C1102AME - Curling iron BABYLISS - Free user manual and instructions

USER MANUAL C1102AME BABYLISS

CARACTERISTIQUES DU PRODUIT

ENGLISH With the BaByliss Curl Secret® IONIC styler, easily create beautiful curls with long-lasting eect. No tedious handling, no complicated move, the Curl Secret® IONIC makes gorgeous curls thanks to its clever automatic system. Read the safety instructions rst. PRODUCT FEATURES

• 3 timer settings (8, 10 and 12 seconds) with audio beep indicator for various curl eects (3)

• Ionic technology : shine and antistatic

• Operated indication light (LED) (4)

• When using the unit for the rst time, you might notice a little smoke and a distinct odour: this is common and will disappear in the following use.

• When using the unit, you might see some steam. Do not be concerned, this could be because of evaporation of the sebum, some residual hair products (leave-in hair care, hairspray, etc.) or excess water that is evaporating from your hair.

• It is possible to use a heat protection spray for optimal protection of the hair.

• The ionic generator inside the unit releases frizz-controlling ions on to the hair to give a smooth, shiny nish when styling. Note: There will be a slight buzzing sound from the styler which is from the ionic generator releasing the ions. This is normal.

• Plug in the appliance, switch on and select the desired temperature using the 0-I-II switch. See table below : Temperature Hair type (I) : 210°C Fine, lightened and/or damaged hair (II) : 230°C Normal, thick, wavy, curly and/or coloured hair 16_C1102AME_IB.indd 6 18/08/16 15:147

• The indicator light comes on and will start to ash.

• The indicator light will stop ashing when the appliance has heated up to the selected temperature. The appliance is now ready to use; the indicator light will stay on.

• Select the time setting depending on the desired curl eect. For loose curls, select the minimal time setting. For more dened curls, select the maximal time setting. Please refer to the table below : Time Audio beep indicator Curl eect 8 8 seconds 3 beeps Loose waves 10 10 seconds 4 beeps Soft curls 12 12 seconds 5 beeps Dened curls Precautions for use

• Ensure that hair is dry.

• Clip the upper layers to the top of your head and start working on the layers underneath.

• Separate a section of hair no wider than 3 cm. Ensure the section is thoroughly combed through.

• Bring the appliance close to the hair and position it in the right direction: the cavity formed by the cylinder downwards (FIG.1 and 2) and facing the head. (FIG. 3 and 4).

• With your free hand, take hold of the tip of the section of hair and place it on the opening, in the funnel situated between the two handles (FIG.5). Note: To prevent the appliance from blocking, ensure that you have no hair lying across the edges. Also ensure that you are not pulling your hair before activating the handles (FIG. 6 and 7). If these precautions are not respected, you risk catching your hair in the appliance.

• Once the section of hair is in place, close the handles to allow the hair to automatically enter into the appliance.

• Keep the handles closed until the beeping stops (after 3, 4 or 5 beeps depending on the selected time setting, see the table above) (FIG.8).

• Gently release the hair from the appliance by opening the handles (FIG.9). Don’t pull on the appliance to free the hair. If you do this you will ruin the curl eect.

• Allow your hair to cool before handling or combing it. 16_C1102AME_IB.indd 7 18/08/16 15:148

• Repeat all over the head until you have the number of curls you would like.

• After use, switch o and unplug the appliance. Allow to cool before storing away. Protection system The appliance is tted with a protection system. If hair becomes tangled, the appliance emits an audible signal, it blocks and stops heating. If this occurs, release the handles, ensuring that the appliance and section of hair are correctly positioned, then simply re-close the handles to deactivate the security system and re-start the appliance. Sleep mode If the appliance is not in use for more than 20 minutes, the temperature will automatically reduce to 150°C. If you wish to continue using the appliance after this time, simply close then release the handles and the appliance will return to the temperature setting previously selected. Automatic shut o If the appliance is left switched on for more than 60 minutes at a time, it will automatically shut o. If you want to continue using the appliance once this time has passed, slide the switch to position “0” and then to the desired position to start the appliance.

CLEANING AND MAINTENANCE

In order to prevent build-up of residue from hair products which would prevent the appliance from working properly, it is important to use the cleaning tool provided to regularly clean the appliance.

• Ensure the appliance is switched o, unplugged and cool.

• Lightly dampen the cleaning tool with warm water and mild soap.

• Insert the tool fully into the cavity formed by the appliance and the cylinder (FIG. 10).

• Rotate the tool several times around the cylinder to remove any build- up of hair products (FIG. 11).

• Remove the cleaning tool from the cavity.

• Ensure the appliance is completely dry before reusing.