BBottle - Bottle warmer Bo Jungle - Free user manual and instructions

Technical Features	Compatible with most milk and baby drink bottles.
Heating Capacity	Quickly heats bottles in a few minutes.
Heating Modes	Steam and water bath heating function.
Usage	Easy to use with a single control button.
Maintenance	Easy to clean with a damp cloth, do not immerse in water.
Safety	Overheat protection system.
General Information	Compact and lightweight, ideal for use at home or while traveling.

Frequently Asked Questions - BBottle Bo Jungle

How do I use the Bo Jungle BBottle bottle warmer?

To use the Bo Jungle BBottle bottle warmer, fill the water reservoir, place the bottle in the designated compartment, select the desired temperature, and press the start button.

How long does it take to heat a bottle?

Heating time depends on the initial temperature of the milk and the desired temperature, but it usually takes between 5 and 10 minutes.

Can the bottle warmer heat food in addition to milk?

Yes, the Bo Jungle BBottle bottle warmer can also be used to warm baby food in appropriate containers.

Is the bottle warmer compatible with all bottles?

The Bo Jungle BBottle is designed to fit most standard bottles, but it is recommended to check your bottle's dimensions before use.

What should I do if the bottle warmer is not working?

Make sure the device is properly plugged in and the reservoir is filled with water. If the problem persists, consult the user manual or contact customer service.

How do I clean the bottle warmer?

Unplug the device and let it cool. Wipe the exterior with a soft, damp cloth. For the interior, drain the water and clean the reservoir with a non-abrasive sponge.

Does the bottle warmer make noises during operation?

A slight noise may be normal during heating, but if you hear loud or unusual noises, please turn off the device and check for any issues.

What is the product warranty?

The Bo Jungle BBottle bottle warmer typically comes with a 2-year warranty. Check the specific conditions in the user manual.

USER MANUAL BBottle Bo Jungle

B-Bottle Warmer Superfast Digital Car & Home

(Manual - Handleiding - Mode d'emploi - Gebrauchsanleitung- Instrucciones de uso - Instruções de utilização - Istruzioni per l'uso - Návod k použití)

White BoJungle baby bottle with digital display and bamboo design (no text or symbols on body)

Bo Jungle

English p3, Nederlands p6, Français p9, Deutsch p13 Español p16, Português p19, Italiano p22, Ceština p25

A B G C F D E

Parts:a – Holder for jar or bottleb – Plugc – Control paneld – Adapter ringe – Measuring cupf – Adaptor for carcigarette lighter socketg – Warmer base	Onderdelen:a – Mandje voor potje of zuigflesb – Stekkerc – Bedieningspaneel d – Aanpasringe – Maatbekerf – Adapter voorsigarettenansteker in de wageng – Reservoir	Pièces:a – Panier pour petit pot ou biberonb – Fichec – Panneau de commande d – Anneau d’adaptatione – Dosette graduéef – Adaptateur pour prise allume-cigare dans la voitureg - Réservoir	Teile:a - Halter für Glas oder Flascheb - Steckerc - Systemsteuerungd - Adapterringe - Messbecherf - Adapter fürZigarettenanzünderg - Heizplatte
Partes:a – Cestillo para biberones o potitosb - Enchufec - Panel de controld - Anillo de adaptacióne – Vaso dosificadorf - Adaptador para el encendedor de cigarrillos del cocheg - Recipiente	Peças:a - Suporte para biberões o boiõesb - Fichac - Painel de controled - Anel adaptadora - Copo de mediçãof - Adaptador para acendedor de cigarro do carrog - Recipiente	Pezzi:a - Supporto per biberon o vasettib - Spinac - Pannello di controllod - Anello adattatoree – Tazza di misuraf - Adattatore per l’accendisigari nella macchinag - Recipiente	Části:a - Držák na sklenici čiláhevb - Zástrčkac - Ovládací paneld - Kroužek adaptérue - Odměrkaf - Adaptér pro zapalovánív autěg - Ohřívací základna

Thank you for choosing the Bo Jungle bottle warmer, we are convinced that you will be fully satisfied with our product.

Please take a few minutes to carefully read through these instructions before using the product and keep them for future use.

TECHNICAL SPECIFICATIONS

Power supply	220 - 240 V – 50 Hz (home)	12 V DC (car)
Power consumption	500 W (home)	100 W (car)

IMPORTANT SAFETY INSTRUCTIONS – PLEASE READ THESE CAREFULLY:

• Before using the appliance for the first time, check if the electrical power supply voltage corresponds to the voltage that is mentioned at the bottom of the appliance.
• Always place the appliance out of the reach of children and ensure it is placed on a flat and dry surface.
• Make sure the power cord is also out of the reach of children. Do not let them to play with the appliance.
• Always ensure there is an appropriate amount of water in the appliance.
• Never immerse the device in water or any other liquid.
• Never add any other products or substances to the water in the appliance. This might damage it.
• Both the appliance itself and the bottles or jars that are in it may become very warm when it is switched on. Therefore, never move it while it is in operation or when it contains hot water, never touch the inside of the warmer base during or shortly after use. Whilst the appliance is in operation, touch only the control panel.
• Never heat baby food more than once and do not overheat it, as this encourages the development of germs and might also create hot spots, which reduce the quality of the milk.
• After use, let the machine cool down for at least 15 minutes before using it again. Unplug it after use.
• ALWAYS use the holder for jars and bottles. The ring of the bottles should be slightly loosened and the lids of jars of baby food should be removed before heating.

USE IN CAR:

• Never use this device in a moving vehicle. When using the device in your car, park your car safely on the side of the road and keep the engine running to avoid draining your car battery.
• The car adaptor plug is specially designed for this bottle warmer: never use it with other appliances.
• Regularly check the cigarette lighter socket in your car and clean it if necessary.
• If you have just used your car's cigarette lighter, allow it to cool down for five minutes in the open position before plugging in the adaptor.
• Place the bottle warmer on a safe, flat surface, so there is no risk of the device tipping over or risk of burn wounds.

IMPORTANT

Children or persons with physical, sensory or mental impairments should not be allowed to use this appliance unless they are being supervised by an adult who is responsible for their safety.

After heating, ALWAYS check the temperature of the food before giving it to your child. Mix the contents of the jar or shake the bottle. In the case of a bottle, pour a drop of milk onto the inside of your wrist to test the temperature. In the case of a jar, taste the food before giving it to your baby, as with a jar, the temperature can even get much higher.

OPERATING INSTRUCTIONS

1. Plug the appliance in
2. Pour the appropriate amount of water into the warmer base (G) using the measuring cup (E, see paragraph GUIDELINES)
3. Insert the bottle and jar holder (A) in the warmer base (G)
4. Insert the bottle in the holder (A); if you are using a standard/small bottle, place the adaptor ring (D) around the bottle to obtain a better heating result
5. When heating a jar of baby food, remove the lid and insert the jar in the holder (A)
6. Press the ON button to activate the appliance. The LCD starts twinkling, and shows "01: 30" as standard operating time. You can define an operating time between 1 and 12 minutes by pressing the buttons on the left (higher) and right (lower) side of the ON button. Press the ON button again to start the heating cycle after you have set the desired operating time. The LCD turns bright blue when the appliance starts working.

CAUTION! The steam that comes out of the appliance during the heating cycle is very hot. During operation, touch only the control panel (C).

1. During the heating cycle, the operating time on the LCD display counts down from the time you have set. When the heating cycle is finished, there will be three "beeping" sounds to remind you that the heating cycle has finished. The appliance will then switch off automatically.

Remarks:

1. During the heating cycle, you can press the ON button to pause the operation or to adjust the operating time. Press the ON button again to restart the heating cycle. The appliance will switch off automatically if you do not restart it within 5 minutes after it has been paused.
2. There will be rapid "beeping" sounds to warn you if the water in the warmer base runs out, and the thermostat will switch off. The heating cycle will continue after you refill the water in the warmer base. The appliance will switch off automatically if you have not refilled the water within 1 minute after the warning signal.
3. While the device is operating, you can stop the operation by pressing the ON button for 2 seconds. Press the ON button again to reactivate the appliance after you have made the necessary adjustments.

GUIDELINES

Please note that these are indicative values. The required heating time may vary depending on the ambient temperature, start temperature of the contents of the bottle or jar and temperature of the water in the warmer base.

Quantity of water in bottle	Start temperature	Type of bottle	Home ml	Home Time	Car ml	Car Time
60 ml	20°C	Large plastic bottle	9 ml	1:00	8 ml	4:00
90 ml	20°C	Large plastic bottle	9 ml	1:10	7 ml	4:00
120 ml	20°C	Large plastic bottle	11 ml	1:15	8 ml	4:00
180 ml	20°C	Large plastic bottle	9 ml	1:20	8 ml	4:00
210 ml	20°C	Large plastic bottle	10 ml	1:30	9 ml	4:00
240 ml	20°C	Large plastic bottle	8 ml	1:30	9 ml	4:00
330 ml	20°C	Large plastic bottle	15 ml	2:30	10 ml	6:00
60 ml	4°C	Large plastic bottle	9 ml	1:30	8 ml	4:30
90 ml	4°C	Large plastic bottle	9 ml	2:00	9 ml	5:30
120 ml	4°C	Large plastic bottle	10 ml	2:00	10 ml	7:00
180 ml	4°C	Large plastic bottle	12 ml	2:30	10 ml	7:30
210 ml	4°C	Large plastic bottle	13 ml	3:00	10 ml	8:00
240 ml	4°C	Large plastic bottle	17 ml	3:20	11 ml	9:00
330 ml	4°C	Large plastic bottle	18 ml	3:30	11 ml	10:00
130 gr	20°C	Food Jar	15 ml	2:00	15 ml	7:00
200 gr	20°C	Food Jar	25 ml	3:30	20 ml	9:00
250 gr	20°C	Food Jar	20 ml	4:00	20 ml	12:00

CLEANING

• Always ensure that the power cord is unplugged and that the appliance is cold before cleaning or filling it.
• Use a damp, clean cloth to clean the appliance.
• Never immerse the appliance in water or other liquids.
• Do not use any cleaning products to clean the device.
• The adaptor ring, the measuring cup and the holder are dishwasher-safe.

Descaling the tank:

• Depending on the quality of the water used, a limescale deposit can build up on the bottom of the warmer base over time. You should regularly descale your bottle warmer by pouring a mixture of 100 ml of hot water + 100 ml of white vinegar into the warmer base.
• Leave this to act for approximately 30 minutes before emptying the base and wipe off with a damp cloth.
• Do not use any detergents to clean the appliance.

COMMON ISSUES

The contents of the bottle do not heat up properly: this is often due to the fact that there is not enough water in the warmer base. Try adding some water. This will also influence the heating time.

The bottle warmer does not heat up:

• Check if the appliance has been properly plugged in and turned on
• Remove the layer of limescale that has formed in the warmer base if necessary

DEFECT OR DAMAGE

• In case you suspect that your appliance has a defect or malfunction, if it is not working properly or when the appliance itself or the power cord are damaged, call the after-sales service. Do not use it until it has been checked by a professional. Never dismantle it yourself.
• In accordance with European regulations, waste electronic and electrical equipment (WEEE) cannot be disposed of as regular household waste. It must be taken to a specialized collection point in your neighborhood.

Made In China – Bo Jungle - Vox Populi BVBA – Asterdreef 13 -9040 GENT – BELGIUM

www.bojungle.eu - [e-mail] - Tel: [phone] - Fax: [phone]