SKME 150 A1 - Coffee grinder SILVERCREST - Free user manual and instructions

USER MANUAL SKME 150 A1 SILVERCREST

Operating instructions

FR BE

1. Overview ......2
2. Intended purpose ....4
3. Safety instructions ....5
4. Items supplied 9
5. Operation ......9

5.1 Assembly.... 10
5.2 Tips on the degree of grinding and quality ..... 10
5.3 Operating the device 11

1. Cleaning 12
2. Storage 13
3. Troubleshooting ....14
4. Disposal 15
5. Technical specifications ....15
6. Warranty of the HOYER Handel GmbH .....16

1. Overview

1 Lid
2 Grinding space
3 Blades
4 Connector cable with mains plug
5 Motor unit
6 Switch
7 ⏻ ⏻ Marking for the locking ( ) and unlocking mechanism ( )
8 Attachment markings
9 Cable spool (at the bottom)

2

GB

Thank you for your trust!

Congratulations on the purchase of your new coffee grinder.

For a safe handling of the product and in order to get to know the entire scope of features:

• Thoroughly read these operating instructions prior to initial use.
• Above all, observe the safety instructions!
• The device should only be used as described in these instructions.
• Keep these operating instructions for information purposes.
• If you pass the device on to someone else, please include these operating instructions. The operating instructions are a part of the product.

We hope that you enjoy using your new coffee grinder!

Symbol on your device

The food-safe material of devices with this symbol will not change the taste or smell of food.

3

2. Intended purpose

The coffee grinder is exclusively suited for grinding coffee and espresso beans.

The device is designed for private, domestic use. The device must only be used indoors.

This device must not be used for commercial purposes.

Foreseeable misuse

We recommend the following maximum operating time:

Coffee beans:

3 x 30 seconds with a 1-minute break each in between; afterwards, 60 minutes break to cool the device.

Espresso beans:

2 x 45 seconds with a 1-minute break each in between; afterwards, 60 minutes break to cool the device.

The device could be damaged by an extended, continuous operating time.

4

3. Safety instructions

Warnings

If necessary, the following warnings will be used in these operating instructions:

DANGER! High risk: failure to observe this warning may result in injury to life and limb.

WARNING! Moderate risk: failure to observe this warning may result in injury or serious material damage.

CAUTION: low risk: failure to observe this warning may result in minor injury or material damage.

NOTE: circumstances and specifics that must be observed when handling the device.

Instructions for safe operation

• This device must not be used by children.
• Children must not play with the device.
• The device and the power cable must be kept away from children.
• This device can be used by people with restricted physical, sensory or intellectual abilities or people without adequate experience and/ or understanding if they are supervised or instructed on how to use this device safely and if they are aware of the resulting risks.

- Disconnect the mains plug from the wall socket ...

... when it is not supervised,

... before you assemble or disassemble the device, and

... before you clean the device.

• Clean all parts and surfaces that will come into contact with food before using the device for the first time (see “Cleaning” on page 12).
• If the mains power cable of this device should become damaged, it must be replaced by the manufacturer, the manufacturer's customer service department or a similarly qualified specialist, in order to avoid any hazards.

DANGER for children

• Children must not play with packing material. Do not allow children to play with plastic bags. There is a risk of suffocation.
• Keep the device out of the reach of children.

DANGER to and from pets and livestock

Electrical devices can represent a hazard to pets and livestock. In addition, animals can also cause damage to the device. For this reason you should keep animals away from electrical devices at all times.

6

GB

DANGER! Risk of electric shock due to moisture

The device must never be operated in the vicinity of a bathtub, a shower, a filled hand basin or similar.
- The motor unit, the power cable and the mains plug must not be immersed in water or other liquids.
- Protect the motor unit from dampness and dripping and splashing water.
- Should liquids enter the motor unit, pull out the mains plug immediately. Have the device checked before reusing.
- Never touch the device with wet hands.
- If the device falls into water, disconnect the mains plug immediately. Only then is it safe to retrieve the device.

DANGER! Risk of electric shock

• Only plug the mains plug into the wall socket after the motor unit and the accessories have been assembled.
• Only connect the mains plug to a properly installed and easily accessible wall socket whose voltage corresponds to the specifications on the rating plate. The wall socket must continue to be easily accessible after the device is plugged in.
• Ensure that the power cable cannot be damaged by sharp edges or hot points. Do not wrap the power cable around the device.
• Even after it has been switched off, the device has not been completely disconnected from the mains. In order to fully disconnect it, pull out the mains plug.
• When using the device, ensure that the power cable cannot be trapped or crushed.
  To pull the mains plug out of the wall socket, always pull on the mains plug, and never on the power cable.

- Disconnect the mains plug from the wall socket ...

... if there is a fault,

... when you are not using the device,

... prior to any cleaning, and

... during thunderstorms.

• Do not use the device if there is visible damage to the device or the power cable.
• To avoid any risk, do not make modifications to the product.

DANGER! Risk of injury from cutting

• The blades are sharp. Please be very careful especially when cleaning them.
• Never reach into rotating blades. Do not touch rotating parts with spoons or similar utensils. Keep long hair or loose clothing away from rotating parts as well.
  The blade continues to rotate after the device is switched off. Wait until it becomes stationary before opening the lid.

WARNING! Risk of material damage

• Only use the original accessories.
• Do not use any astringent or abrasive cleaning agents.

8

4. Items supplied

1 coffee grinder
1 operating instructions

Unpacking

1. Remove all parts from the packaging.
2. Check that all parts are present and intact.

5. Operation

DANGER! Risk of injury from cutting!

• Never reach into the rotating blades 3. Do not touch rotating parts with spoons or similar utensils. Keep long hair or loose clothing away from rotating parts as well.
• Only press switch 6 after the lid 1 has been positioned correctly.
• The blade 3 continues to rotate after the device is switched off. Wait until it becomes stationary before opening the lid 1.

WARNING!

- In order to prevent damage to the device, interrupt the process immediately if the blade 3 is either turning with difficulty or not turning at all. Pull out the mains plug 4 and check if there is an obstruction in the grinding space 2.

GB

9

5.1 Assembly

1. Clean the device prior to its first use (see "Cleaning" on page 12).
2. Figure A: unwind a sufficient length of cable 4 from the cable spool 9.
3. Feed the connector cable 4 through the small opening in the bottom of the motor unit 5.
4. Place the device on a solid, flat surface.
5. Connect the mains plug 4 with a wall socket.

5.2 Tips on the degree of grinding and quality

• The degree of grinding depends on the quantity of coffee within the grinding space as well as the duration of grinding.
• Brief grinding produces a coarse ground coffee.
• The longer the grinding takes the finer the ground coffee.
• Espresso beans must be ground longer (45 seconds), since very fine ground coffee is required for espresso.
• Try different quantities until you find the one right for you. Indication:
• 7 g of beans are approximately required for 1 cup of coffee
• 20 g of espresso beans are approximately required for 2 cups of espresso

5.3 Operating the device

1. Open the lid 1 and remove it. For this purpose, turn it so that the attachment marking ▼8 is positioned above the symbol 🔒7.
2. Fill the desired amount of beans into the grinding space 2. Do not fill in more than 50 ~g of coffee- or espresso beans.
3. Figure B: put the lid 1 onto the opening of the grinding space 2 and close it. For this purpose, turn it so that the attachment marking ▼8 is positioned above the symbol 🔒7.

NOTE: for your own safety, the device can only be started with the lid 1 positioned correctly.
4. Press the switch 6 and keep it pressed.

- Duration for coffee beans: up to max. 30 seconds

- Duration for espresso beans: up to max. 45 seconds

NOTE: read the instructions of your espresso/ coffee machine regarding the required degree of grinding.

1. Release the switch 6 when the desired degree of grinding is reached. Wait until the blades 3 are at a standstill.
2. Pull out the mains plug 4 and open the lid 1.
3. Take the ground coffee out with a spoon.

11

Two abstract geometric diagrams: one with a central dot and intersecting lines, the other with radiating lines (no text or symbols)

6. Cleaning

Clean the device prior to its first use!

DANGER! Risk of electric shock!

- Pull the mains plug 4 out of the wall socket before you clean the device.

- The motor unit 5, the connector cable 4 and the mains plug must not be immersed in water or other liquids.

DANGER! Risk of injury from cutting!

- When cleaning the grinding space 2 ensure not to touch the blade 3. It is very sharp.

WARNING! Risk of material damage!

• Do not use any astringent or abrasive cleaning agents.
• None of the parts may be cleaned in the dishwasher.

Grinding space

After each application, clean the grinding space 2 with a dry cloth or a brush.

Wiping off

Wipe off the motor unit 5 with a slightly damp cloth. In case of heavy soiling, put some detergent on the cloth. Then, remove any detergent residues with a clean cloth. Prior to the next use, the motor unit 5 must be completely dry.

Washing off

• The lid 1 can be washed by hand in warm water with detergent.
  • Afterwards, rinse the lid 1 with clean water.
  • Dry the lid 1 carefully before putting it back on.

12

GB

7. Storage

DANGER for children! Keep the device out of the reach of children.

DANGER! In order to avoid accidents, the mains plug 4 must never be connected to a wall socket while in storage.

• Select a location where neither high temperatures nor moisture can affect the device.
  • Figure A: wind the connector cable 4 around the cable spool 9 in the bottom.

13

8. Troubleshooting

If your device fails to function as required, please try this checklist first. Perhaps there is only a minor problem, and you can solve it yourself.

DANGER! Risk of electric shock! Do not attempt to repair the device yourself under any circumstances.

Fault Possible causes / Action
No function	Has the device been connected to the power supply?Check the connection.Has the lid 1 been positioned correctly? Without lid or with an incorrectly positioned lid 1 the device cannot be switched on.
Blade not turning or turning with difficulty.	Switch off immediately, pull out mains plug 4 and check if there is an obstacle in the grinding space.

9. Disposal

This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products

identified with this symbol may not be discarded with normal household waste, but must be taken to a collection point for recycling electric and electronic appliances. Recycling helps to reduce the consumption of raw materials and protect the environment.

Packaging

When disposing of the packaging, make sure you comply with the environmental regulations applicable in your country.

10. Technical specifications

Model: SKME 150 A1
Mains voltage:	220-240 V ~ 50/60 Hz
Protection class: II
Power rating: 150 W
max. capacity: 50 g

Subject to technical modification.

15

11. Warranty of the HOYER Handel GmbH

Dear Customer,

your device is provided with a 3 year warranty starting with the purchase date. In the event of product defects, you are entitled to statutory rights against the vendor. These statutory rights are not restricted by our warranty presented in the following.

Warranty conditions

The warranty period starts with the purchase date. Please keep the original purchase receipt in a safe place. This document is required to verify the purchase.

If within three years from the purchase date of this product a material or factory defect occurs, the product will be repaired or replaced by us – at our discretion – free of charge to you. This warranty implies that within the period of three years the defective device and the purchase receipt are presented, including a brief written description of the defect and the time it occurred. If the defect is covered by our warranty, the repaired or a new product will be returned to you. No new warranty period starts with a repair or replacement of the product.

Warranty period and statutory claims for defects

The warranty period is not extended when the warranty has been claimed. This also applies to replaced and repaired parts. Any damages and defects already existing at the time of purchase must be reported immediately upon unpacking. Repairs arising after the expiration of the warranty period are subject to a charge.

Warranty coverage

The device was produced carefully according to strict quality guidelines and tested diligently prior to delivery.

The warranty applies to material or factory defects.

Excluded from the warranty are wear parts subject to normal wear and damages to fragile parts, e.g. switches, batteries, lamps or other parts manufactured from glass.

This warranty expires if the product is damaged, not used as intended or not serviced. For the proper operation of the product, all instructions listed in the operating instructions must be observed carefully. Any form of use and handling that is advised against in the operating instructions or warned against must always be avoided.

The product is only intended for private and not for commercial use. In the case of incorrect and improper treatment, use of force and interventions not performed by our authorised Service Centre, the warranty shall cease.

Handling in case of a warranty claim

In order to ensure prompt processing of your matter, please observe the following notes:

• Please keep the article number IAN: 282269 and the purchase receipt as a purchase verification for all inquiries.
• The article number can be found on the rating plate, an engraving, the title page of your instructions (in the bottom left), or as a label on the rear or underside of the device.
• If faulty operation or other defects occur, first contact the Service Centre listed in the following by telephone or email.

- Then, you are able to send a product reported as defective free of charge to the service address specified to you, including the purchase receipt and the information on the defect and when it occurred.

Please visit www.lidl-service.com to download this and many other manuals, product videos and software.

Service Centre

GB Service Great Britain

Tel.: [phone] (£ 0.10/ Min.)

E-Mail: [e-mail]

IE Service Ireland

Tel.: [phone]

(0,08 EUR/ Min., (peak)), (0,06 EUR/ Min., (off peak))

E-Mail: [e-mail]

CY Service Cyprus

Tel.: [phone]

E-Mail: [e-mail]

IAN: 282269

Supplier

Please note that the following address is no service address. First contact the aforementioned Service Centre.

HOYER Handel GmbH

Tasköprüstraße 3

22761 Hamburg / Germany

18

Color palette bar with grayscale swatches and a central dot (no text or symbols)

HOYER HANDEL GMBH

Tasköprüstraße 3

22761 Hamburg

Germany

Status of information · Informationernes stand · Version des informations ·