ManualGo.com 
UniversalDrill 18 - Drill BOSCH - Free user manual and instructions
Find the device manual for free UniversalDrill 18 BOSCH in PDF.
Download the instructions for your Drill in PDF format for free! Find your manual UniversalDrill 18 - BOSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UniversalDrill 18 by BOSCH.
USER MANUAL UniversalDrill 18 BOSCH
0–4400–440 –2. Gangmin
(8) Worklight (9) Rotational direction switch (10) On/off switch (11) Handle (insulated gripping surface) (12) Universal bit holder
Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range. Technical Data Cordless drill/driverUniversalDrill18VUniversalImpact18V Article number 3603JD40..3603JD41.. Rated voltageV1818 No-load speed A)B) 1 609 92A 5UK | (21.09.2020)Bosch Power ToolsEnglish | 15 Cordless drill/driverUniversalDrill18VUniversalImpact18V –First gearmin
0–4400–440 –Second gearmin
Nm4034 Impact rate at no-load speed
–0–21,750 Max. drilling diameter (1st/2nd gear) –Masonrymm–10 –Steelmm1010 –Woodmm3030 Chuck capacitymm1010 Max. screw diametermm88 Max. impact drilling diametermm–6 Weight according to EPTA-Procedure 01:2014
kg1.2 (1.5Ah)–1.6 (6.0Ah)1.3 (1.5Ah)–1.6 (6.0Ah) Recommended ambient temperature during charging °C0 to +350 to +35 Permitted ambient temperature during opera- tion
and during storage °C–20 to +50–20 to +50 Recommended rechargeable batteriesPBA 18V...W-.PBA 18V...W-. Recommended chargers
Measured at 20−25°C with rechargeable batteryPBA 18V 1.5Ah. B)Depends on battery in use C)Limited performance at temperatures <0°C D)The following chargers are not compatible with the PBA rechargeable battery: AL 1814 CV Professional, AL 1820 CV Professional, AL 1860 CV Professional, AL 2215 CV Professional Noise/Vibration Information UniversalDrill18VUniversalImpact18V Noise emission values determined according to EN62841-2-1. Typically, the A-weighted noise level of the power tool is Sound pressure level Sound power level Uncertainty K Wear hearing protection! dB(A) dB(A)
(triax vector sum) and uncertainty K determined according to EN62841-2-1: Drilling into metal:
Impact drilling in brick:
0–4400–440 –Stand2min
0–4400–440 –2.брзинаmin
www.bosch-pt.com/serviceaddresses
0–4400–440 –2.stopnjamin
www.bosch-pt.com/serviceaddresses
EU Declaration of Conformity We declare under our sole responsibility that the stated products comply with all applicable provisions of the directives and regulations listed below and are in conformity with the following standards. Technical file at: * Cordless drill/dri- ver Article number
