H 24MLE - Drill Würth - Free user manual and instructions

Frequently Asked Questions - H 24MLE Würth

USER MANUAL H 24MLE Würth

BOHRHAMMER ROTARY HAMMER

H 22-SLE
H 24-MLE
H 24-MLS

Read all safety warnings and all instructions. Failure to follow

the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Working safely with this machine is possible only when the operating and safety information are read completely and the instructions contained therein are strictly followed.

Hammer SafetyWarnings

Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.
Hold the power tool by insulated gripping surfaces only, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.
Use suitable detectors to determine if utility lines are hidden in the work area or call the local utility company for assistance. Contact with electric lines can lead to fire and electric shock. Damaging a gas line can lead to explosion. Penetrating a water line causes property damage or may cause an electric shock.

When working with the machine, always hold it firmly with both hands and provide for a secure stance. The power tool is guided more secure with both hands.
- Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more secure than by hand.
- Keep your workplace clean. Blends of materials are particularly dangerous. Dust from light alloys can burn or explode.
Always wait until the machine has come to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the power tool.
Never use the machine with a damaged cable. Do not touch the damaged cable and pull the mains plug when the cable is damaged while working. Damaged cables increase the risk of an electric shock.
Use only original Würth accessories.

Tool Specifications

Rotary Hammer H 22-SLE H 24-MLE H 24-MLS

Article number 5708 200 X 5708 201 X 5708 202 X

Rated power input 700 W 750 W 750 W

Impact frequency at rated speed 0-4500 min

Impact energy per stroke according

to EPTA-Procedure 05/2009 2.2 J 2.4 J 2.4 J

Rated speed 0-1250 min

Tool holder SDS-plus

Spindle collar diameter 43 mm

Drilling diameter, max.

Concrete
- Brickwork (with core bit)
- Steel
- Wood

Weight

Class of protection

-1 0-4500 min -1 0-4500 min

-1 0-1250 min -1 0-1250 min

SDS-plus

43 mm

22mm 24mm 24mm

68 mm 68 mm

13mm 13mm

30 mm 30 mm

2.4 kg 2.5 kg 2.6 kg

II II

Intended Use

The machine is intended for hammer drilling in concrete, brick and stone. It is also suitable for drilling without impact in wood, metal, ceramic and plastic.

For damage caused by usage other than intended, the user is responsible.

Symbols

	Read all safety warnings and all instructions
	Warning
	Before any work on the machine itself, pull the mains plug.

Initial Operation

Setting the operating mode

The operating mode of the power tool is selected with the mode selector switch 1.

To change the operating mode, push the release button and turn the mode selector switch 1 to the requested position until it can be heard to latch.

Note: Change the operating mode only when the machine is switched off! Otherwise, the machine can be damaged.

T	Position for hammer drill- ing in concrete or stone
	Position for drilling without impact in wood, metal, ceramic and plastic
(H 24-MLE H 24-MLS)	Position for changing the posi- tion of the chisel The mode selector switch 1 does not latch in this position.
(H 24-MLE H 24-MLS)	Position for chiselling

Dust Extraction

Dusts from materials such as lead-containing coatings, some wood types, minerals and metal can be harmful to one's health. Touching or breathing in the dusts can cause allergic reactions and/or lead to respiratory infections of the user or bystanders.

Certain dusts, such as oak or beech dust, are considered as carcinogenic, especially in connection with wood-treatment additives (chromate, wood preservative). Materials containing asbestos may only be worked on by specialists.

• Provide for good ventilation of the working place.
• It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the materials being worked on.

Maintenance and Cleaning

Before any work on the machine itself, pull the mains plug.
For safe and proper working, always keep the machine and ventilation slots clean.

If the machine should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by a Würth master-Service.

In all correspondence and spare parts orders, please always include the article number given on the type plate of the machine.

The current spare parts list for this power tool can be viewed in the Internet under

"http://www.wuerth.com/partsmanager" or be requested from your next Würth branch office.

Guarantee

For this Würth power tool, we provide a guarantee in accordance with the legal/country-specific regulations from the date of purchase (verified by invoice or delivery document). Damage that has occurred will be corrected by replacement or repair.

Damage caused by normal wear, overloading or improper handling is excluded from the guarantee.

Claims can only be accepted if the power tool is sent undisassembled to a Würth branch office, your Würth sales representative or a customer service agent for Würth compressed-air and power tools.

Disposal

The machine, accessories and packaging should be sorted for environmental-friendly recycling.

Do not dispose of power tools into household waste!

Only for EC countries:

According to the European Guideline 2002/96/EC for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be col

lected separately and disposed of in an environmentally correct manner.

Noise/Vibration Information

Measured sound values determined according to EN 60745.

Typically the A-weighted noise levels of the product are: Sound pressure level 89 dB(A); Sound power level 100 dB(A). Uncertainty K = 3 dB.

Wear hearing protection!

Overall vibrational values (vector sum of three directions) determined according to EN 60745: Hammer drilling in concrete: Vibrational emission value a_h = 13.3 m/s^2 , uncertainty K = 1.5 m/s^2 .

Chiselling: Vibrational emission value a_h = 11.6 m/s^2 , uncertainty K = 1.5 m/s^2 .

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.

Declaration of Conformity (C E

We declare under our sole responsibility that this product is in conformity with the following standards: EN 60745, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3 in accordance with the Directives 2011/65/EU, 2006/42/EC, 2004/108/EC.

Technical file at:
A. Würth GmbH & Co. KG, Reinhold-Würth-Straße 12 - 17, 74653 Künzelsau

T.Klenk A.Krautle General Manager General Manager

Kunzelsau: 01.08.2012

Subject to change without notice.

IT

cOs das directivas 2011/65/UE, 2006/42/CE, 2004/108/CE.

Processtécnico em:

2006/42/EY, 2004/108/EY.

Tnpoupe to 6ikaiomega aalayawv.

TR

Güvenliginiz icin

UYARI

A. Krautle
General Manager

Kunzelsau: 01.08.2012

Subrezerva modificarilor.

SI

Za vašo varnost

A OPOZORILO Preberite vsa opozorila in napotila. Napake zaradi neupos

A. Krautle
General Manager

Kunzelsau: 01.08.2012

Galimi pakeitimai.

LV

Jusu drosibai

Uzmanigi izlasiet visus droši-bas noteikumus. Šeit sniegto

drosibas noteikumu un noradijumu neieverosana var izraisit aizdegsanos un but par celoni elektriskajam triecienam vai nopietnam savainojumam.

Pec izlasihanas uzglabajet sos noteikumus turpmakai izmantoisanai.

Turpmakaja izklasta lietotais apzimejums „elektroinstruments" attiecas gan uz tikla elektroinstrumentiem (ar elektrokabeli), gan ari uz akumulatora elektroinstrumentiem (bez elektrokabela).

NcnoB3OBaHHoe B HactoHx HHCTpyKunx N yKa-3aHnX NOHtne «3NeKTponHCTpymeHTPacnpocTpaHareTcHa 3NeKTponHCTpymeHT C nHTaHnEM OT cETn (C cTeBBIM shypom) H Ha aKKyMylTophIn 3NeKTponHCTpymeHT (6e3 cTeBOrO shhya).

6e3onachra pa6ota c 3neKtpoHHCTpymeHtOM BO3MOXHa TOnbKO B TOM cnyuae,ecnBbl NOJIHOCTbIO npOHTaII INHCTpyKcIIO NO 3KcNlyatauHN yKa3AHNA NO TEXHKe 6e3onacHOCTm n CTporo cNeedyete MM.

Yka3aHnnoTexHnke 6e3oNaCHOCTn dIy MoJOTKOB

HaedeBaIte cpeCTBa 3aunItb opraHOB cnyx. yM MoKet NOBpeNTb Cnyx.
NcnoIb3yIte npnaIarauOuHnecK 3JIeKTPoHnCTpyMeHTy DOIOJIHnTeJIbHbIe pyKoAaTK. IOTepa KOHTpOJa MOKeT HMeTb CBOIM CNEICTBHeM TEneChIbe NOBpeXdEHnJ.
DepxKHTe 3JeKTPoHHCTpymeHT TOnbKO 3a H3OJInpOBaHHbIe NOBepXHOCTn PYKOrTOK, ecH Bbl BbINOJHReTe pa6Otbl, npN KOTOpbIX pa6OuN IHCTpymeHT MoXeT nonactb Ha cKpbITyIO 3JeKTPoPBOdKy Hn HA CO6CTBeHHbI CEteBOH shyp.

KoHTaKT c npOboDKoN oN HAnpJxKeHHeM MoXeT 3apAHTb MetaJIInueCKNe Yactn 3JeKTPoHHCTpyMeHtA N pINBecTH K NopaxKeHIO 3JeKTPOTOKOM.

NcnoNb3yIte COOTBETCTBYIOUne MetaONOCATEEN In HAXOXKeHNA CnpTaHHbIX B CTHe Tpy6 Hn npOBOKn Hn O6paauTecb 3a CnpABKO B MeCTHOe KOMMyHaNbHOe npEApnTne. KOHTAKT C 3JIeKTPoPBOOKOJ MOXET PnIBEcTN K NOxApY N nopaxeHNO 3JIeKTPOTOKOM. NOBpeXJeHne ra3OpBOOa MOXET PnIBEcTN K B3pbIBy. NOBpeXJeHne BOOnPOBODa BeDET K HAnCeHIO MaTePnaIbHOrO yUe6a Hn MoXeT BbI3BaTb NopaxeHne 3JIeKTPOTOKOM.

Bcerda depxnte 3neKtpOHnHcTpymENT BO Bpempa60tbi 06enm pykam,3aHb NpeBapntbHO yctounboe nooxkeHne. BympykAmn Bpa6oTaTe 6onee HndexHo c 3neKtpOHnHcTpymENTom.
3akpennate 3arotOBky.3arotOBka, yCTaHOBHeHHa B 3axmHoe npncnoc6neHne HnB TnCKn, ydepxnBaetc6Oone HaJeXHo, YeM B Baew pyke.
DepxntBaapepa6ooye MeCTOB uHCTOTE. Cmecn MaTePnaIOB Oco6eHHO ONaCHbl. Nblb CBETHbIX METAnIOB MOXET BOCPiAMEHHTbcr HIN B3OPBATbcr.
BbIXdnte noJHOJ OCTaHOBKn 3JeKtpoMHCTpymeHTa N TOJbKO NOcNe 3TOrO BblnyckaIte erO n3 pyK. Pa6ouH INCTpymeHT MoKET 3aecTb, H 3TO MoKET npINBecTH K IOTepe KOHTPOJIra HAD 3JeKTPoIHCTpymeHTOM.
He pa6oatae c 3neKtpomHCTpymeHOM c NOBpeXdeHHbIM shyPOM nHTaHn. He KacaItecb NOBpeXdeHHoro shypa, OTcoEduHnte BnIKy OT wTeNCelbHOJ PO3eTK, ecn shyp 6bl NOBpeXdH BO BpeMa pa6oTbI. NOBpeXdeHHbIM shypr NOBbiwaet pNCK npaxeHn 3neKtpOTOKOM.
PpHMeHnTe TOnbKO OPHnHaIbHbIe npHAdJeXHoCTn FnpMbI Wurth.

TexHnueckne daHHbIe

Nepopatop H 22-SLE H 24-MLE H 24-MLS

Homep aptnkyna

Hom. notpe6nemar MOUHOCTb

Yncno yapob npn HOMHaHbHom ycne o6opotOB

Cnla OINHouHOrO yIapa B COOTBETCTBHN C

EPTA-Procedure 05/2009

HOMnHaJIbHoe YncNo 6OpOToB

Pntpoh SDS-plus SDS-plus

HnametpweiKwnHneJra

Hnametp Cbepna, MaKc.

-BeToH
-Kamennha knaika (Konbueba CBepnHbHa φpe3a)
- CtaIb
-peBecnHa

Bec

Knacc 3auntbi

5708 200 X	5708 201 X	5708 202 X
700 Bt	750 Bt	750 Bt
0-4500 MmH.	0-4500 MmH.	0-4500 MmH.
2,2Дж	2,4Дж	2,4Дж
0-1250 MmH.	0-1250 MmH.	0-1250 MmH.
43 MM	43 MM	43 MM
22 MM	24 MM	24 MM
68 MM	68 MM	68 MM
13 MM	13 MM	13 MM
30 MM	30 MM	30 MM
2,4Κr	2,5Κr	2,6Κr
II	II	II

Ecnn 3neKtpoHCTpyMeHT, HecMOTpHa TtateBhbIe MeToDbI N3rTOBHeHn H NCbITAHN, BbIeT N3 CTPO, To pemOH TcneJyET NOpuHTb MaCTepCKoWurth master-Service.

Ioxanyhcta, npn Bcex 3anpocax n 3aka3ax 3anacte o6a3ateIbHO yKa3bIbAite TOBapHbI Homep no 3abOdCKoT a6nueKe 3neKtpOnHCTpyMeHTa.

AkyaHbHn nepeueHb 3anachbix qacteI nHa HactoIeO 3neKtpOHNCTpyMeHa Bbl MoXe HauTHB IVHTepHeTe no aDpecy

He BbI6paCbIBaIte 3NEKtpOnHCTpyMeHTbIB 6bITOBO Mycop!

ToIbko IaI cTpaH-ueHOB EC:

B COOTBETCTBHN C EBPONECKO INpeKTHBOI 2002/96/EC o6 Otpa6oTaHHbIX 3JIeKTPnuecknx IN 3JIeKTPoHHbIX pIn6opax H ee INpeTBOpEHnEM B HAUNOHANbHOE

3aKoHOdaTeNbCTBO OTCnyxNbUne 3JeKtpnueckne H 3JeKTPoHbIe IHCTpyMeHTbI HyXHo CO6npaTb OTdEJIbHO N CdaBaTb Ha 3KOIoTnueCKn YnCTyIO peKynepaunio.

YKa3aHHbIn B HAcToaunx INHCTpyKunx yPoBeHb Bn6paunu n3MepeH no MeToAnke n3MepeHn, npOncaHHoB CtAndapeEN 60745, mOKeT 6bItb NcNoJIb3OBAH dJa CpABHeHn 3NeKtpOHnHCTpyMeHTOB. OH npirodeH TaKxe dJa npedBaPntelbHO ueHKn Bn6paunOHn Harpy3KN.

YpOBeHb Bn6paun yKa3AH nIa OCHOBhIX BnIOB pa6Oblc 3NeKtpOHnHCTpyMeHTOM. OHaKO ecnI 3NeKtpOHnHCTpyMeHT 6yDet HcNoJIb3OBaH dIa BblONHeHn DpyHX pa6OT c npImeHHeHem pa6Ouynx IHCTpyMeHTOB, He npElyCMOTpeHHbIX N3rOToBnTeJIeM, IIN TeXHHueCKoe 0cCnyXuBAHne He 6yDet OTBeUATb PpeJINCAHN, To YpOBeHb Bn6paun MoKet 6bITb INbIM. 3TO MOKET 3HaUnTEJbHO NOBICHTb Bn6paUNOHHyIO HARpy3Ky B TeueHne BCEI pOnOJNXtJIbHOCTn pa6Obl.

ДяTOUHOn OueHKN Bn6paunHOH Harpy3Kn B TeueHne ONpeJeHHoro BpeMeHHoro INHTepBaIa HYxHO yuHTbIBATb TAKKe I BpeM, KOrJa IHCTpyMeHT BblKIOueH nII, XOTa N BKIOueH, HO He HaxOJNTcB Pa6ote. 3To MoKet 3HaunTeNbHO COKpaTHTb Harpy3Ky OT Bn6paunn B paCteTe Ha noHoe pa6ooye BpeM. PpeDycmOTpnte DOnONHtEnbHbIe Mepbl 6e3onac-HocTIN JnAunTBIO nePapTopa OT Bo3deNCTBn Bn6paunn, HapnMep:TexHnueckoe obCnyXHBaHne 3JIeKTPoINHCTpyMeHTa n pa6oYnx INHCTpyMeHTOB, Mepbl NO NOdEprKaHnHO pyk B TeIe, opraHn3aunr TEXHOJoruecknx npoueccoB.

3aBHeHne o COOTBetCTBUN (E

Mbl 3aBnem NOI Hauy eINHOHnHyO OTBeTCTBHeHHocTb, YTO 3TOT NPOdyKT COOTBetCTByET TAKHM Hopmam H HopMaTHBAM: EN 60745, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3, B COOTBeTCTBnC nIOJxKeHNMAH DInpeKTHB 2011/65/EC, 2006/42/EC, 2004/108/EC.

TexHnuecka JOKymeHTauNia: A.WurthGmbH&Co.KG, Reinhold-Wurth-StraBe 12-17, 74653 Kunzelsau

T.Klenk

A. Krautle

General Manager

General Manager

Kunzelsau: 01.08.2012

Bo3MOXHbI n3MeHeHnA.