WildMetal - Sound system NGS - Free user manual and instructions

USER MANUAL WildMetal NGS

OVERVIEW Main volume control (to adjust music vol) MODE (switch to USB / SD / Bluetooth / FM / AUX-IN) LED on/off (turn on/off LED) MUTE (to mute the speaker) PREV (previous song) PLAY (play/pause music) REPEAT (repeat to play single / all tracks) NEXT (next song) Low battery indicator AUX IN (audio input) Treble (to adjust treble vol) Bass (to adjust bass vol) Echo (to adjust echo vol) Mic. Vol (to adjust mic vol) Mic input (to insert wired mic) Power switch (power on/off) Charging input jack (DC input) Charging indicate light (red when charging, green when fully charged) Display (LED display screen) USB / micro SD card input (to insert USB / micro SD card) Micro priority (prioritises the voice coming out of the microphone by decreasing the volume of the music. Karaoke function)

BLUETOOTH MODE A. Press the MODE button until the screen displays the word BLUE. In Bluetooth mode the device goes into searching / paring / reconnect mode for pair. B. Now, turn ON the Bluetooth function on your mobile phone. C. Search for “NGS WILDMETAL” and select it to pair (for first time pairing or pairing a new mobile device). D. The Bluetooth speaker will be reconnecting automatically if your mobile phone has been paired (depend on the mobile phone’s type and configuration, manual reconnection may require on some devices). AUX IN You can connect the device with the external multimedia audio sources through the port “AUX”. After connection, just set the mode to AUX by pressing the “Mode” button on the device. The device can play the audio files from multimedia sources like PC, mobile phone, MP3 and MP4, etc.

When power ON the product, if USB card inserted, it can play the MP3 format music from the USB. Press PREV/NEXT buttons to select the song you want. Press the play/pause button to pause / resume the music.

MICRO SD CARD PLAYING

When the device is turned on it can play music in MP3 format from a micro SD card. Press the PREV/NEXT buttons to select the song you want. Press the play/pause button to pause / resume the music. NOTE: In the USB / SD modes you can choose to repeat one or all songs by pressing the REP button.USER’S MANUAL

automatic channel search.

3. Once the automatic search is completed, you can switch

between the saved stations by pressing the PREV/NEXT buttons. CHARGING INSTRUCTIONS This speaker has a high capacity 12V/4.5A battery. Please use a 15V/3A power adapter for charging. The charging indicator light will turn red to indicate that it is charging. It takes 4-8 hours for the battery to reach full charge. Disconnect the adaptor as soon as battery is fully charged (green charge light). Battery run time: 7 hours. TECHNICAL SPECIFICATIONS Output power: 120W Battery: 12V/4.5A Bluetooth Working range: 10m Frequency response: 80Hz~18kHz USB port Aux input Micro input x2 FM Radio Micro SD card reader LED screen Battery level indicator LED lightsENGLISH

If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive)MANUEL DE L’UTILISATEUR