SB78000 - Blender AEG - Free user manual and instructions

USER MANUAL SB78000 AEG

94www.aeg.com Visit our website to: Get usage advice, brochures, trouble shooter, service information: www.aeg.com/webselfservice Register your product for better service: www.registeraeg.com Buy accessories and consumables for your appliance: www.aeg.com/shop CONTENTS ENGLISH 6 DEUTSCH 9

Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not nd on ordi- nary appliances. Please spend a few minutes reading to get the very best from it.

CUSTOMER CARE AND SERVICE

When contacting Service, ensure that you have the following data available: - Model Number - PNC number - Serial number The information can be found on the rating plate. يبرع5www.aeg.com6www.aeg.com ENGLISH Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and spare parts. They have been designed especially for your product. This product is designed with the environment in mind. All plastic parts are marked for recycling purposes. COMPONENTS A. Jug B. Spout C. Lid with ller hole D. Measuring cup E. Rubber seal F. Blade assembly, detachable G. Locking collar H. Motor housing

J. Non-slip feet Picture page 2-3 GETTING STARTED 1 Before using the blender for the rst time, wash all parts except for the motor housing. Assembling: Place the blade rubber seal on top of the blade assembly (A). Then place the blade assembly with the rubber seal into the col- lar (B). Carefully assemble the blades and collar into the jug. Tilt the collar slightly for easy access of knives into the jug. Once in place, turn the collar counter-clockwise to lock in place (C ). 2 Place the blender on a at surface and then place the jug on top of the motor housing. The jug can be placed is several dierent positions with handle on either sides, or in front. Put the ingredients in the jug. (Do not exceed the maximum level as indicated on the jug.) 3 Close the lid (A) and insert the measuring cup in the ller hole and (B) lock into position. (You can use the measur- ing cup to add ingredients while the blender is running. Close the ller hole immediately after, to avoid splashing.) Caution! When processing hot liquids, see paragraph 4. 4 Processing hot liquids: We recommend to allow hot liquids to cool down (max 90 °C) before lling the jug. Fill the jug only half full and start processing on low speed. The blender jug can become very warm – take care to protect your hands and to ventilate steam out through the ller hole. Always replace the lid before use. 5 Start the blender: Plug into mains. Press the On/O button (A) , the LED light will illuminate. Press the “Low” (B)

“High” (C) button to select your desired processing speed, or choose one of 3 special functions. Light will indicate the speed selected. To pause, press the selected speed button again. Auto-O: If the machine is not turned o manually, the Safety Auto-O function turns it o after

minutes. 6 Pulse Function: Press the “Pulse” button (A) when you need a short burst of power. Smoothie Function: Press the “Smooth” button (B) to get ice crushed and your smoothie blended to the desired consistency. Crush Ice Function: Press the “Crush” button (C) to crush ice. (For best results, work in small batches.)

7 Quick cleaning: Pour warm water into the jug, add a few drops of detergent. Mix water and detergent by pressing the “PULSE” button. Finally, rinse the jug under running water. 8 Thorough cleaning: Turn the blender o and unplug the power cord. Wipe the motor housing with a damp cloth. Warning! Never immerse the housing, plug, and cord in water or any other uid. 9 Remove the lid and jug. Turn the collar clockwise to unlock. Then carefully remove the collar and knives by pulling the collar downwards. Lift o the blade assembly and the rubber seal from the collar. Rinse the blade assembly in water and detergent. Caution! Handle carefully, the blades are very sharp! The lid, jug and measuring cup can be washed in the dish- washer. Enjoy your new AEG product!7www.aeg.com

SAFETY ADVICE Read the following instruction carefully before using the appliance for the rst time.

• This appliance shall not be used by children. Keep the appliance and its cord out of reach of children. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Children shall not play with the appliance.

• The appliance may only be connected to a power supply whose voltage and frequency comply with the specications on the rating plate!

• Never use or pick up the appliance if – the supply cord is damaged, – the housing is damaged.

• If the appliance or the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied person, in order to avoid hazard.

• Always place the appliance on a at, level surface.

• Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.

• Never touch the blades or inserts with your hand or any tools while the appliance is plugged in.

• The blades and inserts are very sharp! Danger of injury! Caution when assembling, disassembling after use or when cleaning! Ensure that the appliance is disconnected from the mains supply.

Do not immerse the appliance in water or any other liquid.

• Do not let the blender run for more than 2 minutes at a time using heavy loads. After running for 2 minutes with heavy loads, the blender should be left to cool for at least 10 minutes.

• Do not exceed the maximum lling volume as indicated on the appliances.

• Never process boiling liquids (max 90 °C).

• Do not use this appliance to stir paint. Danger, could result in an explosion!

• Never operate appliance without lid.

• Do not let the power cord touch hot surfaces or hang over edge of table or counter.

• Never use accessories or parts made by other manufactures not recommended or sold; may cause a risk of injury to persons.

• The appliance can not be used for blending or grinding hard and dry substance, except for ice cubes.

• Keep hands and utensils out of the blender during operation to reduce the risk of severe injury to persons or damage to the blender.

• Ensure that the blender is switched o before removing it from the stand.

• This appliance is intended for domestic use only. The manufacturer cannot accept any liability for possible damage caused by improper or incorrect use.

The blender does not switch on. Components are not xed properly. Check if all the components are properly locked into position. The On/O button is not pressed. Make sure the On/O button is illuminated. If not, press the On/O button to turn the blender on. The jug is overlled. Empty the jug so you do not exceed the maximum level. The plug is not properly connected to the power outlet. Check the connection of the plug to the outlet or try another outlet. Power outage. Wait until power outage is over. Functional problem. Contact authorized service. The appliance is overheated and the thermal protector was activated. Unplug the appliance from the socket and leave it to cool down for at least an hour before next use. RECIPES MAXIMUM PROCESSING TIME WITH HEAVY LOAD MAXIMUM CAPACITY 2 min 1650 ml