PERFETTO - Iron Melchioni - Free user manual and instructions

USER MANUAL PERFETTO Melchioni

The validity of the guarantee starts from the purchasing date certified by the seller's stamp and expires at the end of the indicated period, even when the device has not been used. The guarantee covers all substitutions or repairs due to material or manufacturing defects. The guarantee has no validity in case of device tampering or when the defect is due to incorrect or improper use of the same. Substitutions and repair covered by the guarantee are made free of any charge for goods delivered free our service company representative. Only the freight will he at buyer's expense. All replaced parts or devices will become our property.

GARANTIE

Carefully read the requirements in this manual and keep in a safe place.

It contains important instructions on the safety, use and future of your appliance.

This appliance is only (or domestic use and must only to be used for the purpose it was specifically designed: and that is for the ironing of fabrics.

Any other use is to be considered improper and therefore dangerous. The constructor cannot be held responsible for eventual damages occurring from improper, wrong and unreasonable uses. The installation must be effected as by the constructors' prescriptions. A wrong installation can cause damages to persons, animals and things. The constructor cannot be help responsible of this. The safety of the electric appliances is guaranteed only if these are connected to an electric network supplied with suitable earthing as by what has been agreed upon by the actual standards in force concerning the electric safety.

The packing elements (plastic bags, nails, expanded polystyrene. etc...) must not be left at reach of children or disabled as they represent a potential source of danger.

Before connecting the appliance make sure that the data on the rating label ore the some as the mains supply of your home.

In case of incompatibility between the socket and the plug contact qualified personnel in order to effect the necessary changes

In general the use of adaptors, multiple sockets and/or extensions are unadvisable.

If their use is absolutely necessary, use only materials in conformity with the laws in force concerning the safety and having the requirements of compatibility with appliance and electric network.

The use of any electric appliance requires the respect of a few fundamental rules and in particular:

• Do not immerge the appliance in water.
• Do not touch the appliance with wet or damp hands
• Do not use the appliance barefooted
• Do not unplug the appliance by pulling on the appliance or the cable - always use the plug itself.

• Do not leave the appliance exposed to atmospheric agents (rain, sun).
  We recommend to not leave the appliance at the reach of children or disabled and do not allow them to use it.

• Always disconnect the plug from the socket when it is not used or before effecting any cleaning or maintenance operation.

The feeding cable must always be unrolled for all its length. This in order to avoid overheating. In case of damaged feeding cable, foresee to the replacement, which must be effected by qualified personnel.

In case of damage and/or bad functioning turn off the appliance and contact qualified personnel.

Any tampering or operation affected by unqualified personnel make you loose the right of guarantee.

• Before using the iron for the first time, make sure that you have removed all the labels or protection films from the plate. Clean the plate using a soft cloth.
• Some parts of the iron are slightly lubricated and therefore the appliance, at the moment of the first lighting up, could give out a bit of smoke. This smoke will stop in a short time.
• Always keep the ironing plate "B" always smooth; do not make it slide on metallic objects (ex. Iron support grid, metal buttons, zippers, etc..)
• Do not leave water in the machine when the room temperature is 00C or below.
• Do not fill the appliance under a running top.
• Do not allow the supply cable to come into contact with the ironing plate.
• Do not overfill the water tank and do not add stainremovers or similar products to the water.
• The boiler must never be moved during operation.
• Never unscrew the boiler cap when the appliance is connected to the power supply network.
• Use a funnel to fill the boiler without causing the water to overflow.
• The boiler must be placed on a flat surface that is particularly resistant to high temperature. After each use, wait until the iron is completely cold and always empty the reservoir from remaining water.

ATTENTION:

The anti-limestone cleaning effected by service centres is not covered by the guarantee it is therefore at charge of the customer.

ATTENTION:

Only pour distilled or demineralised water into the tank.

ATTENTION: NEVERUSETAPWATER

Tap water with impurities and limescale deposits may obstruct the holes of the plate

ATTENTION:

If the need should arise to clean the limescale deposits (not covered by warranty and therefore at the expense of the Customer), it is recommended to use scale removers specifically for irons. Follow the product instructions for the method of use.

ATTENTION:

If using at high room temperatures, the appliance will discharge invisible dry steam when the iron and the steam discharge settings are at the highest temperature.

Reduce the steam power if you want moister and more visible steam.

• Warranty does not cover any glass parts of the product.

ATTENTION:

Warranty does not cover any plastic parts of the product.

ATTENTION:

The damages of the power supply cord, originate by the wear aren't covered by guarantee; the repair will be in charge to the owner.

ATTENTION:

If the need should arise to take or send the appliance to an authorised service centre, make sure to clean all its parts thoroughly. If the appliance is only slightly dirty or encrusted or should present food deposits, scale deposits, dust or the like, externally or internally: for health reasons, the service centre shall reject the appliance without making any controls or repairs.

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point (or the recycling of electrical and electronic equipment). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

PARTS

A) Transparent water tank
B) Stainless steel ironing plate
C) Spray nozzle
D) Tank window
E) Steam control +/-
F) Spray button
G) Button for steam jet
H) Thermostat
L) Indicating light
M) Cup

INSTRUCTIONS FOR USE

To prevent overloads to the electricity network, do not use at the same time as other high-voltage appliances on the same circuit.

TEMPERATURE CONTROL

Look for the "Iron" symbol on the garments with the dots indicating the correct temperature to set on the thermostat of your appliance. Follow these instructions. If the garment does not have any care instructions, refer to the following table:

• Nylon and acetate
• Wool, silk or mixed fabrics
  Cotton, linen (steam)

These indications relate to the fabric of the garment and not to any applications in other materials such as embroideries, designs, etc. Fabrics with decorations applied (embossed designs, fabric designs, embroideries) must be ironed at a moderate temperature.

If the fabric consists of various fibres, always choose the temperature suitable to the fibre that requires the lowest temperature.

DRY IRONING

Insert the plug into a compatible power outlet (the indicating light (L) will light up).

Position (E) on "0" to exclude the steam discharge.

Rotate the thermostat (H) until the preselected temperature indication coincides with the reference triangle on the tank. The indicating light (L) turns off when the set temperature is reached.

After checking that the temperature set is the one most suitable to the type of fabric, start ironing.

FILLING OF THE WATER TANK

IMPORTANT: to be carried out with the plug disconnected and the regulator (E) on the "O" position which excludes the steam discharge; open the window (D). Using the cup with the spout (M) slowly fill the tank (A) with water (do not use additives). Rest the iron in a vertical position and make sure the amount of water does not exceed the MAX level indicated on the tank.

STEAM IRONING

With the tank full (as indicated in the previous paragraph), insert the plug into a compatible power outlet.

Regulate the thermostat (H) to the maximum temperature (indicated by the symbol ...).

Wait for the indicating light (L) to turn off signalling that the temperature has been reached.

Steam ironing is only possible at an elevated temperature, otherwise water may leak foam the sole plate (B). Set the amount of steam desired via the steam control (E).

At this point, it is possible to start steam ironing until the water is used up.

After use and before storing the appliance away, disconnect the plug from the power outlet and empty the tank.

USE OF THE SPRAY

The spray function can be used with both steam ironing and dry ironing; press button (F) to activate. It may be necessary to press it more than once at the beginning.

STEAM JET

The steam jet provides added assistance in eliminating particularly stubborn creases.

With the thermostat (H) on “…” and the indicating light (L) off, position the steam control (E) at the lowest temperature, press the button (G) to obtain the steam jet (it may be necessary to press it more than once at the beginning). Wait a few seconds before using another steam jet, so that the steam can penetrate into the fabric. Note: do not subject the item to mare than three consecutive steam jets.

CLEANING

With the plug disconnected and the iron cold, clean the appliance and the stainless steel plate with a soft cloth. Any operations for cleaning scale deposits are not covered by the warranty, and therefore are at the expense of the customer.

F

AVERTISSEMENTS GÉNÉRAUX