DBS827 - Plastic welding machine BESTRON - Free user manual and instructions

Frequently Asked Questions - DBS827 BESTRON

USER MANUAL DBS827 BESTRON

User's instructions, bag sealer

1

1

一

一

VEILIGHEIDSVOORSCHRIFTEN - Algemeen

CONDITIONS DE GARANTIE

SAFETY INSTRUCTIONS - General

• Please read these instructions carefully and retain them for future reference.
• Use this appliance solely in accordance with these instructions.
  This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Have any repairs carried out solely by a qualified electrician. Never try to repair the appliance yourself.

SAFETY INSTRUCTIONS - Electricity and heat

Explain parts of the appliance may get hot. Do not touch these parts to prevent burning yourself.

• Make sure that the mains voltage is the same as that indicated on the type plate on the appliance before use.
• Regularly check the appliance's power cord to make sure it is not damaged. Do not use the appliance if the power cord is damaged. Have a damaged power cord replaced by a qualified service department.
  Always plug the appliance into an earthed wall socket.
  Always remove the plug from the wall socket by pulling on the plug, not the power cord.
  Always remove the plug from the wall socket when the appliance is not in use.
• When using an extension lead always make sure that the entire cable is unwound from the reel.
• Use only approved extension leads.
• The appliance needs space to allow heat to escape, thereby avoiding the risk of fire. Make sure that the appliance has sufficient space around it, and does not come into contact with flammable materials. The appliance must not be covered.
• Never use the appliance in the vicinity of flammable materials.
• Make sure that the appliance, the power cord or the plug do not come into contact with heat sources, such as a hot hob or naked flame.
• Make sure that the appliance, the power cord and plug do not come into contact with water or other liquids.

SAFETY INSTRUCTIONS - Use

• Never use the appliance outdoors.
• Never use the appliance in humid rooms.
• Place the appliance on a flat, stable and heat-resistant surface where it annot fall.
• Make sure that your hands are dry when you touch the appliance, the power cord or the plug.
• Switch off the appliance and remove the plug from the wall socket in the event of a malfunction during use, and before cleaning the appliance or storing it after use.
• Never leave the appliance unattended when in use.
• Never move the appliance when it is switched on or is still hot. Switch off the appliance, and wait until it has cooled down before moving it.
• Make sure there is sufficient free space around the appliance (at least 10cm ), as well as above the appliance (at least 30cm ).
• Parts of the appliance will become hot during use. Therefore always hold the handle to open and close the lid.
• Do not put heavy objects on the lid to keep the appliance closed.
• Make sure that water does not come into contact with the hot grill plates during or shortly after use. This can cause a grill plate to buckle.
• Do not touch the appliance if it has fallen into water. Remove the plug from the plug socket immediately. Do not use the appliance anymore.
• Clean the appliance thoroughly after use (see "Cleaning and maintenance").
  This appliance may not be used through an external timer or by means of a remote control.

OPERATION - Seal bags

A roll of seal bags is included in your new bag sealer. This instruction manual describes the sealing steps for seals bags, which are already sealed on two sides. Please note that not all seals bags are suitable for using with a bag sealer.

OPERATION - Using the Bag Sealer

1. Plug into appropriate outlet.
2. Open the lid and pull a piece of foil (slightly lager than required) out of the equipment. Use no more than 29 centimetres foil at a time, otherwise you cannot seal the last seam.
3. Now close the lid and push down evenly with two hands on both sides. The green indicator light will illuminate. Hold the lid down until the light extinguishes. The bag is now securely sealed and separated from the roll of seals bags inside the appliance.
4. Now fill the bag through the open unwelded side, taking care that the seams area remains free, so that the welding process is not interfered with the substance being filled into the bag. When filling the bag with liquids, only fill half of the bag. Make sure the appliance does not absorb any liquids.
5. Smooth the open side of the bag, open the lid again and place the foil over the sealing wire into the appliance. Repeat the welding process as previously described. After the green indicator light has extinguished, that side of the bag will also be securely sealed and excess foil can be easily removed.

OPERATION - Air pump function

This device is fitted with an air pump to remove surplus air from the foil bag. After this you can easily seal the bag.

1. Place the open side of the seal bag in the sealer, so that the air pump is inside the seal bag.
2. Suction starts as soon as you lightly press the centre of the lid. Only the red lamp will light up.
3. As soon as sufficient air has been sucked out, use both hands to press both sides of the lid. Suction stops, the green control lamp lights up and sealing commences.
4. Check whether the bag is sealed properly. If not, repeat the sealing.
5. After use remove the plug from the wall socket.

Between each sealing application wait at least 1.5 minutes.

CLEANING & MAINTENANCE

1. Before cleaning your bag sealer, always make sure that the plug has been removed from the mains supply socket.
2. Wipe the outside housing of the bag sealer with a damp cloth. For safety reasons, the appliance should not be immersed into liquids.
3. Do not us harsh or abrasive cleaners.

TECHNICAL INFORMATION

Type: DBS827

Output: 150 W

Power supply: 230 V ~50 Hz

THE ENVIRONMENT

• Dispos of packaging material, such as plastic and boxes, in the appropriate waste containers. When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin; hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to the symbols on the product, the user's instructions or the packaging.
• The materials can be re-used as indicated. Your help in the re-use, recycling or other means of making use of old electrical equipment will make an important contribution to the protection of the environment.
• Contact your municipality for the address of the appropriate collection point in your neighbourhood.

GUARANTEE TERMS

The importer guarantees the appliance against defects caused by manufacturing and/or material faults for 60 months from the date of purchase, subject to the following conditions.

1. No charges will be made for labour costs or materials during the warranty period. Any repairs carried out during the warranty period do not extend the warranty period.
2. The importer automatically becomes the owner of any faulty parts that he replaces or a faulty appliance (in the event of replacement of the appliance).
3. All claims submitted under warranty must be accompanied by the original bill of sale.
4. Claims under warranty must be submitted to the dealer where the appliance was purchased or to the importer.
5. The warranty is issued solely to the first purchaser and cannot be transferred.
6. The warranty does not cover damage caused by:

a. Accidents, incorrect use, wear and/or neglect.
b. Faulty installation and/or use in a manner contravening the prevailing legal, technical or safety regulations.

c. Connection to a mains voltage other than the voltage specified on the type plate.
d. Unauthorized modifications.
e. Repairs carried out by third parties.
f. Careless transport, i.e. without suitable packaging materials or protection.

1. No claims may be made under this warranty for:

a. Losses incurred during transport.
b. The removal or changing of the appliance's serial number.

1. The guarantee does not cover power cords, lamps or glass parts.
2. No claims can be submitted under this warranty for damage other than the repair or replacement of faulty parts. The importer can never be held responsible for any consequential loss or damage or any other consequences, resulting either directly or indirectly from the appliance supplied by the importer.
3. In case of claims under guarantee you can contact your dealer where the appliance is purchased. Bestron offers you also the possibility to send the appliance directly to our Service Department. Do not send your appliance without consulting us. The package may be refused and any any costs will be for your account. Please contact the Service Department and they will tell you how to pack and send the appliance.
4. This appliance is not suitable for professional use.

SERVICE

If a fault should occur please contact the BESTRON service department:

THE NETHERLANDS:

BESTRON NEDERLAND BV

Bestron Service

Moeskampweg 20

5222 AW's-Hertogenbosch

Tel: [phone]

Fax: +31 (0) 73 - 621 23 96

Email: [e-mail]

Internet: www.bestron.com

CE DECLARATION OF CONFORMITY

This product conforms to the essential requirements of the following EU safety directives:

EMC Directive 2004/108/EC
Low Voltage Directive 2006/95/EC

R. Neyman

Quality control

1

1

一

一

DESTRON

DBS827 v 220114-07