10031385 - Kettle Klarstein - Free user manual and instructions

Frequently Asked Questions - 10031385 Klarstein

USER MANUAL 10031385 Klarstein

• Please read these instructions carefully before using the water kettle for the first time.

• This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years.

• Children shall not play with the appliance

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• If the kettle is overfilled, boiling water may be ejected.

• Kettle is only to be used with the stand provided.

• The aooliance is not designed for commercial use. It is intended for use in domestic households and in simi- lar working and residential environments.

• Avoid spillage on the connector.

• Heating element surface is subject to residual heat after use.

• This appliance is not intended to heating liquid other than water.

• Use the kettle according to this instruction, any misuse may cause electric shock or other hazards.

• Do not operate the kettle if damaged, after an appliance malfunctions or it has been damaged in any man- ner, return to the customer service department for repair, because special purpose tools are required.

• Before you connect the kettle to the mains supply, make sure that the voltage indicated on the rating plate, located on the bottom of the water kettle matches the mains voltage in your home. If it does not, contact your dealer and do not use the kettle. Hints on Use

• The kettle will switch off automatically when the water has boiled. If you want to stop the heating process before the kettle automatically switches off, press the ON/OFF switch up.

• After the kettle has switched off automatically (or has been switched off manually) it may need time to cool down. After 15-20 seconds, the kettle can be switched on again.

• Always fill the kettle with water before switching it on.

• The kettle is designed to disconnect the live electrical supply from the element abnormal operating condi- tions. If the water kettle is accidentally switched on without water, the boil dry protector will operate.

• If the kettle ever boils dry, the power indicator will go out. Allow 15 minutes to cool before refilling with cold water. The safety cutout will automatically reset during this time.6

• Place the kettle on a stable flat surface. Do not use this appliance outdoors.

• Ensure that the kettle is switched off before removing it from its base.

• Do not remove the kettle from its base during operation.

• Never immerse the kettle or cord in water or any other liquid. Do not allow liquid to penetrate the electrical parts of this kettle.

• Prevent children from pulling on the mains cord or knocking the kettle over.

• Ensure that the mains lead does not overhang the worktop surface.

• The outside surface of the kettle may get hot during use, please take care when using the kettle.

• Never fill in water more than the maximum acceptable water level. Never use the kettle with the lid open.

• Do not open the lid when steam is coming out of the spout.

• Before cleaning the kettle disconnect from the power supply and wait until it was cooled down. Product Description 1 Lid 2 Lid button 3 Handle 4 Body 5 Switch button 6 Base Before first Use Before first use, it is recommended to operate the kettle for 2 or 3 times following the instructions above, this will remove any dust or residues remaining from the manufacturing process.7 Use and Operation

• Take up the jug kettle from the base before filling.

• To fill the jug kettle, open the cover by press the lid button downwards, then fill to the desired level (min 0.5L-Max.1.5L), close the lid by pressing it down until it clicks into place.

• Plug the power supply cord into the main, press the On/Off switch down, the power indicator lights up.

• When the water has boiled the kettle will automatically switch itself off, you can stop the boiling process at any time by lifting the On/Off switch. The power indicator will go out. Cleaning and Care

• Avoid using abrasive cleaning agents.

• Empty the kettle and allow to cool, open the lidlift out the filter, rinse the filter under warm water and brush off any impurities.