GRW 1414.1 - Mixer Güde - Free user manual and instructions
Find the device manual for free GRW 1414.1 Güde in PDF.
| Product type | Mixer (paddle) |
| Brand | Güde |
| Model | GRW 1414.1 |
| Order number | 58043 |
| Power supply | 230 V ~ 50 Hz |
| Maximum power | 1400 W |
| No-load speed | 0-800 min⁻¹ |
| Mixer attachment | M14 |
| Maximum mixing paddle diameter | 140 mm |
| Protection class | II |
| IP protection rating | 20 |
| Maximum mixing volume | 65 L |
| Weight | 4.5 kg |
| Sound pressure level (LpA) | 87 dB |
| Sound power level (LWA) | 98 dB(A) |
| Measured vibration value (ah,D) | 5.45 m/s² |
| Intended use | Mixing plaster, mortar, glue, paint |
| Required protective equipment | Safety goggles, hearing protection, respirator mask |
| Recommended residual current device | Residual current device (RCD) 30 mA max |
| Maintenance | Clean with damp cloth, no water or solvents |
| Supplied accessories | Mixing paddles for mortar and paint |
Frequently Asked Questions - GRW 1414.1 Güde
User questions about GRW 1414.1 Güde
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Mixer in PDF format for free! Find your manual GRW 1414.1 - Güde and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GRW 1414.1 by Güde.
USER MANUAL GRW 1414.1 Güde
ENGLISH Please read the instructions carefully before starting the machine.
WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when it is running but not actually in use. This may significantly reduce the vibratory load over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.
Read and understand the operating instructions before using the appliance. Familiarise with the
control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties.
The operator is responsible for accidents or risks to third parties.
Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under supervision of the trainer during occupational education.
In case of any doubts about connection and operation refer please to our customer center
Specified Conditions Of Use
The stirrer may only be used to stir plaster, mortar, glue or paint.
The device must not be used as a drill or drive for any other device, e.g. for polishing, grinding, sharpening, engraving with special adapters.
Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.
Residual risks
Even when the device is used properly and all safety regulations are complied with, there still may be some residual risks.
- Risk of crushing
Contact with the rotating stirrer
Cutting injury
When touching the rotating stirrer - Hearing damage
A longer stay in the immediate vicinity of the running unit may cause hearing damage. Wear ear protectors! - Damage to health arising from vibrations to hand and arms if the device is used for a long time or if the device is not guided and evaluated properly.
Despite the observance of the operating instructions there still may be some hidden residual risks.
Emergency procedure
Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. For the sake of eventual accident, in accordance with DIN 13164, a workplace has to be fitted with a first-aid kit. It is essential to replace any used material in the first-aid kit immediately after it has been used.
If you seek help, state the following pieces of information:
- Accident site
- Accident type
- Number of injured persons
- Injury type(s)
Symbols
WARNING/CAUTION!
WARNING - Read the operating instructions to reduce the risk of injury.
Wear eye protective goggles! Wear ear protectors!
Wear a respirator!
Unplug the machine before any work on it.
For a mixture of e.g. mortar, grouts, cement, whitewash, concrete, screed, etc.
For a mixture of e.g. glues, varnishes, paints, etc.
CE marking
Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centres.
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
Safety information for agitators
Operation is only allowed with a safety switch against stray current (RCD max. stray current of 30mA ).
Keep children and other persons including animals in a safe distance when using the appliance.
Wear suitable work clothing such as sturdy shoes with non-slip sole, safety glasses and hearing protection!
The dust produced when using this tool may be harmful to health. Do not inhale the dust. Use a dust absorption system and wear a suitable dust protection mask. Remove deposited dust thoroughly, e.g. with a vacuum cleaner.
Do not wear loose clothing or jewels as they could get caught by the rotating parts. Do not use the device when you go barefoot or wear open sandals.
Please turn the device immediately off when the tool used gets blocked! Do not turn the device on again when the tool is still blocked. This could cause bounce back with a high reaction moment. Determine and remove the cause of the blocking of the tool used while respecting the safety instructions.
Possible causes include:
- Jamming
Overload of power tools
Do not reach into the running device.
Always keep the connection cable from the working area of the device. Always guide the cable back - wards, away from the device!
Check all screw and plug-in connections and protective equipment if firm and tightened properly and whether all moving parts are running smooth whenever the appliance is to be put into operation.
The appliance must not be used if damaged or safety equipment is defective. Replace any worn-out and damaged parts.
Do not use the device near flammable liquids or gases. Risk of fire and explosion in case of short circuit.
Work instructions
Do not reach into the rotating mixer (rotating stirrer).
Hold the device firmly with two hands and away from your body.
Avoid splashing! Work with low revolutions when immersing or removing the mixed to / from the mixture being stirred.
The stirring extensions included in the supply are suitable for stirred materials with heavier and tougher consistency: e.g. mortar, grouts, cement, plaster, whitewash, concrete, screed, etc.
- Increase the revolutions when stirring. Run the mixer in the mixture being stirrer until it is completely mixed. Follow the processing instructions of the manufacturer.
- Do not work with low revolutions in continuous operation. This would lead to engine overload / overheating.
Maintenance
Unplug the machine before any work on it.
Repairs and works specified in these Instructions may only be performed by qualified authorised staff. Use only original accessories and original spare parts.
Keep the device, in particular the air vents, clean at all times. Never spray water on the device body! Do not clean the plastics with solvents, flammable or toxic fluids. For cleaning, use a damp cloth only.
After each use, clean the stirring mechanism properly.
Caution! If the power cord of the appliance gets damaged, it must be replaced by the manufacturer or its customer service or a similarly qualified person to avoid danger.
Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.
If necessary, a list of spare parts can be found at www.guide.com.
Service
Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bureaucracy at our web pages at www.guide.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label. Please enter it here for future reference
Serial No.:
Art.No:
Year of production:
\section*{Caracteristiques Techniques}
WAARSCHUWING/OPGELET!
Translation of the EC-Declaration of Conformity
We, hereby declare the conception and construction of the below mentioned appliances correspond - at the type of construction being launched - to appropriate basic safety and hygienic requirements of EC Directives.
In case of any change to the appliance not discussed with us the Declaration expires.
Notified Body Name: No: Adress:
Type Ex.Cert-No.:
97/68/EC_&2016/1628/EU Emission No.:
2000/14/EC_2005/88/EC
