SalonDry Compact HP4962 - Hair dryer PHILIPS - Free user manual and instructions

Product type	Compact hair dryer
Brand	Philips
Model	SalonDry Compact HP4962
Power supply	220-240 V ~ (mains voltage suitable)
Power	1600 W
Temperature settings	2 levels (low and high)
Speed settings	2 levels (gentle and strong airflow)
Cool shot function	Yes, cool air button
Included accessories	Concentrator nozzle
Overheat protection	Yes, automatic shut-off
Power cord length	1.8 m (approx.)
Weight	550 g
Dimensions (L x W x H)	22 x 8 x 18 cm
Cleaning	Dry cloth for the device, damp cloth for accessories
Usage	Household, natural hair
Warranty	2 years (subject to conditions)
Certification	Compliant with EMC standards

Frequently Asked Questions - SalonDry Compact HP4962 PHILIPS

How to use the cool shot function on the Philips SalonDry Compact HP4962?

After drying, simply press the cool air button (mark E) for a final cold blast. This seals the hair cuticle and adds shine.

The hair dryer stops automatically during use, what should I do?

This is normal: the overheat protection has activated. Unplug the device, let it cool down for a few minutes, then check that the air inlets are not blocked by hair or dust before restarting.

Can I use the Philips SalonDry Compact HP4962 in the bathroom?

Yes, but with caution: do not use it near a bathtub, washbasin, or sink. Unplug after use because even when switched off, proximity to water can pose a risk. A socket protected by a 30 mA residual current device is recommended.

How to clean the Philips HP4962 hair dryer?

Always unplug the device. Clean the body with a dry cloth. For the concentrator, use a damp cloth or rinse it with water. Make sure it is dry before reusing or storing. Never immerse the device in water.

What is the difference between the two speed settings?

The 'II' position is a strong airflow for fast drying. The 'I' position provides a gentle airflow, ideal for shaping and styling.

The power cord is damaged, can I replace it myself?

No, if the cord is damaged, it must be replaced by Philips, a Philips Service Center, or a qualified technician to avoid any hazard.

How to store the hair dryer after use?

Make sure it is switched off, unplugged, and cooled down. Place it in a safe location. Do not wrap the cord around the device to avoid damage.

Can I use accessories from other brands with this model?

It is recommended to only use Philips accessories or those specifically recommended by Philips. Using other accessories may void the warranty and pose risks.

The hair dryer does not work at all, what should I check?

First check that the socket is powered. Then ensure the device voltage matches your mains supply. If the cord is damaged or the device overheated, follow the troubleshooting tips in the manual or contact an authorized service center.

How to use the supplied concentrator?

Attach the concentrator to the front of the hair dryer (fig. 6). It directs the airflow to the brush or comb for precise styling. To remove it, simply pull it off.

USER MANUAL SalonDry Compact HP4962 PHILIPS

Register your product and get support at www.philips.com/welcome

HP4963, HP4962, HP4961, HP4960

Black and white HPV HPV compact hair dryer with no visible text or symbols on the device body

PHILIPS

Diagram of a folded panel with grid patterns and directional arrows indicating movement (no text or symbols)

B A C E D F 2

ENGLISH 6

FRANÇAIS 11

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. The SalonDry Compact from Philips has been specially designed to offer you comfortable and reliable drying. It has a compact and lightweight design, making it easy to use. The strong airflow dries your hair quickly, giving it the shine, body and richness you love.

You can visit our website at www.philips.com for more information about this product or other Philips products.

Important

Read this user manual carefully before you use the appliance and save it for future reference.

Danger

- Keep the appliance away from water. Do not use it near or over water contained in baths, washbasins, sinks etc. When you use the appliance in a bathroom, unplug it after use. The proximity of water presents a risk, even when the appliance is switched off (Fig. 1).

Warning

• Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance.
• Check the condition of the mains cord regularly. Do not use the appliance if the plug, the mains cord or the appliance itself is damaged.
• If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

Caution

• For additional protection, we advise you to install a residual current device (RCD) in the electrical circuit that supplies the bathroom. This RCD must have a rated residual operating current not higher than 30mA. Ask your installer for advice.
• Never block the air grilles.
• This appliance is equipped with an overheat protection device. If the appliance overheats, it switches off automatically. Unplug the appliance and let it cool down for a few minutes. Before you switch on the appliance again, check the grilles to make sure they are not blocked by fluff, hair, etc.
• Always switch off the appliance before you put it down, even if it is only for a moment.
• Always unplug the appliance after use.
• Do not wind the mains cord round the appliance.
• Never use any accessories or parts from other manufacturers or that Philips does not specifically recommend. If you use such accessories or parts, your guarantee becomes invalid.
• Do not insert metal objects into the air grilles to avoid electric shock.
• Keep the hairdryer clean and free of dust, dirt and styling products such as mousse, spray and gel.
• Do not use the appliance on artificial hair.
• Do not use the appliance for any other purpose than described in this manual.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today.

General description (Fig. 2)

Concentrator

Air outlet grille

Air inlet grille

Rocker switch with 2 heat/speed settings and off position

ENGLISH8

E Cool shot button (HP4962 only)
F Volume diffuser (HP4963 only)

Using the appliance

Drying

1 Put the plug in the wall socket.
2 Select the desired setting to switch on the appliance (Fig. 3).

- ll: Strong airflow for fast drying

- I: Gentle airflow especially intended for styling

- O: Off

3 To dry your hair, make brushing movements with the hairdryer at a small distance from the hair (Fig. 4).
4 HP4962 only: When you have finished drying, press the cool shot button for a cool airflow. This closes the cuticles and adds shine to the hair (Fig. 5).

Concentrator

The concentrator enables you to direct the airflow straight at the brush or comb with which you are styling your hair.

1 Snap the concentrator onto the appliance (Fig. 6).

- To disconnect the concentrator, pull it off the appliance.

Volume diffuser (HP4963 only)

The volume diffuser has been specially developed to gently dry both straight and curly or wavy hair.

1 To connect the volume diffuser, snap it onto the appliance. (Fig. 7) To disconnect the volume diffuser, pull it off the appliance.
2 To add volume at the roots, insert the pins into your hair in such a way that they touch your scalp (Fig. 8).
3 Make rotating movements with the appliance to distribute the warm air evenly through your hair (Fig. 9).

Cleaning

Always unplug the appliance before you clean it.

Do not immerse the appliance in water nor rinse it under the tap.

1 Make sure the appliance is switched off and unplugged.
2 Remove the attachment from the appliance before you clean it.
3 Clean the appliance with a dry cloth.
4 Clean the attachment with a moist cloth or rinse it under the tap.

Note: Make sure the attachment is dry before you use or store it.

Storage

Never wind the mains cord round the appliance.

1 Make sure the appliance is switched off and unplugged.
2 Put the appliance in a safe place and let it cool down before you store it.

Environment

- Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. 10).

Guarantee & service

If you need service or information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, go to your local Philips dealer.

Troubleshooting

If problems arise with your hairdryer and you cannot solve them with the information below, please contact the nearest Philips service centre or the Philips Consumer Care Centre in your country.

Problem Solution

The appliance does not work at all.	Perhaps the socket to which the appliance has been connected is not live. Make sure the socket is live.
	The appliance may have overheated and switched itself off. Unplug the appliance and let it cool down for a few minutes. Before you switch on the appliance again, check the grilles to make sure they are not blocked by fluff, hair, etc.
	The appliance may not be suitable for the voltage to which it has been connected. Make sure that the voltage indicated on the type plate of the appliance corresponds to the local mains voltage.
	The mains cord may be damaged. If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.

Introduction