSTART"]
    I --> J["SET TIMER SET 10:10"]
    J --> K["SET TIMER SET 10:15"]
    K --> L["SET TIMER SET 10:20"]
    L --> M["TIMERSTART"]
    M --> N["SET TIMER SET 10:25"]
    N --> O["SET TIMER SET 10:30"]
    O --> P["TIMERSTART"]

1. HOW TO SET SECOND TIME ZONE
2. HOW TO USE EL LIGHT
   

graph TD
    A["NORMAL TIME SECOND TIME ZONE +1 HOUR"] --> B["SET HOURS"]
    B --> C["SET MINUTES"]
    C --> D["30 MINUTES"]
    D --> E["HOLD FOR 2 SECONDS"]
    E --> F["158"]
    F --> G["SET MINUTES"]
    G --> H["SET HOURS"]
    H --> I["1258"]
    I --> J["1258"]
    J --> K["1258"]
    K --> L["1258"]
    L --> M["1258"]
    M --> N["1258"]
    N --> O["1258"]
    O --> P["1258"]
    P --> Q["1258"]
    Q --> R["1258"]
    R --> S["1258"]
    S --> T["1258"]
    T --> U["1258"]
    U --> V["1258"]
    V --> W["1258"]
    W --> X["1258"]
    X --> Y["1258"]
    Y --> Z["1258"]

-12:58 -12:58

NOTE:

1) This watch features an electro-luminescent (EL) backlight, which tends to lose illuminating power after very long use.
2) The illumination provided by backlight may be hard to see under direct sunlight.

11. CARE OF YOUR WATCH

1) This watch contains precise electronic components. Never attempt to open the case or remove the back cover.
2) Do not operate push buttons below the surface of the water when swimming or diving.
3) Should water or condensation appear in the watch, immediately have the watch checked. Water can corrode electronic parts inside the case.
4) Avoid severing impact: The watch is designed to with stand impact under normal use. It is inadvisable to subject it to severe impact of rough usage or drops onto hard surfaces.
5) Avoid exposing the watch to temperature extremes.
6) Clean the watch with a soft cloth and clean water only. Avoid using chemicals, especially soap.
7) Keep your watch away from the conditions of strong electric field and estatic electricity.

12. FEATURES AND SPECIFICATIONS

1) Standard display mode: Hour, minutes, seconds, month, day of week.
2) Function:
• Month, date AM/PM and Electro-Luminiscent light.
- Alarm function with buzzer signal output.
• Chronograph function with lap operation.
- Hourly chime.
• 12/24 hour format switch option.
- Timer.
- Second time zone.
3) Accuracy at normal temperature (25°C): ± 30 seconds a month.
4) Normal operating temperature range: 10°C - 40°C
5) Battery: CR2016

By virtue of the regulations pursuant to the handling of waste products deriving from electronic and electrical equipment, end of lifecycle watch making products must be selectively collected for processing. You may therefore dispose of your quartz watch making products at any of our retail outlets or any other authorized collection point. The selective collection, processing, rating and recycling of these products helps contribute to safeguarding the environment and protecting our health.

1. AFFICHAGE NORMALE ET BOUTON D'UTILISATION
   

JOUR DE LA SEMAINE A HEURE D'ALARME DATE FORMAT 12 HEURES AM/PM HEURE PM 12:58:48 D MINUTES SECONDS B SONNERIE DES HEURES D MINUTEUR CHRONOMETRE

BOUTONS D'UTILISATION

RÉGLAGE MODE

ADJUSTMENT, MARCHE/ARRETÉR LUMIÈRE

1. COMMENT CHANGER LE MODE D'AFFICHAGE
   

graph TD
    A["25"] --> B["5P"]
    B --> C["12:00"]
    C --> D["00:00"]
    D --> E["12:58"]
    E --> F["DEUXIEME ZONE D'HEURE MINUTEUR"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#cff,stroke:#333
    style F fill:#ffc,stroke:#333

1. COMMENT AFFICHER LE MOIS, LA DATE
   

HEURE NORMALE 12:58 125 MOIS DATE

1. COMMENT RÉGLER L'HEURE NORMALE
   

graph TD
    A["Heure Normale Secondes"] --> B["12:58"]
    B --> C["12:58"]
    C --> D["12:58"]
    D --> E["125"]
    E --> F["125"]
    F --> G["125"]
    G --> H["125"]
    H --> I["125"]
    I --> J["125"]
    J --> K["125"]
    K --> L["125"]
    L --> M["125"]
    M --> N["125"]
    N --> O["125"]
    O --> P["125"]
    P --> Q["125"]
    Q --> R["125"]
    R --> S["125"]
    S --> T["125"]
    T --> U["125"]
    U --> V["125"]
    V --> W["125"]
    W --> X["125"]
    X --> Y["125"]
    Y --> Z["125"]
    Z --> AA["125"]
    AA --> AB["125"]
    AB --> AC["125"]
    AC --> AD["125"]
    AD --> AE["125"]
    AE --> AF["125"]
    AF --> AG["125"]
    AG --> AH["125"]
    AH --> AI["125"]
    AI --> AJ["125"]
    AJ --> AK["125"]
    AK --> AL["125"]
    AL --> AM["125"]
    AM --> AN["125"]
    AN --> AO["125"]
    AO --> AP["125"]
    AP --> AQ["125"]
    AQ --> AR["125"]
    AR --> AS["125"]
    AS --> AT["125"]
    AT --> AU["125"]
    AU --> AV["125"]
    AV --> AW["125"]
    AW --> AX["125"]
    AX --> AY["125"]
    AY --> AZ["125"]
    AZ --> BA["125"]
    BA --> BB["125"]
    BB --> BC["125"]
    BC --> BD["125"]
    BD --> BE["125"]
    BE --> BF["125"]
    BF --> BG["125"]
    BG --> BH["125"]
    BH --> BI["125"]
    BI --> BJ["125"]
    BJ --> BK["125"]
    BK --> BL["125"]
    BL --> BM["125"]
    BM --> BN["125"]
    BN --> BO["125"]
    BO --> BP["125"]
    BP --> BQ["125"]
    BQ --> BR["125"]
    BR --> BS["125"]
    BS --> BT["125"]
    BT --> BU["125"]
    BU --> BV["125"]
    BV --> BW["125"]

1. CÓMMENT RÉGLER L'ALARME
2. COMMENT UTILISER L'AFFICHAGE ALARME ET CARILLON
   

graph TD
    A["HEURE NORMALE ALARME"] --> B["X2"]
    B --> C["12:00"]
    C --> D["12:00"]
    D --> E["100"]
    E --> F["+1 HEURE MINUTES"]
    F --> G["100"]
    G --> H["ALARME DE DEUXIÈME ZONE D'HEURE"]
    H --> I["101"]
    I --> J["ALARME HEURE NORMALE"]
    J --> K["+1 MINUTE"]
    K --> L["101"]
    L --> M["ALARME REGLAGE HEURE D'ALARME"]
    M --> N["101"]
    N --> O["SERBREZ 2 SECONDS"]

38

graph TD
    A["HEURE NORMALE HEURE ALARME SONNERIE MARCHE"] --> B["12:00"]
    B --> C["ALARME MARCHE"]
    C --> D["SONNERIE ARRÊT ALARME ARRE"]
    D --> E["SONNERIE ARRÊT ALARME MARCHE"]
    F["HEURE NORMALE HEURE ALARME SONNERIE MARCHE"] --> G["12:00"]
    G --> H["ALARME MARCHE"]
    H --> I["SONNERIE ARRÊT ALARME ARRE"]
    I --> J["SONNERIE ARRÊT ALARME MARCHE"]

39

1. COMMENT UTILISER LE CHRONOMÈTRE
   

graph LR
    A["HEURE 12:58""] --> B["Heure 30°"]
    B --> C["Heure 28°"]
    C --> D["Indicate 12:58""]
    E["AVANT 30 MINUTES A 2959""] --> F["Line 1*TEMPS INTERMEDIAIRE"]
    G["MINUTES SECONDS 1/100 SECONDS"] --> H["Line 1*TEMPS INTERMEDIAIRE COMPTE"]
    I["HEURES MINUTES 100""] --> J["Line 2*TEMPS INTERMEDIAIRE COMPTE"]
    K["FONCTION TEMPS INTERMEDIAIRE"] --> L["Line 2*TEMPS INTERMEDIAIRE COMPTE"]
    M["DERNIRER CHRONOMETRE COMPTE"] --> N["Line 31°"]
    O["INDICATION DERNIRER CHRONOMETRE"] --> P["Line 31°"]

1. POUR UTILISER LE MINUTEUR DU COMPTE A REBOURS
   

ORA NORMALE 12:58:48 125 MESE DATA

1. PER REGOLARE L'ORA NORMALE
   

graph TD
    A["ORA NORMALE SECONDI ORE MINUTI MESI DATA"] --> B["12:58"]
    B --> C["12:58"]
    C --> D["12:58"]
    D --> E["125"]
    E --> F["125"]
    F --> G["125"]
    G --> H["125"]
    H --> I["FORMATO 12H"]
    J["AZZERAMENTO SECONDI"] --> K["12:58"]
    K --> L["158"]
    L --> M["+1 MINUTO+1 ORA"]
    M --> N["12:59"]
    N --> O["2:25"]
    O --> P["126"]
    P --> Q["SCATTARE GIORNOSCATTARE DATA"]
    Q --> R["125"]
    R --> S["FORMATO 12H"]

1. PER METTERE LA SVEGLIA
2. PER UTILIZZARE IL DISPLAY SVEGLIA E SONERIA
   

graph TD
    A["ORA NORMALE SVEGLIA"] --> B["12:00"]
    B --> C["12:00"]
    C --> D["+ 1 ORA"]
    D --> E["100"]
    E --> F["REGOLAZIONE DEI MINUTI"]
    F --> G["+ 1 MINUTO"]
    G --> H["SVEGLIA SECONDO FUSO ORARIO"]
    H --> I["10:00"]
    I --> J["Display REGOLAZIONE ORA SVEGLIA"]
    J --> K["12:00"]
    K --> L["+ 1 ORA"]
    L --> M["100"]
    M --> N["REGOLAZIONE DEI MINUTI"]
    N --> O["+ 1 MINUTO"]
    O --> P["SVEGLIA ORA NORMALE"]
    P --> Q["10:00"]
    Q --> R["Display REGOLAZIONE ORA SVEGLIA"]
    R --> S["+ 1 ORA"]
    S --> T["100"]
    T --> U["REGOLAZIONE DEI MINUTI"]
    U --> V["+ 1 MINUTO"]
    V --> W["SVEGLIA SECONDO FUSO ORARIO"]
    W --> X["10:00"]
    X --> Y["Display REGOLAZIONE ORA SVEGLIA"]
    Y --> Z["+ 1 ORA"]
    Z --> AA["100"]
    AA --> AB["REGOLAZIONE DEI MINUTI"]
    AB --> AC["+ 1 MINUTO"]
    AC --> AD["SVEGLIA SECONDO FUSO ORARIO"]
    AD --> AE["10:00"]
    AE --> AF["Display REGOLAZIONE ORA SVEGLIA"]
    AF --> AG["+ 1 ORA"]
    AG --> AH["100"]
    AH --> AI["REGOLAZIONE DEI MINUTI"]
    AI --> AJ["+ 1 MINUTO"]

70

graph TD
    A["ORA NORMALE ORA SVEGLIA"] --> B["X2"]
    B --> C["SVEGLIA ATTIVATA"]
    C --> D["SVEGLIA ATTIVATA/SONERIA ATTIVATA"]
    D --> E["SVEGLIA DISATTIVATA SONERIA DISATTIVATA"]
    E --> F["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    F --> G["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    G --> H["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    H --> I["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    I --> J["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    J --> K["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    K --> L["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    L --> M["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    M --> N["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    N --> O["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    O --> P["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    P --> Q["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    Q --> R["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    R --> S["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    S --> T["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    T --> U["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    U --> V["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    V --> W["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    W --> X["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    X --> Y["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    Y --> Z["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    Z --> AA["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AA --> AB["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AB --> AC["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AC --> AD["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AD --> AE["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AE --> AF["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AF --> AG["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AG --> AH["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AH --> AI["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AI --> AJ["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AJ --> AK["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AK --> AL["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AL --> AM["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AM --> AN["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AN --> AO["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AO --> AP["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AP --> AQ["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AQ --> AR["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AR --> AS["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AS --> AT["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AT --> AU["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AU --> AV["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AV --> AW["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AW --> AX["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AX --> AY["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AY --> AZ["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    AZ --> BA["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BA --> BB["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BB --> BC["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BC --> BD["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BD --> BE["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BE --> BF["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BF --> BG["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BG --> BH["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BH --> BI["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BI --> BJ["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BJ --> BK["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BK --> BL["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BL --> BM["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BM --> BN["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BN --> BO["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BO --> BP["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BP --> BQ["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BQ --> BR["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BR --> BS["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BS --> BT["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BT --> BU["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BU --> BV["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]
    BV --> BW["SVEGLIA DISATTIVATA SONERIA ATTIVATA"]

71

1. PER UTILIZZARE IL CRONOGRAFO
   

graph LR
    A["ORA NORMALE CRONOGRAFO INIZIO ATTIVAZIONE STOP AZZERARE ORA NORMALE"] --> B["Step B"]
    B --> C["Step C"]
    C --> D["Step D"]
    D --> E["Step E"]
    E --> F["Step F"]
    F --> G["72 MINUTI"]
    G --> H["73"]

    subgraph Time_Steps
        I["MINUTI 1/100 DI SECONDO"] --> J["2959 SECONDI"]
        K["ORE 100 SECONDI"] --> L["MINUTI"]
    end

    subgraph Metric_Steps
        M["LETTURA PRIMO GIRO"] --> N["CONTEGGIO SECONDO GIRO"]
        O["LETTURA SECONDO GIRO"] --> P["LETTURA ULTIMO GIRO"]
        Q["CONTEGGIO ULTIMO GIRO"] --> R["LETTURA ULTIMO GIRO"]
        S["ULTIMA LETTURA MOSTRATA"] --> T["ULTIMA LETTURA MOSTRATA"]
    end

1. PER UTILIZZARE IL CONTO ALLA ROVESCIA
   

12:58' 12:58'

NOTARE: