M 95 - Coffee grinder Petra Electric - Free user manual and instructions

USER MANUAL M 95 Petra Electric

CEBefore using Read the instructions carefully. They contain important information for the use, safety and maintenance of the appliance. Keep them in a safe place and transfer them to a possible succeeding user. Only use the appliance for the purpose mentioned in these instructions. When using pay particular attention to the following safety advice. Safety advice Only connect the appliance to alternating current -with a rated voltage according to the rating plate - to a correctly installed earthed socket. Cable and plugs must be dry. The appliance is designed for short time opera- tion. In case larger amounts are ground, switch off the appliance after 1 minute of operation in order to allow the appliance to cool down. Only grind coffee with this appliance. Maximum capacity 50 g. Do not pull the cord over sharp edges or jam it, and protect it from heat and oil. Do not put the appliance on hot surfaces, such as hot plates or near unshielded gas flames. Do not disconnect the appliance by pulling at the cord or grip the cord with wet hands.

Only remove the lid after the fly cutter has stopped.

This appliance is not meant to be used by persons (includ- ing children) with reduced physical, sensorial or mental capacities or in absence of the necessary experience and/or knowledge - unless they are supervised by a person responsible for their safety and from whom they get instructions on how to use the appliance.

Keep out of reach from children. If any of the following happens, do not use the appliance and unplug it immediately; - if the appliance or cord is damaged, or - if there is defect after a fall or similar. In these cases have the appliance repaired. Disconnect the appliance in these situations:

6- any malfunction during operation

- prior to cleaning and maintenance or - after use. Do not immerse the appliance in water. In the case of misuse, wrong handling or incorrect repair no liability will be taken for possible damages. Claims under guarantee are also excluded in such cases. The appliance is not designed for commercial purposes. In case the cord of this appliance is damaged, it has to be replaced by an authorised service agent of the manufacturer or a person having similar qualifications. Substantial dangers for the user can appear from inappropriate repairs. Putting into operation Prior to first use wipe the inside of the lid and the container with a damp cloth and rub dry afterwards. Connect the appliance to a socket. Then filll the bowl and put on the lid. The maximum capacity of 50 g is sufficient for about 8 cups of coffee. For security reasons the fly cutter mill can be operated with fixed lid only. For grinding, press down the button on the lid 7until the desired degree of fineness is obtained. This can be observed through the transparent cover during operation. After the fly cutter has stopped the coffee powder can be emptied. Prior to this, disconnect the appliance. Caution: danger of injury! In any case wait until the fly cutter has stopped operation! Cleaning and maintanance After use unplug the appliance. Never immerse the appliance in water, clean the outside with a damp cloth only. Do not use caustic or scouring cleaning agents. Remaining powder can be removed by a brush. For UK use only This product ist supplied with a 13 A plug conforming to BS 1363 fitted to the mains lead. If the plug is unsuitable for your socket outlets or needs to be replaced, please note the following. If the plug isa nonrewirable one, cut it from the mains lead and immediately dispose of it. Never insert it into a socket outlet as there is a very great risk of an electric shock. The replacement of the plug at the mains lead has to be done according to the following instructions: Important: The wires in this mains lead are coloured in accordance with the following code: blue: Neutral brown: Live As the colours of the wires in the mains lead of this appliance may not correspond with thecoloured markings identifying the terminals in your plug, proceed as follows: - the wire wich is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. - the wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. 8Do not connect any wire to the terminal which is marked with the letter E or by the earth symbol , or coloured green or green and yellow. If a 13 A (BS 1363) plug is used it must be fitted with a 3 A fuse conforming to BS 1362 and be ASTA aproved. If any other type of lug is used, the appliance must be prottected by a 5 A fuse either in the plug or adapter or at the distribution boured. If in doubt - consult a qualified electrician. Never use the plug without closing the fuse cover. The appliance complies with the European directives 2006/95/EC and 89/336/EEC. At the end of its lifetime this product must not be disposed of through the normal domestic waste, but it should be handed to an assembly point for the recycling of electrical and electronical appliances. You can inquire about details at the local admini-stration. Subject to technical changes.