REMINGTON Thermacare Pro 2400 D5720 - Hair Dryers

Thermacare Pro 2400 D5720 - Hair Dryers REMINGTON - Free user manual and instructions

Find the device manual for free Thermacare Pro 2400 D5720 REMINGTON in PDF.

📄 76 pages PDF ⬇️ English EN 💬 AI Question 8 questions ⚙️ Specs 🖨️ Print
Notice REMINGTON Thermacare Pro 2400 D5720 - page 3
Manual assistant
Powered by ChatGPT
Waiting for your message
Product information

Brand : REMINGTON

Model : Thermacare Pro 2400 D5720

Category : Hair Dryers

Technical Features REMINGTON Thermacare Pro 2400 D5720 Hair Dryer
Power 2400 W
Thermacare Technology Reduces heat damage
Airflow 75 km/h
Speed and Temperature 3 speeds and 3 temperatures
Cold Air Function Yes
Included Accessories Concentrator and diffuser
Usage Ideal for quick drying and professional styling
Maintenance Removable grille for easy cleaning
Safety Overheat protection system
General Information 2-year warranty

Frequently Asked Questions - Thermacare Pro 2400 D5720 REMINGTON

How can I adjust the temperature of my REMINGTON Thermacare Pro 2400 D5720 hair dryer?
The hair dryer has multiple temperature settings. To adjust the temperature, use the control button located on the body of the device. You can choose between low, medium, and high temperatures.
My hair dryer is not working, what should I do?
First, check that the device is properly plugged in and that the outlet is working. If the problem persists, try resetting the device by unplugging it for a few minutes, then plugging it back in. If this does not work, contact customer service.
How do I clean the filter of my hair dryer?
To clean the filter, carefully remove it following the instructions in the manual. Use a soft brush or a dry cloth to remove dust and lint. Make sure to put the filter back in place after cleaning.
Is the REMINGTON Thermacare Pro 2400 D5720 suitable for fine hair?
Yes, this hair dryer is equipped with heat settings that allow gentle drying of fine hair without damaging it. Use a low heat setting for optimal drying.
What is the power of the REMINGTON Thermacare Pro 2400 D5720 hair dryer?
The power of this hair dryer is 2400 watts, allowing for quick and efficient drying.
Can I use the hair dryer on wet hair?
Yes, the hair dryer is designed to be used on wet hair, but it is recommended to blot excess water with a towel before starting to dry.
Is there an overheat protection function?
Yes, the REMINGTON Thermacare Pro 2400 D5720 is equipped with an overheat protection function that automatically turns off the device in case of overheating to ensure your safety.
How can I use the ionic function of my hair dryer?
The ionic function is automatically activated when you turn on the hair dryer. It helps reduce frizz and improve the shine of your hair during drying.

Download the instructions for your Hair Dryers in PDF format for free! Find your manual Thermacare Pro 2400 D5720 - REMINGTON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Thermacare Pro 2400 D5720 by REMINGTON.

USER MANUAL Thermacare Pro 2400 D5720 REMINGTON

Thank you for buying your new Remington® product. Please read these instructions carefully and keep them safe. Remove all packaging before use. IMPORTANT SAFEGUARDS

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been supervised/instructed and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children unless they are older than 8 and supervised. Keep the appliance and cable out of reach of children under 8 years.

Do not use this appliance near bathtubs, showers, basins or other vessels containing water.

  • When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off.
  • For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom*.
  • Currently, the tting in a bathroom of an electrical socket suitable or capable of operating the appliance is not permitted in the UK (see BS7671).
  • If the supply cord of this unit becomes damaged, discontinue use immediately and return the appliance to your nearest authorised Remington® service dealer for repair or replacement in order to avoid a hazard.
  • Always ensure the voltage to be used corresponds to the voltage stated on the unit before plugging the appliance into the mains socket.
  • Keep direct airow away from eyes or other sensitive areas.
  • Do not allow any part of the appliance touch the face, neck or scalp.
  • During use, always ensure the inlet and outlet grilles are not blocked in any way as this will cause the unit to automatically stop. If this should occur, switch o and allow the unit to cool.
  • Keep the power plug and cord away from heated surfaces. ENGLISH
  • Do not leave the appliance unattended while plugged in.
  • Do not place the appliance on any soft furnishings.
  • Do not use attachments other than those we supply.
  • Do not set the appliance down while still on.
  • Do not twist or kink the cable, or wrap it round the appliance.
  • Do not use the appliance if it is damaged or malfunctions.
  • Check the cord regularly for any sign damage.
  • This appliance is not intended for commercial or salon use. PARTS

2. Heat selector switch (N, O, P)

1. Wash and condition your hair as normal.

2. Squeeze out excess moisture with a towel and comb through.

Hairsprays contain ammable material – do not use while using this product.

3. Attach the concentrators or diuser by tting it to the front of the hairdryer and

twisting clockwise to lock it.

4. Plug the product into the mains power supply.

5. Switch your hairdryer on and select the desired speed setting (low F or high E) using

the speed selector switch.

6. Select the desired heat setting (low N, medium O or high P) using the heat selector

button ( ) downwards and hold it there. Release the button to return to normal drying.

8. After use, turn the appliance o and unplug it.

9. Let the appliance cool down before cleaning or storing away.

  • For fast drying use the high heat / high speed function.
  • To create smooth styles use the concentrator and a round hair brush (not included) whilst drying. ENGLISH5
  • To enhance natural curls and waves, attach the diuser to the dryer. Turn your head upside down and gently place your hair into the diuser bowl slightly rotating the dryer as you style.
  • To create extra volume at the roots of the hair, keep your head upright and place the diuser against the top of the head. Gently rotate the hairdryer allowing the diuser ngers to gently massage the scalp being careful not to burn the scalp. Dry gently on a medium heat / low speed setting. Caution: Do not use the diuser on the highest heat setting (P).
  • To set your style, press the cool shot button ( ) upwards and hold it there while styling. Release the button to return to normal drying.

CLEANING AND MAINTENANCE

  • Unplug the appliance and allow to cool.
  • To maintain peak product performance and to prolong motor life, it is important to regularly remove any dust and dirt from the inlet grille.
  • Remove the grille as shown (FIG A), clean with a cloth or soft brush, then replace it. RECYCLING

To avoid environmental and health problems due to hazardous substances, appliances and rechargeable and non-rechargeable batteries marked with one of these symbols must not be disposed of with unsorted municipal waste. Always dispose of electrical and electronic products and, where applicable, rechargeable and non-rechargeable batteries, at an appropriate ocial recycling/ collection point. ENGLISH