Moto Q8 - Smartphone MOTOROLA - Free user manual and instructions

USER MANUAL Moto Q8 MOTOROLA

Step 1: Charge up & power on

Note: Before use, charge until the light turns green.

Power

2 Step 1: Charge up & power on en

Step 2: Get the right fit

en Step 2: Get the right fit 3

Step 3: Pair your headphones

Pair with Motorola Connect

Note: You can use this app on most devices with Android 4.3 or later. If your device is not compatible with Motorola Connect, follow the steps in “Pair with BluetoothTM” on page 5.

1 Download the free Motorola Connect app from Google Play™ Store.
2 Turn on your headphones.
3 Open Motorola Connect, touch +, and select your headphones from the list of devices.

Tip: You can also use Motorola Connect to check your battery, see the last known location where you connected, or get more help.

Pair with Bluetooth™

Pair without the Motorola Connect app.

1

Turn on Bluetooth on your device.

2

Turn on your headphones.

Headphones light blinks blue.

3

On your device, go to the Bluetooth menu to pair & connect. Enter 0000 if prompted.

4

When the device and headphones connect, you'll hear a tone.

Headphones light is solid blue.

Music

Note: Playing the next or previous track depends on your phone's music controls.

6 Music en

Calls

Incoming call:

In a call:

en Calls 7

Voice Control

This feature uses your phone’s voice control app.

Note: voice control may not work on some devices or in all languages

Press & hold to start voice control.

Note: Using a mobile device or accessory while driving may cause distraction and may be illegal. Always obey the laws and drive safely.

Advanced

Status Lights

On/Off fading blue

Pairing mode blinking blue

Connected solid blue

Low battery blinking red

Full charge solid green

Charging solid red

Press + and - together to check the charge level (while not in a call).

Charge level:

• Red: Low, 0-19%

• Yellow: Medium, 20-70%

• Green: High, 71-100%

Note: Your battery is designed to last the life of the product. It should only be removed by a recycling facility. Any attempt to remove or replace your battery may damage the product and void your warranty.

10 Advanced en

Reset

Turn off Bluetooth for all connected devices. Turn on the headphones, then press and hold all three buttons until the status light shows alternating red and blue. You'll hear a tone.

Second device

Do you use a phone and a tablet? Connect with both of them at the same time.

1 Pair to your first device using the steps in “Pair with BluetoothTM” on page 5.
2 Turn off Bluetooth on your first device (your phone, tablet, or computer).
3 Turn off the headphones. Then turn them back on.
4 Pair to your second device using the steps in “Pair with BluetoothTM” on page 5.
5 On your first device, turn Bluetooth back on to connect to it simultaneously. You'll hear a tone when the first device connects.

Tip: To switch and play audio from the second connected device, pause the current music device and then press play on the second device.

Help

• Get help: Visit www.motorola.com/support.
• Find regulatory markings: carefully remove the right earphone cover to expose the FCC and other regulatory markings for your device.

MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. All other product or service names are the property of their respective owners.

© 2015 Motorola Mobility LLC. All rights reserved.

Caution: Motorola does not take responsibility for changes/modification to the transceiver.

Bluetooth ID: D025976

Product ID: Model S505

Manual Number: 68017952002-A

lisez-moi d'abord

Vos écouteurs

8 Commande vocale fr-CA

Avancé

Voyant d'etat

• Obtenir de l'aide : Visitez le www.motorola.com/support.
• Find regulatory markings: carefully remove the right earphone cover to expose the FCC and other regulatory markings for your device.