Freedom Par T6 - Lamp Chauvet - Free user manual and instructions

USER MANUAL Freedom Par T6 Chauvet

Freedom Par T6 QRG Rev. 1

QUICK REFERENCE GUIDE

Safety Notes These Safety Notes include important information about installation, use, and maintenance of Freedom Par T6. FCC Compliance This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. What is Included ■ ALWAYS: ♦ Connect to a grounded circuit. ♦ Connect to operating voltages as specified on the product's spec sticker. ♦ Disconnect from its power source during periods of inactivity. ♦ Use a safety cable when suspending overhead. ♦ Heed all restrictions and warnings on the spec sticker. ♦ Mount in a location with at least 20 in (50 cm) of ventilation. ■ In the event of a serious operating problem, stop using immediately. ■ DO NOT: ♦ Open this product or attempt any repairs. It contains no user-serviceable parts. ♦ Look at the light source when the product is on. ♦ Use if the power cord is crimped or damaged. ♦ Disconnect by pulling on the power cord. ♦ Allow flammable materials close to the product when it is operating. ♦ Touch the housing when it is on. ♦ Block any ventilation holes/slots in the housing. ♦ Connect to a dimmer or rheostat. ♦ Carry the product by its power cord. ♦ Operate in temperatures higher than 104°F (40°C). ♦ Expose to environments that exceed the Ingress Protection (IP) rating. ♦ Expose to rain or moisture. ♦ Use outdoors. ♦ Freedom Par T6 ♦ External power supply ♦ Magnetic diffuser ♦ Quick Reference Guide2

Freedom Par T6 QRG Rev. 1 Battery Charge Notes Rechargeable lithium-ion batteries are potentially hazardous and can present a serious FIRE HAZARD, SERIOUS INJURY and/or PROPERTY DAMAGE if damaged, defective, or improperly used. Control Panel Description ■ ALWAYS: ♦ Charge using a manufacturer-provided charger while the product is powered off. ♦ Charge the battery in temperatures between 32°-95°F (0°-35°C). ♦ Allow a depleted battery to charge for a few minutes before turning on the product. If the battery is completely discharged, the device cannot be turned on immediately when the charger is connected. ♦ Keep at least 3 ft (1 m) distance to any heat source and away from flammable materials. ♦ Keep the lid of any charging case open while charging. ♦ Keep batteries away from children. ♦ Store batteries between 40-60% charge. ♦ Follow local regulations when disposing of batteries. ♦ Replace with an authentic Chauvet battery. ■ DO NOT: ♦ Continue charging if the battery becomes hot, smokes, swells, or gives off an odor during charging. ♦ Leave the product unattended while charging. ♦ Deplete the battery below 10%. ♦ Charge the battery in a closed container. ♦ Charge for more than 24 hours. Button Function <MENU> Exits from the current menu or function <UP> Navigates upwards through the menu list and increases the numeric value when in a function <DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function <ENTER> Enables the currently displayed menu or sets the currently selected value into the selected functionES

Freedom Par T6 GRR Rev. 1

Freedom Par T6 GRR Rev. 1

Freedom Par T6 QRG Rev. 1Multi-Language