TKG IKP 800 - Pan KALORIK - Free user manual and instructions

USER MANUAL TKG IKP 800 KALORIK

Induction Cooking Plate

1. Dial for power stages
2. LED indicator
3. Cooking zone
4. Flex

FR

Please read these instructions carefully before using the appliance, and always follow the safety and operating instructions.

Important: People (including children) who are not able to use the appliance in a safe way, due to their physical, sensorial or mental capacity or their lack of experience or knowledge, must never use the appliance except if they are supervised by a person responsible for their safety or if they previously received instructions concerning the safe use of the appliance. Close supervision is necessary to prevent children from using the appliance as a toy.

☐ Check that your mains voltage corresponds to that stated on the appliance.
☐ Never leave the appliance unsupervised when in use.
From time to time check the cord for damages. Never use the appliance if cord or appliance shows any signs of damage but have it checked and repaired by a competent qualified service (1). Should the cord be damaged, it must be replaced by a competent qualified service (2).
☐ Only use the appliance for domestic purposes and in the way indicated in these instructions.
☐ The appliances are not intended to be operated by means of an external timer or separate remote-control system.
☐ Do not put knife, fork aluminum foil, spoons, lids, iron and empty pan or other metal material on the ceramic plate, since those maybe heated.
☐ To avoid electric shocks, never immerse the appliance in water or any other liquid for any reason whatsoever. Never place it into the dishwasher.
☐ Never use the appliance near hot surfaces or near objects that are sensitive to magnetism.
Before cleaning, always unplug the appliance from the power supply.
☐ Never use the appliance outside and always place it in a dry environment.
☐ Never use accessories which are not recommended by the producer. They could constitute a danger to the user and risk to damage the appliance.
☐ Never move the appliance by pulling the cord. Make sure the cord cannot get caught in any way. Do not wind the cord around the appliance and do not bend it.
☐ Stand the appliance on a table or flat surface with ample distance to the outer edges. Do not block the ventilation opening. Make sure that the appliance has sufficient free space.
☐ Do not move the appliance when pots or pans are standing on it.
☐ Do not put any empty pans, metal objects, inflammable objects or objects with low heat resistance on the plate.
☐ Make sure the appliance has cooled down before cleaning and storing it.
☐ Make sure the cord never comes into contact with the hot parts of the appliance.
☐ Do not touch the hotplate, as it may be hot after a long use.
☐ Make sure the appliance never comes into contact with inflammable materials, such as curtains, cloth, etc. when it is in use, as a fire might occur.
□ Always unplug the appliance when it is not in use, especially since it is not equipped with an on/off switch.
☐ Be extremely careful, as oil or fat preparations might catch fire when overheated.
☐ When using the appliance under an extractor hood, make sure to observe the minimal distance advised by the producer. It is even wiser to double this distance.
☐ Only use the appliance for food that is supposed to be cooked.
☐ Immediately unplug the appliance if a crack or defect appears and make sure it is controlled by a qualified competent electrician ^(1) .

☐ Your appliance must never be switched on through an external timer or any kind of separate remote control system.

^1) Competent qualified electrician: after-sales department of the producer or importer or any person who is qualified, approved and competent to perform this kind of repairs in order to avoid all danger. In case of need you should return the appliance to this electrician.

The induction cooking plate will function only when a cooking utensil that is suitable for induction is standing on the plate! When no pot or pan has been put on the plate, the appliance will switch off immediately for safety reasons. Always test your pots and pans with a magnet beforehand – if the magnet sticks to the pot or pan, it is suitable.

GENERAL USE

• Put usable cooking utensils in the middle of the plate and plug in the appliance.
  • As soon as the appliance is plugged in, the LED light indicator is on.
  • Turn the dial – up to the desired stage (1-5).

Step	Setting		Remark
Make the appliance ready for use	- Put a pot or pan on the cooking plate- Plug in the appliance- Put the silver dial on the desired position (1-5). Your cooking plate can be adjusted from minimum to maximum.
Stage 1- one LED is on		Stage 1	400 watt
Stage 2- two LED's are on		Stage 2	900 watt
Stage 3-one LED is on		tage 3	1200 watt
Stage 4-two LED's are on			1500 watt
Stage 5-one LED is on			2000 watt

Example:

1. Boiling water

• Put a pot filled with the desired amount of water in the middle of the cooking plate.
• Put the plug into the electric socket, the LED lamps light up and a short sound signal indicates that the appliance is energized.
• Now turn the dial. Another sound signal sounds and the control light for the power stage lights up.
• The water will be brought to a quick boil. Then switch off the cooking plate (by turning the dial anticlockwise towards the off-position "AUS" – audible through a small click – and unplug the appliance).

Usable cooking utensils (magnetic):

Steel or cast iron, enamelled iron, stainless steel, flat pans/pots with a diameter of ca. 13 to 18cm.

Unusable cooking utensils:

Heat-resistant glass, ceramic moulds (casserole dish), copper, aluminium, pans/pots with a rounded bottom (not flat – e.g. a wok) or pans/pots with a diameter of less than 13 cm.

CLEANING

• Before cleaning, unplug and wait for the appliance to cool down.
• Wipe the appliance only with a moistened cloth or sponge.
• Do not clean with any abrasive scouring pad or steel wool, as this will damage the finish.
• Do not immerse in water or any other liquid.

TECHNICAL DATA

Power: 2000 W

Tension: 230V\~50Hz

TKG IKP 800 - 100511

Overheating protection

The induction cooking plate is equipped with an overheating protection.

If your cooking plate overheats (empty pot or pan), a prolonged bleep will sound. After a few minutes the cooking function will switch off automatically.

Turn the dial towards the off-position „AUS“ and wait 1 to 3 minutes.

Then your induction cooking plate will be ready for use again.

If you take the pot or pan from the plate during use, a bleep will sound as well and the lamps will flash as a warning. Always switch off the appliance first before taking away the pot or pan.

PROTECTION OF THE ENVIRONMENT - DIRECTIVE 2002/96/EC

In order to preserve our environment and protect human health, the waste electrical and electronic equipment should be disposed of in accordance with specific rules with the

implication of both suppliers and users. For this reason, as indicated by the symbol on the rating label or on the packaging, your appliance should not be disposed of as unsorted municipal waste. The user has the right to bring it to a municipal collection point performing waste recovery by means of reuse, recycling or use for other applications in accordance with the directive.

FR MODE D'EMPLOI

POUR VOTRE SECURITE

Copies of the I/B. Please reproduce them without any changes except under special instruction from Team International BELGIUM. The pages must be reproduced and folded in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm height). When folding, make sure you keep the good numbering when you turn the pages of the I/B. Don't change the page numbering. Keep the language integrity.

TKG IKP 800 - 100511

TKG IKP 800