HSM 8007 NE CB - Beard trimmer BOMANN - Free user manual and instructions

USER MANUAL HSM 8007 NE CB BOMANN

Product photo of a BOMANN electric toothbrush and two black-and-white hairbrushes (no text or symbols visible)

Location of Controls 3

User manual....46

Hair and beard clippers....47

Nose and ear hair trimmer....50

Technical Specifications....52

Disposal....53

Spis treści

PL

Strona

WARNUNG: EXPLOSIONSGEFAHR!

Close-up of a cylindrical object with two black arrows pointing to its surface (no text or symbols visible)

Benutzung

WAARSCHUWING: ONTPLOFFINGSGEVAAR!

WAARSCHUWING: GEVAAR VOOR LETSEL!

Close-up of a cylindrical object with two arrows pointing to a dark top, labeled 'NL' in the corner (no other text or symbols)

Gebruik

Close-up of a cylindrical object with two black arrows pointing to its surface (no text or symbols visible)

Utilisation

Batterie rechargeable

Pile: 1x 1,5 V, Type : MIGNON LR6, AA, UM3

4 X Peines guías (longitudes: 3 mm, 6 mm, 9 mm, 12 mm)

Close-up of a cylindrical object with two black arrows pointing to its surface (no text or symbols visible)

Uso

Close-up of a cylindrical object with two black arrows pointing to its surface (no text or symbols visible)

Utilizzo

Thank you for choosing our product. We hope you will enjoy using the appliance.

General Notes

Before using this device, carefully read this user manual and keep it together with the Warranty Certificate, cashier receipt and if possible, the original package inclusive its interior packing. If you hand on the device to any third person, include the user manual as well.

• Use the device for private and its intended purpose only. The device is not intended for commercial use.
• Do not use the device outdoors. Protect it from heat, direct sunlight, humidity (do not immerse into liquids under any circumstances) and sharp edges. Do not use the device with wet hands. If the device gets wet, unplug it immediately.
• Always switch off and unplug the device (pull the plug, not the cable) when you do not use the device, or when you attach accessories, during cleaning or malfunctioning.
• Do not leave the device unattended during operation. Always switch off the device when leaving the room. Unplug the device.
• Regularly check the device and cable for signs of damage. Do not continue to operate the device in case of damage.
• Do only use original parts.
• For the safety of your children, keep any packing parts (plastic bags, cartilage, Styrofoam etc.) out of their reach.

GB

WARNING:

Don't let small children play with foils for danger of suffocation!

Symbols in this user manual

Important notes for your safety are marked distinctively. Pay absolute attention to them to avoid accidents and damage to the device:

WARNING:

Warns of dangers for your health and indicates potential risks of injury.

CAUTION:

Indicates potential dangers for the device or other objects.

NOTE: Highlights tips and information for you.

Handling of batteries

WARNING: DANGER OF EXPLOSION!

Do not expose the batteries to high temperatures or direct sunlight. Never throw batteries into fire.

Hair and beard clippers

Special safety instructions for this appliance

RISK OF ELECTRIC SHOCK!

• Do not use the device near water (e.g. bath tub, wash basin or other containers filled with water.

• Caution: Keep the appliance dry.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Children shall not play with the appliance.

• Cleaning and user maintenance shall not be made by children without supervision.

• Do not repair the device by yourself. Please contact authorized personnel. In order to avoid hazards, a damaged mains cable must be replaced with an equivalent cable by the manufacturer, our customer service or any other qualified specialist.

• Do not operate the hair and beard clippers with wet hands.
• Only cut dry hair with this unit.
• Only use this unit to cut head hair and beard.
• Do not press the clipper head too firmly onto the skin. Danger of injury.

Location of Controls

1 Suspension eye
2 On/Off switch
3 Hair length adjuster
4 Moving blade
5 Fixed blade

Accessories (no illustration)

4 X Comb attachments (lengths: 3 mm, 6 mm, 9 mm, 12 mm)

1 X Protective cap for shaving head
1 X Cleaning brush

Adjust Cutting Length

• First remove the protective cap from the shaving head.
• Fit a comb attachment according to your desired hair length. The size of the hair length setting is displayed in the center of the comb attachment.
• In order to fit a comb attachment, hold it with the teeth pointing upwards. The labeling of the comb attachment should remain visible on the back. Slide the comb attachment onto the shaving head and press it in so that it clicks into place.

Cut Hair / Beard

• Select the cutting length.
• Connect the mains plug to a properly installed isolated ground receptacle 230 V\~ / 50 Hz.
• Slide the On/Off switch (2) to position "1".

NOTE:

• Start by using the biggest comb attachment and cut your hair/whisker step by step to the desired length.
• The hair length adjuster (3) allows you to set the exact cutting length and to use the comb attachments effectively.

Outlining and Shaving the Neck

• The clipper head allows outlining the shape of the beard, even in difficult to reach places as well as shaving the hairline at the neck.
• Turn the hair clipper off with the switch (2).
• Remove the comb attachment and turn the device on again.

Finish Operation

Slide the On/Off switch (2) after use to the position "0" and disconnect from the mains.

Cleaning and Maintenance

Regular cleaning and maintenance ensures optimum results and long lifetime.

WARNING:

• Turn the device off and disconnect the mains plug.
• Do not submerge the unit in water. This would cause electric shock or fire.

CAUTION:

• Do not use a wire brush or other abrasives.
• Do not use sharp or abrasive cleaning agents.
• Use the cleaning brush to remove remaining hair after use.
  • Therefore, take off the comb attachment.
• Regularly apply 1 - 2 drops acid-free oil to the clipper head.
• Clean the casing with a slightly damp cloth, if necessary.

Nose and ear hair trimmer

Special instructions for this appliance

WARNING: RISK OF INJURIES!

• Do not use the appliance if the shaving head, blade holder or blade are deformed or damaged!
• Do not remove the shaving head during operation!
• Do not introduce the appliance further into the nostril / auricle than to the narrow tip of the shaving head.

CAUTION:

• The shaving head and blade are precision-machined and must not to be exposed to heavy loading, impacts or similar.
• Do not put any sharp objects into the shaving head.
• Protect the appliance from moisture or liquids.
• This appliance is only meant for removing nose and ear hair. Do not use the appliance for any other purposes.
• Switch off the appliance before cleaning and removing the batteries.

Scope of delivery (without fig.)

1 Nose and ear hair trimmer
1 Protective cap for the shaving head

Inserting of the battery

(Battery is not included in the scope of delivery)

1. Turn the bottom cover and pull it off.
2. Insert a 1.5 V battery of the type MIGNON AA into the battery compartment. The positive pole (+) has to show towards the shaving head.
3. Close the battery compartment again: Turn the cover onto the device until it engages with a click. The flattened part of the cover must be positioned exactly under the flattened part of the device (see Fig.).

Close-up of a cylindrical object with two black arrows pointing to its surface (no text or symbols visible)

Usage

1. Pull the protective cap off.
2. Slide the switch towards "0" in order to turn on the appliance.
3. Guide the tip of the shaving head into the nostril or auricle.

WARNING:

Only remove the prominent nose or ear hair. Do not forcefully push the appliance into the nostril / auricle. You can hurt yourself when it is inserted too deep!

1. Slide the switch back towards "1" after usage in order to switch off the device.
2. Clean the shaving head with the cleaning brush after usage.
3. Set the protective cap onto the device.

Cleaning

WARNING:

• Do not submerge the unit in water.
  • The cutting blade is sharp. Do not touch it! There is the danger of injuries.

CAUTION:

• Do not use a wire brush or other abrasives.

• Do not use sharp or abrasive cleaning agents.

• Switch off the appliance before cleaning.

• Remove the battery from the battery compartment.
• Loosen the shaving head by turning it anticlockwise and remove it. Remove the cutting blade holder carefully.
• Remove remaining hair from the blade holder using the cleaning brush. You can also blow off the remaining hair from the holder.
• Replace the cutting blade holder into the cutting head.
• Set the cutting head onto the device. Turn it tight clockwise until it snaps audibly into place.
• Set the protective cap onto the device.

Noise emission

The workplace-related emission value is less than 70 dB(A).

Technical Specifications

Model: HSM 8007 NE CB

Net weight: .... approx. 0.435 kg

Hair and Beard trimmer

Power supply: 220 -240 V\~, 50 Hz

Power consumption: max. 10 W

Protection class:....II

Nose and ear hair trimmer

Battery: 1x 1.5 V, Type: MIGNON LR6, AA, UM3

The right to make technical and design modifications in the course of continuous product development remains reserved.

This device complies with all current CE directives, such as electromagnetic compatibility and low voltage directive and is manufactured according to the latest safety regulations.

Disposal

Meaning of the "Wheelie Bin" Symbol

Take care of our environment, do not dispose of electrical appliances via the household waste.

Dispose of obsolete or defective electrical appliances via municipal collection points.

Please help to avoid potential environmental and health impacts through improper waste disposal.

You contribute to recycling and other forms of utilization of old electric and electronic appliances.

Your municipality provides you with information about collecting points.

Dispose of Rechargeable Batteries

• Remove the batteries from the battery compartment of the nasal hair/ear hair remover.
• Dispose of the battery at an appropriate collection point or distributor. This product must not be disposed of in standard domestic refuse.

GB

Close-up of a cylindrical object with two black arrows pointing to its surface (no text or symbols visible)

Usage

Model....HSM 8007 NE CB

Waga netto: ok 0,435 kg

Adapter zasilania Trymer do brody

Zasilanie: 220 -240 V\~, 50 Hz

CTC Clatronic Sp. z o.o

Close-up of a cylindrical object with two black arrows pointing to its surface (no text or symbols visible)

Használat

Close-up of a cylindrical object with two black arrows pointing to its surface (no text or symbols visible)

Використання

Close-up of a cylindrical object with a dark base and two black arrows pointing to it (no text or symbols visible)

Использование